The ring pivots 180° to secure loads in various directions. Also known as lashing rings.

Accommodate ties in any direction with these rings that swivel all the way around and pivot 180°.

Accommodate ties in any direction with these rings that swivel all the way around.

Dimples hold the base tight to prevent it from swiveling.

Large holes in the base allow adhesive to flow through.

Also known as footman's loops, use these guides to prevent webbing from twisting, or as anchor points in tie-down applications.

No need for drilling or welding—these guides mount with adhesive.

Two rotating cams pinch and hold rope as you pull it through to provide a temporary hold.

Use these guides to position a rope.

Permanently sew webbing onto these buckles.

Permanently sew webbing onto these buckles.

The slotted bar on these buckles allows you to attach an eye easily.

Permanently sew webbing onto these hooks.

Use the split in the hook to slide a loop on and off these fittings.

Add a slide to webbing to make adjustable straps.

Quickly increase and release tension over loads: lift the cam on the buckle, pull the webbing through, and release the cam to hold webbing in place.

The ring pivots to secure loads in various directions.

Use these brackets to mount wooden 2×4 beam for economical load bracing.

Use these short lengths to tether material or with a coupling to add extra length to a ratchet strap.

Contain and organize bulky and oddly shaped loads with these nets.

These rings pivot to secure loads in various directions.

Slide fittings between slots on this track for quick adjustments. Also known as logistics track or L-track.

These straps have a ratchet buckle that tightens incrementally for maximum tension.

Contain and organize bulky and oddly-shaped loads with these nets.

Attach these hooks to elastic cord to make a tie down.

Adjust the location of the hook along the cord.

Position these locks anywhere along a length of cord to create stops or separate cord from contact surfaces.