Mounting Hole Diameter Mounting Hole Diameter |
|---|
|
|
|
Capacity Capacity |
|---|
|
Base Material Base Material |
|---|
|
Movement Movement |
|---|
 |  |
| 90° Pivot | 180° Pivot |
 |  |
| 360° Swivel | Rigid |
Inner Ring Width Inner Ring Width |
|---|
|
|
|
Material Material |
|---|
|
Mounting Hole Center-to-Center Length Mounting Hole Center-to-Center Length |
|---|
|
|
|
Ring Material Ring Material |
|---|
|
For Mounting Screw Size For Mounting Screw Size |
|---|
|
|
|
Base Width Base Width |
|---|
|
|
|
Ring Height Ring Height |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Tie-Down Rings
These rings pivot to secure loads in various directions.
Style L accept carriage bolts with a square neck. The neck shape keeps bolts from turning when tightening with a nut.
Style N have a loose ring that twists to minimize abrasion on webbing and rope.
Zinc-plated steel and powder-coated steel rings have mild corrosion resistance.
18-8 stainless steel rings have good corrosion resistance.
316 stainless steel rings have excellent resistance to salt water and chemicals.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Dia. | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Lg. | Each | |
Zinc-Plated Steel | ||||||||||||||||
| A | 500 | 2" | 2 1/4" | 1/4" | D-Ring | __ | 1 5/16" | 1 5/8" | Zinc-Plated Steel | No | 1 | 13/32" | __ | __ | 0000000 | 00000 |
| A | 1,000 | 1 7/16" | 1 1/2" | 1/4" | D-Ring | __ | 1 5/8" | 1 3/8" | Zinc-Plated Steel | No | 1 | 7/16" | __ | __ | 00000000 | 0000 |
| C | 200 | 1 9/16" | 1 13/16" | 3/16" | D-Ring | 4 1/8" | __ | __ | Zinc-Plated Steel | No | 2 | 9/32", 13/32" | __ | 1 1/16" | 00000000 | 0000 |
| D | 500 | 2" | 2 1/4" | 1/4" | D-Ring | 4 1/16" | __ | __ | Polypropylene Plastic | No | 3 | 9/32", 13/32" | __ | 1 3/16" | 0000000 | 0000 |
| E | 400 | 1 1/2" | 1 11/16" | 1/4" | D-Ring | __ | 2 3/16" | 1 1/4" | Zinc-Plated Steel | No | 2 | 1/4" | __ | 1 1/4" | 0000000 | 0000 |
| E | 800 | 1" | 1 13/16" | 1/4" | D-Ring | __ | 2 1/8" | 13/16" | Zinc-Plated Steel | No | 2 | 9/32" | __ | 1 3/8" | 0000000 | 0000 |
| E | 1,000 | 1 1/2" | 1 3/8" | 1/4" | D-Ring | __ | 1 5/8" | 1 1/4" | Zinc-Plated Steel | No | 2 | 1/4" | __ | 15/16" | 0000000 | 0000 |
| E | 1,000 | 1 1/2" | 1 13/16" | 1/4" | D-Ring | __ | 1 9/16" | 1 1/4" | Zinc-Plated Steel | No | 2 | 1/4" | __ | 7/8" | 00000000 | 0000 |
| E | 1,500 | 2" | 2 1/8" | 1/4" | D-Ring | __ | 2 1/8" | 1 7/8" | Zinc-Plated Steel | No | 2 | 1/4" | __ | 1 3/8" | 00000000 | 0000 |
| J | 3,500 | 2 5/16" | 1 3/4" | 5/16" | D-Ring | __ | 2 1/8" | 1 7/8" | Zinc-Plated Steel | No | 4 | 1/4" | 1 1/4" | 1 1/8" | 0000000 | 00000 |
