Thread the stud directly into a component or secure with a nut for through-hole mounting.

Support and guide loads on angle rails in food, pharmaceutical, and other sanitary environments. Also known as yoke-style cam followers, these track rollers offer more mounting flexibility than threaded alternatives and are typically mounted on shafts and clevis rod ends.

Guide loads along angle rail tracks in food and pharmaceutical plants or other sanitary environments.

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer.

Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places.

The soft rubber or plastic surface on these rollers creates less noise than the metal surfaces found on other track rollers.

Built to handle high speeds for their size. These track rollers have an outer ring that supports higher speeds than standard-sized track rollers.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

With dry-running PTFE sleeve bearings, these rollers don’t require lubricant. They’re also fully submersible, nonsparking, and lightweight.

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.

Made of 440C stainless steel, these shaft-mount track rollers resist corrosion in damp environments.

Install these rollers in worn-out mounting holes or where you don’t have access to the back of the mounting hole. The stud is tapered, so you can quickly secure them in place with a set screw instead of a nut on the back like traditional rollers.

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Support loads while guiding and positioning work with these steel rollers and guide rails.