Filter by
    System of Measurement
    Maximum Torque
    Square Drive Size
    Attribute Image
    Minimum Torque
    Head Style
    Industrial Info Snippet
    Industrial Info Snippet
    Ratcheting or Nonratcheting
    Industrial Info Snippet
    Industrial Info Snippet
    Wrench Style
    Torque Adjustability
    Industrial Info Snippet
    Industrial Info Snippet
    Application
    Industrial Info Snippet
    Industrial Info Snippet
    Overall Length
    Certification
    Graduations
    Torque-Limiting Mechanism
    Industrial Info Snippet
    Industrial Info Snippet
    Torque-Limiting Direction
    Clockwise Accuracy
    Material
    Power Source
    Grip Material
    Torque Setting
    Counterclockwise Accuracy
    Display
    Industrial Info Snippet
    Industrial Info Snippet
    Industrial Info Snippet
    Grip Style
    Performance Properties
    Industrial Info Snippet
    Industrial Info Snippet
    Industrial Info Snippet
    Industrial Info Snippet
    Industrial Info Snippet
    Industrial Info Snippet
    Industrial Info Snippet
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    436 Products
    Torque Limiting
    Torque Limiting
    Torque Measuring
    Torque Measuring
    Torque Adjustability
    Grip Style
    Performance Properties
    Performance Properties