| J | 3,500 | 3 3/16" | 3 3/4" | 5/16" | D-Ring | __ | 2 3/16" | 2 1/2" | Zinc-Plated Steel | No | 4 | 1/4" | 1 3/8" | 1 3/4" | 0000000 | 00000 |
Red Powder-Coated Steel | ||||||||||||||||
| M | 6,940 | 1 9/16" | 5 1/8" | 11/16" | Link | __ | 5 1/8" | 1 1/2" | Powder-Coated Steel | Yes | 2 | 11/16" | __ | 3 1/2" | 0000000 | 00000 |
| M | 11,680 | 1 15/16" | 6 3/4" | 7/8" | Link | __ | 6 1/2" | 1 7/8" | Powder-Coated Steel | Yes | 2 | 7/8" | __ | 4 1/2" | 0000000 | 00000 |
Steel | ||||||||||||||||
| L | 4,080 | 2 3/8" | 3 1/2" | 1/2" | D-Ring | __ | 3" | 1 3/4" | Steel | No | 2 | 13/32" | __ | 2" | 0000000 | 00000 |
18-8 Stainless Steel | ||||||||||||||||
| A | 400 | 1 1/2" | 1 1/2" | 3/16" | D-Ring | __ | 1 5/16" | 1 1/8" | 18-8 Stainless Steel | No | 1 | 3/8" | __ | __ | 00000000 | 0000 |
| E | 400 | 1" | 1 1/2" | 3/16" | D-Ring | __ | 2" | 5/8" | 18-8 Stainless Steel | No | 2 | 9/32" | __ | 1 3/8" | 00000000 | 00000 |
| G | 1,000 | 1 1/2" | 1 1/2" | 1/4" | D-Ring | __ | 2 1/4" | 2" | 18-8 Stainless Steel | No | 3 | 9/32" | 1 1/2" | 1 1/4" | 00000000 | 00000 |
| G | 1,500 | 2" | 2 1/8" | 5/16" | D-Ring | __ | 3" | 2 1/2" | 18-8 Stainless Steel | No | 3 | 11/32" | 2" | 1 1/2" | 00000000 | 00000 |
| H | 1,500 | 9/16" | 1 3/16" | 1/4" | D-Ring | __ | 1 5/8" | 1 3/4" | 18-8 Stainless Steel | No | 3 | 1/4" | 9/16" | 9/16" | 00000000 | 00000 |
| H | 2,500 | 1 3/8" | 1 3/8" | 5/16" | D-Ring | __ | 2 3/16" | 2 1/4" | 18-8 Stainless Steel | No | 3 | 5/16" | 1 3/8" | 1 3/8" | 00000000 | 00000 |
| H | 5,000 | 2 5/16" | 2 1/16" | 3/8" | D-Ring | __ | 2 5/8" | 2 15/16" | 18-8 Stainless Steel | No | 3 | 13/32" | 1 3/4" | 1 3/4" | 00000000 | 000000 |
316 Stainless Steel | ||||||||||||||||
| A | 50 | 13/16" | 7/8" | 1/8" | D-Ring | __ | 13/16" | 11/16" | 316 Stainless Steel | No | 1 | 1/4" | __ | __ | 00000000 | 0000 |
| E | 210 | 1 17/32" | 1 5/16" | 0.23" | D-Ring | __ | 2" | 1 1/8" | 316 Stainless Steel | No | 2 | 1/4" | __ | 1 11/32" | 00000000 | 0000 |
| F | 1,200 | 1 3/32" | 1 1/8" | 1/4" | D-Ring | __ | 1 1/2" | 1" | 316 Stainless Steel | No | 2 | 7/32" | __ | 15/16" | 00000000 | 00000 |
| F | 2,000 | 1 15/32" | 1 5/16" | 5/16" | D-Ring | __ | 1 15/16" | 1 3/8" | 316 Stainless Steel | No | 2 | 5/16" | __ | 1 1/4" | 00000000 | 00000 |
| F | 4,000 | 1 15/16" | 1 9/16" | 3/8" | D-Ring | __ | 2 1/2" | 1 3/4" | 316 Stainless Steel | No | 2 | 13/32" | __ | 1 5/8" | 00000000 | 00000 |
| N | 5,620 | 1 5/16" | 3 1/4" | 11/16" | Round | __ | 2" | 1 3/4" | 316 Stainless Steel | No | 1 | 3/8" | __ | __ | 00000000 | 00000 |
Swiveling Tie-Down Rings
Accommodate ties in any direction with these rings that swivel all the way around.
