These wheels have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.

Make your own wheels by cutting these wheel blanks to size with a band saw. They're easy to machine so you can create V-groove and flanged wheels, as well as conveyor rollers and pulleys.

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.

A flange on one side of the wheel keeps your equipment running on square structural tubing and other rails.

A flange on one side of the wheel keeps your equipment running on square structural tubing and other rails.

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system.

Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.

Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

Lubricated with graphite, these rollers can handle temperatures from -450° to 750° F—the widest temperature range of any track roller in our offering.

With dry-running PTFE sleeve bearings, these rollers don’t require lubricant. They’re also fully submersible, nonsparking, and lightweight.

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.

Made of 440C stainless steel, these shaft-mount track rollers resist corrosion in damp environments.

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Combine with a T-slotted rail to add linear motion to your assembly.

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

Nylon rollers and aluminum rails make these good for light duty applications.

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

These rollers spin freely in one direction and lock to transmit power in the other. Made of neoprene rubber, they are oil, flame, gasoline, and weather resistant.