    Click-Style Adjustable Torque Wrenches

    Twist the handle to set the torque within a range to meet the task at hand—adjust the setting as your needs change. When you reach the torque setting, you’ll hear a click.
    Ratcheting or Nonratcheting
    • Ratcheting—To save time and effort, a ratchet mechanism lets you tighten fasteners without removing or repositioning the wrench.
    • Nonratcheting—These wrenches are an economical alternative to ratcheting torque wrenches, but you have to reposition them after every turn.
    Head Style
    • Standard—These wrenches have a typical fixed head.
    • Flex—Pivot the head to access fasteners in tight spots that a wrench with a standard, fixed head might not be able to reach.
    Standard
    Square
    Drive
    Size
    Torque Range
    Graduations
    Clockwise
    Accuracy
    Counterclockwise
    Accuracy
    Overall
    Length
    Ratcheting
    or
    Nonratcheting
    Head
    Style
    Flex
    Range
    of
    Motion
    Material
    Grip
    Material
    Specifications Met
    Certification
    Each
    in.-lbs.
    Ratcheting
    1/4"10 to 50 in.-lbs.1 in.-lbs.±4%__11 1/4"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A113$216.91
    3/8"30 to 150 in.-lbs.2 in.-lbs.±4%__11 3/4"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A212224.02
    3/8"40 to 200 in.-lbs.2 in.-lbs.±4%__11 3/4"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A215224.02
    3/8"150 to 750 in.-lbs.5 in.-lbs.±4%±6%16"RatchetingStandard__Chrome-Plated SteelRubber__Calibration Certificate with Test Data Traceable to NIST85555A216205.06
    3/8"150 to 750 in.-lbs.5 in.-lbs.±4%±6%16"NonratchetingStandard__Chrome-Plated SteelRubber__Calibration Certificate with Test Data Traceable to NIST85555A515171.89
    1/2"700 to 1,600 in.-lbs.10 in.-lbs.±4%±6%19"RatchetingStandard__Chrome-Plated SteelRubber__Calibration Certificate with Test Data Traceable to NIST85555A219211.11
    in.-lbs., Nm
    Ratcheting
    1/4"10 to 50 in.-lbs.
    1.08 to 5.4 Nm
    0.5 in.-lbs.
    0.06 Nm
    ±4%±6%10"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A114173.03
    1/4"10 to 50 in.-lbs.
    1.08 to 5.4 Nm
    0.5 in.-lbs.
    0.06 Nm
    ±4%±6%10"NonratchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A511149.08
    1/4"30 to 150 in.-lbs.
    3.06 to 15.3 Nm
    1 in.-lbs.
    0.12 Nm
    ±4%±6%10"RatchetingStandard__Chrome-Plated SteelRubber__Calibration Certificate with Test Data Traceable to NIST85555A115174.65
    1/4"30 to 150 in.-lbs.
    3.06 to 15.3 Nm
    1 in.-lbs.
    0.12 Nm
    ±4%±6%10"NonratchetingStandard__Chrome-Plated SteelRubber__Calibration Certificate with Test Data Traceable to NIST85555A512155.04
    3/8"30 to 150 in.-lbs.
    3.06 to 15.3 Nm
    1 in.-lbs.
    0.12 Nm
    ±4%±6%10"RatchetingStandard__Chrome-Plated SteelRubber__Calibration Certificate with Test Data Traceable to NIST85555A213174.77
    3/8"30 to 150 in.-lbs.
    3.06 to 15.3 Nm
    1 in.-lbs.
    0.12 Nm
    ±4%±6%10"NonratchetingStandard__Chrome-Plated SteelRubber__Calibration Certificate with Test Data Traceable to NIST85555A513159.29
    3/8"50 to 250 in.-lbs.
    5.54 to 27.7 Nm
    1 in.-lbs.
    0.12 Nm
    ±4%±6%11 1/4"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A214173.03
    3/8"50 to 250 in.-lbs.
    5.54 to 27.7 Nm
    1 in.-lbs.
    0.12 Nm
    ±4%±6%11 1/4"NonratchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A514154.35