Style B has a loose ring that twists to minimize abrasion on webbing and rope.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Ctr.-to-Ctr. Wd. | For Mounting Screw Size | Each | |
18-8 Stainless Steel | ||||||||||||||||
| A | 200 | 5/8" | 1 9/32" | 3/16" | Round | 1 3/16" | 1 1/4" | 18-8 Stainless Steel | No | 4 | 5/32" | 7/8" | 11/16" | No. 8 | 0000000 | 00000 |
| A | 300 | 3/4" | 1 9/16" | 1/4" | Round | 1 9/16" | 1 5/16" | 18-8 Stainless Steel | No | 4 | 5/32" | 1" | 3/4" | No. 8 | 0000000 | 0000 |
| A | 480 | 3/4" | 1 13/16" | 5/16" | Round | 1 15/16" | 1 9/16" | 18-8 Stainless Steel | No | 4 | 7/32" | 1 3/8" | 1" | No. 10 | 0000000 | 0000 |
| B | 200 | 1 3/16" | 2 1/2" | 3/16" | Round | 1 3/16" | 1 1/4" | 18-8 Stainless Steel | No | 4 | 5/32" | 7/8" | 11/16" | No. 8 | 00000000 | 0000 |
| B | 300 | 1 9/16" | 3 1/8" | 1/4" | Round | 1 9/16" | 1 5/16" | 18-8 Stainless Steel | No | 4 | 5/32" | 1" | 3/4" | No. 8 | 00000000 | 0000 |
| B | 480 | 1 15/16" | 3 3/4" | 5/16" | Round | 1 15/16" | 1 9/16" | 18-8 Stainless Steel | No | 4 | 7/32" | 1 3/8" | 1" | No. 10 | 00000000 | 00000 |
Recessed Tie-Down Rings
These rings mount flush and fold down when not in use.
Straight rings have a flat section that prevents webbing from twisting.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
For Cutout | Ring | Base | Mounting Hole | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Dp. | Lg. | Wd. | Dia. | For Max. Webbing Wd. | Inner Wd. | Ht. | Thick. | Lg. | Wd. | Dia. | Material | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Lg. | No. of | Each | |
Zinc-Plated Steel | |||||||||||||||||||
Round Ring | |||||||||||||||||||
| 1,660 | 1" | 2 7/8" | 2 7/8" | __ | __ | 1 3/8" | 1 3/4" | 7/16" | 4 7/8" | 4 1/2" | __ | Zinc-Plated Steel | No | 13/32" | 3" | 3 1/4" | 4 | 0000000 | 00000 |
D-Ring | |||||||||||||||||||
| 2,000 | 1" | __ | __ | 4 1/2" | __ | 3 3/8" | 1 13/16" | 5/16" | __ | __ | 6 1/4" | Zinc-Plated Steel | No | 11/32" | 3 13/16" | 3 13/16" | 4 | 0000000 | 00000 |
D-Ring and Straight Ring | |||||||||||||||||||
| 830 | 1" | __ | __ | 4 1/2" | 2" | 2 7/8", 2 1/8" | 1 1/2", 1 3/16" | 3/8", 3/8" | __ | __ | 6 1/4" | Zinc-Plated Steel | No | 11/32" | 3 13/16" | 3 13/16" | 4 | 0000000 | 00000 |
Dimpled Tie-Down Rings
Dimples hold the base tight to prevent it from swiveling.
Style B has loose rings that twist to minimize abrasion on webbing and rope.
Zinc-plated steel rings have mild corrosion resistance.
304 stainless steel rings have good corrosion resistance.
