Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places.

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

With dry-running PTFE sleeve bearings, these rollers don’t require lubricant. They’re also fully submersible, nonsparking, and lightweight.

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer.

The outer ring is built to handle higher speeds than standard shaft-mount track rollers.

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.

Shaft-mount track rollers have more mounting flexibility than threaded track rollers.

Choose the width you need from 6" to 60" in 1/16" increments.

Choose the width you need from 6" to 60" in 1/16" increments.

Made from stainless steel, these rollers are suitable for washdown applications. They have a standard 1.9" diameter to fit most roller conveyors.

These rollers have diameters 1 3/4" and below.

All stainless steel construction makes these rollers suitable for washdown applications. They have 2 1/2" diameters.

Rollers have a standard 1.9" diameter to fit most roller conveyors.

Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.

Improve tracking on curved conveyor sections. Rollers taper so packages maintain their orientation through the curve.

Rollers move in one direction so they won't roll back when idle, keeping packages in place.

" Rollers are grooved to accommodate round belts on line-shaft conveyors."

Rollers are tapered for use on curved conveyor sections.

Rollers have a standard 1.9" diameter to fit most roller conveyors.

We'll get the between frame width and sprocket spacing you need in 1/16" increments.

These rollers have 2 1/2" diameters.

These conveyors are designed to rest on a work surface instead of a stand.

Conveyors are made of corrosion-resistant stainless steel, making them suitable for washdown applications.

Replace worn and damaged bearings or press-fit bearings into tubing or pipe to create a roller.

Sleeve bearings ride directly on the axle and have no moving parts to wear out.

Mount to a conveyor frame to recondition a worn hex axle hole or to convert a round axle hole to a hex axle hole.

Covers fit loosely over the roller to allow packages to accumulate. Rollers can continue spinning inside the cover without causing damage to packages.

Replace the spools that hold round belts in place on line-shaft conveyors.

Also known as pallet brakes, these mount underneath rollers on a gravity conveyor and create friction on the rollers to control the conveyor's speed.

These ball transfers have capacities up to 2,200 lbs.

Unlike most ball transfers, which have metal balls, these have a plastic outer ball that rolls on stainless steel inner balls, so there's no metal-on-metal contact that could create and release particles into your clean room. They've also been ultrasonically cleaned and then individually bagged to prevent dust contamination.

These ball transfers have capacities up to 2,400 lbs.

The ball in these transfers is spring-loaded to absorb impact.

These ball transfers have capacities up to 2,200 lbs.

The flange has mounting holes for fastening.

These ball transfers have capacities up to 2,400 lbs.

The ball transfer or stop rises when you supply air and retracts into housing when air supply ceases.

Also known as ball-bearing parallels, these plates have multidirectional balls that project from the top and bottom to position and move small, heavy items over short distances.

Snap these ball transfers together like jigsaw pieces to create a custom ball transfer plate, or use them unconnected to create your own pattern for rotating and positioning material. They have magnets embedded in the frame, so you can mount them on any flat magnetic metal surface and rearrange them as your operations change.

Use these 2- to 3-foot conveyor sections alone or add to a roller conveyor to rotate and position material along a conveying line.

Use with conveying chain to automatically move these trolleys along the beam.

Track provides the runway for trolleys in manual and powered systems.

Push to move material along the conveyor.

Carry loads along a track with this series of smooth-rolling alternating vertical and horizontal wheels.

Carriers attach loads to the trolley chain with a scissor-like action and pivot as the conveyor makes elevation changes.

A rubber coating, also known as lagging, increases friction for a better grip on the belt.

Configure wheels where you need them on these economical rails that you can cut to length.

Rotate materials in any direction on these flow rails.

Create a low-profile conveying surface.

A flange on these wheels separates material while guiding it down the line.

An accordion-style frame lets you quickly curve, expand, and retract these conveyors. They have skate wheels for flat-bottom objects in assembly lines or packaging and shipping applications.

A slippery UHMW polyethylene surface means these rollers won't stick to adjacent parts. Rollers are also highly corrosion resistant.

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

These urethane rollers spin freely in one direction and lock to transmit power in the other. They are nonmarring and wear resistant.

These urethane rollers are nonmarring and wear resistant.

These urethane rollers are nonmarring and wear resistant.

The surface of these rollers is molded to a ±0.003" tolerance to provide more consistent surface contact.

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

These urethane rollers are nonmarring and wear resistant.

A good choice for oily environments, these Buna-N rollers are also abrasion resistant and nonmarring.

Install these rollers without the need for set screws or keyways.

Keep garage doors and other overhead doors rolling smoothly.

These complete sets contain everything you need to create a system for hanging doors.

Narrow track allows you to hang doors in tight spaces.

Built to withstand corrosive marine environments, track is anodized aluminum and hangers are 316 stainless steel.

These sets include everything you need to hang two doors that slide past each other.

Install these drawer slides in small-parts cabinets.

Slides only extend 3/4 of the closed length to reduce the chance that a heavy load will tip your cabinet.

Open drawers from either side of a cart or cabinet—these slides let drawers pass through for two-way access to contents.

These slides automatically pull the drawer closed when it approaches the closed position.

These slides provide full extension for convenient access to the back of your drawers.

Slides only extend 3/4 of the closed length to reduce the chance that a heavy load will tip your cabinet.

When you don't have enough clearance for side-mount or under-the-counter slides, mount these to the base of your drawer.

A stop holds the drawer closed; pull firmly on the drawer to open.

Sets include an upper and lower track for hanging lightweight cabinet doors that slide past each other.