    3/8"200 to 1,000 in.-lbs.
    22.04 to 110.2 Nm
    5 in.-lbs.
    0.6 Nm
    ±4%±6%16"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A217184.36
    3/8"200 to 1,000 in.-lbs.
    22.04 to 110.2 Nm
    5 in.-lbs.
    0.6 Nm
    ±4%±6%16"NonratchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A516170.13
    1/2"150 to 750 in.-lbs.
    16.38 to 81.9 Nm
    5 in.-lbs.
    0.6 Nm
    ±4%±6%16"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A218210.51
    1/2"150 to 750 in.-lbs.
    16.38 to 81.9 Nm
    5 in.-lbs.
    0.6 Nm
    ±4%±6%16"NonratchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A517196.46
    1/2"300 to 2,500 in.-lbs.
    39.6 to 276.9 Nm
    10 in.-lbs.
    1.2 Nm
    ±4%±6%18"RatchetingStandard__Chrome-Plated SteelMetal__Calibration Certificate with Test Data Traceable to NIST85555A221328.47
    ft.-lbs.
    3/8"10 to 80 ft.-lbs.0.5 ft.-lbs.±4%±6%16 3/4"RatchetingFlex30°Chrome-Plated SteelRubber__Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A711208.47
    1/2"30 to 250 ft.-lbs.__±3%__25 1/4"RatchetingFlex30°Chrome-Plated SteelAluminumASME B107.300, ISO 6789__7885N111234.98
    ft.-lbs., Nm
    Ratcheting
    3/8"5 to 75 ft.-lbs.
    10.2 to 98.3 Nm
    0.5 ft.-lbs.
    0.7 Nm
    ±4%±6%16"RatchetingStandard__Chrome-Plated SteelMetal__Calibration Certificate with Test Data Traceable to NIST85555A311180.03
    3/8"5 to 75 ft.-lbs.
    19.66 to 98.3 Nm
    0.5 ft.-lbs.
    0.7 Nm
    ±4%±6%16"NonratchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A611173.58
    3/8"20 to 100 ft.-lbs.
    26.44 to 132.2 Nm
    0.5 ft.-lbs.
    0.7 Nm
    ±4%±6%16"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A312184.36
    3/8"20 to 100 ft.-lbs.
    26.44 to 132.2 Nm
    0.5 ft.-lbs.
    0.7 Nm
    ±4%±6%16"NonratchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A612171.91
    1/2"30 to 150 ft.-lbs.
    39.4 to 197 Nm
    1 ft.-lbs.
    1.4 Nm
    ±4%±6%19"RatchetingStandard__Chrome-Plated SteelRubber__Calibration Certificate with Test Data Traceable to NIST85555A316215.13
    1/2"30 to 150 ft.-lbs.
    39.4 to 197 Nm
    1 ft.-lbs.
    1.4 Nm
    ±4%±6%19"NonratchetingStandard__Chrome-Plated SteelRubber__Calibration Certificate with Test Data Traceable to NIST85555A613194.44
    1/2"30 to 250 ft.-lbs.
    47 to 332 Nm
    1 ft.-lbs.
    1.4 Nm
    ±4%±6%24 1/2"RatchetingStandard__Chrome-Plated SteelRubber__Calibration Certificate with Test Data Traceable to NIST85555A319266.03
    1/2"50 to 250 ft.-lbs.
    66.4 to 332 Nm
    1 ft.-lbs.
    1.4 Nm
    ±4%±6%23 1/2"NonratchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A614205.62
    1/2"50 to 250 ft.-lbs.
    66.4 to 332 Nm
    1 ft.-lbs.
    1.4 Nm
    ±4%±6%24 1/2"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A318215.62
    3/4"80 to 400 ft.-lbs.
    85 to 491 Nm
    5 ft.-lbs.
    3.4 Nm
    ±4%±6%34 1/2"RatchetingStandard__Chrome-Plated SteelMetal__Calibration Certificate with Test Data Traceable to NIST85555A321695.72
    3/4"100 to 600 ft.-lbs.
    169 to 779 Nm
    5 ft.-lbs.
    6.8 Nm
    ±4%±6%42"RatchetingStandard__Chrome-Plated SteelRubber__Calibration Certificate with Test Data Traceable to NIST85555A322784.98
    3/4"120 to 600 ft.-lbs.
    154 to 770 Nm
    5 ft.-lbs.
    6.8 Nm
    ±4%±6%42"NonratchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A615541.55
    3/4"220 to 750 ft.-lbs.
    300 to 1,000 Nm
    5 ft.-lbs.
    10 Nm