316 stainless steel rings have excellent chemical and corrosion resistance, so they won’t rust in marine environments.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Each | |
Style A | ||||||||||||
Zinc-Plated Steel | ||||||||||||
| 5,600 | 1 1/4" | 1 1/4" | 1/2" | Round | 2 3/8" | 2" | Zinc-Plated Steel | No | 1 | 3/8" | 00000000 | 00000 |
304 Stainless Steel | ||||||||||||
| 6,700 | 1 3/16" | 1 1/4" | 1/2" | Round | 2 3/8" | 1 11/16" | 304 Stainless Steel | No | 1 | 3/8" | 00000000 | 0000 |
316 Stainless Steel | ||||||||||||
| 5,620 | 1 1/4" | 1 1/4" | 1/2" | Round | 2 3/8" | 2" | 316 Stainless Steel | No | 1 | 3/8" | 00000000 | 00000 |
Style B | ||||||||||||
316 Stainless Steel | ||||||||||||
| 5,620 | 1 1/4" | 3 1/2" | 3/8" | Round | 2 1/2" | 2" | 316 Stainless Steel | No | 1 | 3/8" | 00000000 | 00000 |
Webbing Guides
Use these guides to prevent webbing from twisting, or use as anchor points in tie-down applications. They are also known as footman's loops.
Nylon plastic guides are chemical and oil resistant, nonconductive, and lightweight.
High-carbon steel guides are stronger and more scratch resistant than stainless steel guides. However, unfinished carbon steel is not corrosion resistant and should be used indoors.
Stainless steel guides have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Guides with a zinc plating have mild corrosion resistance. Guides with a nickel plating resist chemicals and salt water, and have a decorative metallic finish.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Capacity | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Color | Pkg. Qty. | Pkg. | |
| 5/16" | 230 lbs. | 1 7/8" | 1/2" | 1/4" | 1/4" | No | 2 | 3/16" | 1 13/32" | Black | 10 | 0000000 | 00000 |
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated Low-Carbon Steel | |||||||||||
| 1" | 2 5/8" | 1/2" | 1/4" | 1/4" | No | 2 | 1/4" | 2 1/8" | 10 | 0000000 | 00000 |
| 1 1/2" | 3 1/16" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 2 5/8" | 10 | 0000000 | 0000 |
| 1 1/2" | 3 1/8" | 1/2" | 1/4" | 7/16" | No | 2 | 1/4" | 2 5/8" | 10 | 0000000 | 00000 |
| 2" | 3 5/8" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 3 1/8" | 10 | 0000000 | 00000 |
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Webbing Wd. | Lg. | Wd. | Wd. at Ctr. | Inner Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated High-Carbon Steel | |||||||||||
| 1" | 2 5/8" | 1/2" | 1/4" | 1/4" | No | 2 | 7/32" | 2 1/8" | 1 | 0000000 | 00000 |
| 1" | 2 5/8" | 1/2" | 1/4" | 5/8" | No | 2 | 7/32" | 2 1/8" | 1 | 0000000 | 0000 |
| 1 1/4" | 2 3/4" | 1/2" | 1/4" | 1/4" | No | 2 | 1/4" | 2 1/4" | 1 | 0000000 | 0000 |
| 1 1/2" | 3 1/8" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 2 5/8" | 1 | 0000000 | 0000 |
| 2" | 4 1/4" | 5/8" | 5/16" | 1/2" | No | 2 | 9/32" | 3 5/8" | 1 | 0000000 | 0000 |
Nickel-Plated High-Carbon Steel | |||||||||||
| 2" | 3 5/8" | 1/2" | 1/4" | 5/16" | No | 2 | 1/4" | 3 1/8" | 1 | 0000000 | 0000 |
Webbing Anchor Plates
Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.
Zinc-plated steel plates have mild corrosion resistance.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Tie-On Metal Engraving and Stamping Plates
Use the holes in all four corners for bundling or to tie these plates to equipment when bolting isn’t an option.
Aluminum plates are lightweight and corrosion resistant.
304 stainless steel plates resist corrosion better than aluminum plates.
For technical drawings and 3-D models, click on a part number.
Write-On Plates
These plates have a smudgeproof surface that you can write on with permanent marker. They are flexible and have holes at all four corners, so you can use them for bundling or tie them to your equipment when bolting isn’t an option.
For technical drawings and 3-D models, click on a part number.