    ±3%±3%49 1/2"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to UKAS85555A3241,384.62
    3/4"370 to 1,100 ft.-lbs.
    500 to 1,500 Nm
    10 ft.-lbs.
    10 Nm
    ±3%±3%62"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to UKAS85555A3251,461.54
    1"140 to 700 ft.-lbs.
    217 to 976 Nm
    24 in.-lbs.
    2.71 Nm
    ±4%±6%48"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A3261,030.18
    1"200 to 1,000 ft.-lbs.
    264.4 to 1,322 Nm
    5 ft.-lbs.
    6.8 Nm
    ±4%±6%70"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A3271,093.45
    1"200 to 1,000 ft.-lbs.
    264.4 to 1,322 Nm
    5 ft.-lbs.
    6.8 Nm
    ±4%±6%70"NonratchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A616957.45
    1"370 to 1,100 ft.-lbs.
    500 to 1,500 Nm
    10 ft.-lbs.
    10 Nm
    ±3%±3%62"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to UKAS85555A3281,576.92
    Nm
    1/4"4 to 20 Nm0.2 Nm±4%Not Rated10 1/8"RatchetingStandard__Chrome-Plated Steel____Calibration Certificate with Test Data Traceable to NIST85555A111236.19
    Quick Release
    Instead of pulling the socket off the tool, just push the button to release it.
    Square
    Drive
    Size
    Torque Range
    Graduations
    Clockwise
    Accuracy
    Counterclockwise
    Accuracy
    Overall
    Length
    Ratcheting
    or
    Nonratcheting
    Head
    Style
    Material
    Grip
    Material
    Certification
    Each
    in.-lbs.
    3/8"30 to 150 in.-lbs.1 in.-lbs.±4%±6%10"RatchetingStandardChrome-Plated Steel__Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A211$168.06
    in.-lbs., Nm
    1/4"30 to 150 in.-lbs.
    3.06 to 15.3 Nm
    1 in.-lbs.
    0.12 Nm
    ±4%±6%10"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A411168.06
    3/8"50 to 250 in.-lbs.
    5.54 to 27.7 Nm
    1 in.-lbs.
    0.12 Nm
    ±4%±6%11 1/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A412174.73
    3/8"50 to 250 in.-lbs.
    5.54 to 27.7 Nm
    1 in.-lbs.
    0.12 Nm
    ±4%±6%11 1/4"RatchetingStandardChrome-Plated Steel__Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A413172.17
    3/8"150 to 1,000 in.-lbs.
    19.8 to 110.2 Nm
    5 in.-lbs.
    0.6 Nm
    ±4%±6%16"RatchetingStandardChrome-Plated SteelMetalCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A414220.08
    ft.-lbs.
    1/2"30 to 150 ft.-lbs.1 ft.-lbs.±4%±6%19"RatchetingStandardChrome-Plated Steel__Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A314200.95
    ft.-lbs., Nm
    3/8"5 to 75 ft.-lbs.
    10.2 to 98.3 Nm
    0.5 ft.-lbs.
    0.7 Nm
    ±4%±6%16"RatchetingStandardChrome-Plated Steel__Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A415184.38
    3/8"10 to 100 ft.-lbs.
    16.9 to 132.2 Nm
    0.5 ft.-lbs.
    0.7 Nm
    ±4%±6%16"RatchetingStandardChrome-Plated SteelMetalCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A416206.35
    1/2"20 to 150 ft.-lbs.
    34 to 197 Nm
    1 ft.-lbs.
    1.4 Nm
    ±4%±6%19"RatchetingStandardChrome-Plated SteelMetalCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A417222.58
    1/2"30 to 150 ft.-lbs.
    39.4 to 197 Nm
    1 ft.-lbs.
    1.4 Nm
    ±4%±6%19"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A418189.45
    1/2"30 to 250 ft.-lbs.
    47 to 332 Nm
    1 ft.-lbs.
    1.4 Nm
    ±4%±6%24 1/2"RatchetingStandardChrome-Plated SteelMetalCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A421265.25
    1/2"40 to 200 ft.-lbs.
    54 to 271 Nm
    1 ft.-lbs.
    1.4 Nm
    ±4%±6%19"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A419200.01
    1/2"50 to 250 ft.-lbs.
    66.4 to 332 Nm
    1 ft.-lbs.
    1.4 Nm
    ±4%±6%24 1/2"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration85555A422197.87
    No Reset
    Move from job to job quickly since you don't have to reset these wrenches between each use. They stay accurate even though they don't have an internal spring that can wear out like other torque wrenches. They’re also known as split-beam torque wrenches.
    Square
    Drive
    Size
    Torque Range
    Graduations
    Clockwise
    Accuracy
    Counterclockwise
    Accuracy
    Overall
    Length
    Ratcheting
    or
    Nonratcheting
    Head
    Style
    Flex
    Range
    of
    Motion
    Material
    Certification
    Each
    ft.-lbs.
    Flex Head
    3/8"10 to 50 ft.-lbs.1 ft.-lbs.±4%__17 1/4"RatchetingFlex12°Chrome-Plated SteelCalibration Certificate with Test Data Traceable to NIST5387A73$249.54
    3/8"20 to 100 ft.-lbs.24 in.-lbs.±4%__17 3/4"RatchetingFlex15°Chrome-Plated SteelCalibration Certificate with Test Data Traceable to NIST5387A22249.54
    1/2"40 to 250 ft.-lbs.5 ft.-lbs.±4%__22 1/2"RatchetingFlex15°Chrome-Plated SteelCalibration Certificate with Test Data Traceable to NIST5387A25268.35
    3/4"200 to 600 ft.-lbs.10 ft.-lbs.±4%±4%48 1/2"RatchetingStandard__Chrome-Plated SteelCalibration Certificate with Test Data Traceable to NIST5387A56474.04
    Nonsparking
    Made of beryllium copper, these wrenches can be used in areas where flammable vapors and combustible residues are present. Do not use these tools in direct contact with acetylene.
    Square
    Drive
    Size
    Torque Range
    Graduations
    Clockwise
    Accuracy
    Counterclockwise
    Accuracy
    Overall
    Length
    Ratcheting
    or
    Nonratcheting
    Head
    Style
    Material
    Grip
    Material
    Specifications
    Met
    Each
    ft.-lbs., Nm
    1/2"22 to 110 ft.-lbs.
    16 to 150 Nm
    0.1 ft.-lbs.
    0.1 Nm
    ±4%±4%20 1/2"RatchetingStandardBeryllium CopperPlasticBAM Certified2826N51$2,474.00
    Electrical Insulating
    Two layers of insulation protect against accidental contact with high-voltage circuits when tightening connections on electrical equipment, such as bus bars, battery racks, and power panels. These wrenches are tested to 1,000 volts and meet IEC 60900 standards for insulated hand tools.
    Square
    Drive
    Size
    Torque Range
    Graduations
    Clockwise
    Accuracy
    Counterclockwise
    Accuracy
    Overall
    Length
    Ratcheting
    or
    Nonratcheting
    Head
    Style
    Material
    Grip
    Material
    Specifications
    Met
    Certification
    Each
    in.-lbs.
    1/4"30 to 150 in.-lbs.1 in.-lbs.±4%±6%10 1/2"RatchetingStandardPlastic-Coated SteelPlasticIEC 60900Calibration Certification Traceable to NIST7936A11$498.20
    3/8"30 to 150 in.-lbs.1 in.-lbs.±4%±6%10 1/2"RatchetingStandardPlastic-Coated SteelPlasticIEC 60900Calibration Certification Traceable to NIST7936A12498.20
    3/8"50 to 250 in.-lbs.1 in.-lbs.±4%±6%11 1/8"RatchetingStandardPlastic-Coated SteelPlasticIEC 60900Calibration Certification Traceable to NIST7936A13544.14
    ft.-lbs., Nm
    1/2"6 to 44 ft.-lbs.
    8 to 60 Nm
    1 ft.-lbs.
    1 Nm
    ±3%±3%14"RatchetingStandardPlastic-Coated SteelPlasticIEC 60900Calibration Certificate with Test Data Traceable to UKAS7936A15494.08

    Click-Style Fixed Torque Wrenches

    To ensure the same torque is reached every time, these wrenches come with a fixed torque. You’ll hear a click when the torque is reached.
    3D CAD models availableFor technical drawings and 3-D models, click on a part number.
    Square
    Drive
    Size
    Torque Setting
    Clockwise
    Accuracy
    Overall
    Length
    Ratcheting
    or
    Nonratcheting
    Head
    Style
    Material
    Grip
    Material
    Certification
    Each
    in.-lbs.
    1/4"10 to 50 in.-lbs.±4%7 1/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A811$194.55
    1/4"30 to 150 in.-lbs.±4%7 1/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A813197.33
    3/8"30 to 150 in.-lbs.±4%7 7/8"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A815208.87
    3/8"60 to 300 in.-lbs.±4%10 3/8"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A817217.55
    3/8"150 to 750 in.-lbs.±4%14 3/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A819237.33
    1/2"360 to 1,800 in.-lbs.±4%18 1/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A822271.53
    1/2"600 to 3,000 in.-lbs.±4%23"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A824309.20
    ft.-lbs.
    1/4"0.9 to 4.1 ft.-lbs.±4%7 1/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A812194.55
    1/4"2.5 to 12.5 ft.-lbs.±4%7 1/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A814197.33
    3/8"2.5 to 12.5 ft.-lbs.±4%7 7/8"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A816208.87
    3/8"5 to 25 ft.-lbs.±4%10 3/8"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A818217.55
    3/8"10 ft.-lbs.±4%8"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A501208.87
    3/8"10 ft.-lbs.±4%10 7/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A502217.55
    3/8"12.5 to 62.5 ft.-lbs.±4%14 3/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A821237.33
    3/8"15 ft.-lbs.±4%10 7/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A503217.55
    3/8"15 ft.-lbs.±4%14 13/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A504237.33
    3/8"20 ft.-lbs.±4%10 7/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A505217.55
    3/8"20 ft.-lbs.±4%14 13/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A506237.33
    3/8"25 ft.-lbs.±4%10 7/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A507217.55
    3/8"25 ft.-lbs.±4%14 13/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A508237.33
    3/8"30 ft.-lbs.±4%14 13/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A509237.33
    3/8"35 ft.-lbs.±4%14 13/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A511237.33
    3/8"40 ft.-lbs.±4%14 13/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A512237.33
    3/8"50 ft.-lbs.±4%14 13/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A513237.33
    1/2"30 to 150 ft.-lbs.±4%18 1/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A823271.53
    1/2"50 ft.-lbs.±4%18 1/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A514271.53
    1/2"50 to 250 ft.-lbs.±4%23"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A825309.20
    1/2"75 ft.-lbs.±4%22 7/8"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A516309.40
    1/2"100 ft.-lbs.±4%18 1/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A517271.53
    1/2"150 ft.-lbs.±4%22 7/8"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A518309.40
    Nm
    1/4"1.2 to 6 Nm±4%7 1/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A211194.55
    1/4"3 Nm±4%8"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A519194.55
    1/4"3.4 to 17 Nm±4%7 1/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A221197.33
    3/8"3.4 to 17 Nm±4%7 7/8"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A231208.87
    3/8"6.8 to 34 Nm±4%10 3/8"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A241217.55
    3/8"10 Nm±4%8"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A521208.87
    3/8"15 Nm±4%8"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A522208.87
    3/8"15 Nm±4%10 7/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A523217.55
    3/8"17 to 84.8 Nm±4%14 3/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A251237.33
    3/8"20 Nm±4%10 7/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A524217.55
    3/8"30 Nm±4%10 7/16"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A525217.55
    1/2"40.7 to 204 Nm±4%18 1/4"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A261271.53
    1/2"67.8 to 338.9 Nm±4%23"RatchetingStandardChrome-Plated SteelPlasticCalibration Certificate with Test Data Traceable to NIST Certificate of Calibration7152A271309.20

    Slip-Release-Style Fixed Torque Wrenches

    To prevent overtightening, these wrenches slip off and stop turning fasteners when you reach the fixed torque. They can’t be adjusted, so they ensure you reach the same torque every time.
    Ratcheting or Nonratcheting
    • Ratcheting—To save time and effort, a ratchet mechanism lets you tighten fasteners without removing or repositioning the wrench.
    • Nonratcheting—These wrenches are an economical alternative to ratcheting torque wrenches, but you have to reposition them after every turn.
    3D CAD models availableFor technical drawings and 3-D models, click on a part number.
    Standard
    T-Handle
    Turn fasteners in areas where there's no room to swing a standard wrench handle.

    Changeable-Head Click-Style Adjustable Torque Wrenches

    These wrenches offer the utility of five tools in one and let you adjust the torque setting as your needs change. Swap out heads to use them as open-end, box, square-drive, or hex-key wrenches. To set the torque within a range, twist the handle. When you reach the torque setting, you'll hear a click.
    3D CAD models availableFor technical drawings and 3-D models, click on a part number.
    Handles
    Attach different heads to these handles to suit your application.
    To switch from tightening to loosening fasteners, remove the head, turn the handle over, and reattach the head. The handle and head you choose may have different maximum torque values. Do not exceed the lower value.
    Square-Drive Heads
    Use these heads with sockets to tighten fasteners.
    Open-End Heads
    Fitting around fasteners instead of over them, the way box heads do, open-end heads are a good choice when reaching into tight spaces.
    Box Heads
    Since they wrap all the way around fasteners, box heads let you apply more torque and get a better grip on fasteners than open-end heads.
    Hex-Key Heads
    Turn fasteners with a hex-shaped drive using these heads.

    Changeable-Head Click-Style Fixed Torque Wrenches

    These wrenches give you the utility of five tools in one and come with a fixed torque to reach the same amount every time. Use them as open-end, box, square-drive, or hex-key wrenches by swapping out heads. You'll hear a click when you reach the torque setting.
    3D CAD models availableFor technical drawings and 3-D models, click on a part number.
    Handles
    Attach different heads to these handles to suit your application.
    To switch from tightening to loosening fasteners, remove the head, turn the handle over, and reattach the head. The handle and head you choose may have different maximum torque values. Do not exceed the lower value.
    Square-Drive Heads
    Use these heads with sockets to tighten fasteners.
    Open-End Heads
    Fitting around fasteners instead of over them, the way box heads do, open-end heads are a good choice when reaching into tight spaces.
    Box Heads
    Since they wrap all the way around fasteners, box heads let you apply more torque and get a better grip on fasteners than open-end heads.
    Hex-Key Heads
    Turn fasteners with a hex-shaped drive using these heads.

    Electronic Torque Wrenches

    To limit torque, these wrenches have lights and an alarm that warn when you reach or exceed your set torque. You can also use them to learn how much torque is needed to turn fasteners because their screen displays both torque as you apply it and the highest torque reached.
    Ratcheting or Nonratcheting
    • Ratcheting—To save time and effort, a ratchet mechanism lets you tighten fasteners without removing or repositioning the wrench.
    • Nonratcheting—These wrenches are an economical alternative to ratcheting torque wrenches, but you have to reposition them after every turn.
    Head Style
    • Standard—These wrenches have a typical fixed head.
    • Flex—Pivot the head to access fasteners in tight spots that a wrench with a standard, fixed head might not be able to reach.
    Standard
    Economy
    An affordable alternative to other electronic torque wrenches, these have a narrower torque range.
    Data Recording
    Store and recall up to 1,500 torque and angle measurements with these programmable wrenches. Create and save sequences of torque settings to repeat tasks where fasteners need varying amounts of torque.
    High Accuracy
    Ensure precise readings when measuring and applying torque with wrenches that are accurate to ±1%.

    Horizontal-Scale Torque Wrenches

    See how much torque you need to tighten and loosen fasteners without overtightening—these wrenches have a pointer that moves along a scale as you apply torque. They're also known as beam torque wrenches.
    3D CAD models availableFor technical drawings and 3-D models, click on a part number.
    Standard
    High Accuracy
    Ensure precise readings when measuring and applying torque with wrenches that are accurate to ±2%.

    Dial Torque Wrenches

    A main pointer on the dial shows torque as it’s applied, while a memory pointer keeps track of the maximum torque reached. Use these wrenches to find out how much torque you'll need to tighten and loosen fasteners.

    Air-Powered Torque Wrenches

    Faster than manual torque wrenches, these wrenches—also known as nutrunners—are commonly used in assembly applications. The motor stops or the clutch disengages to avoid exceeding the torque you set. For a secure hold, all have a pin-style (often called positive locking) socket retainer that fits into a matching hole in the socket. These wrenches operate at full torque in both clockwise and counterclockwise directions.
    Connect these wrenches to your shop air. They require lubrication to operate properly. Use them with impact sockets only.
    Pin-Style Socket Retainer
    back to top
    Explore Other Products