Safety Disposal Cans for Nonflammable Acids and Corrosives
Store leftover hazardous liquids until they can be properly discarded. Made of plastic to resist harsh acids and corrosives, this safety disposal can has a self-closing cap to prevent spills and a trigger handle to empty contents with one hand.
| Capacity, gal. | Lg. | Wd. | Ht. | Fill Opening OD | Graduation Marks | Color | Each | |
Plastic | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 | 7 3/4" | 4 3/4" | 12 3/4" | 1 1/2" | 1 qt., 1 L, 1 gal. | Semi-Clear White | 0000000 | 000000 |
Food Industry Round Metal Batch Cans
Round Stainless Steel Batch Cans
Style A have clamps to hold lid down.
| Capacity, gal. | Dia. | Ht. | Bottom ID | Gauge | Appearance | Lid Type | Seal Material | Each | |
316 Stainless Steel  | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 3/4" | 7 1/4" | 7 1/8" | 23 | Polished | Tight Fitting | Silicone Rubber | 0000000 | 0000000 |
Rectangular Stainless Steel Batch Cans
Safety Cans
Also known as Type I safety cans, these have a single opening for both filling and pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; and a flame arrester.
Powder-coated steel cans are for petroleum-based liquids. Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.
Stainless steel cans are corrosion resistant and often used with liquids such as acetone, ether, toluene, and xylene.
Polyethylene plastic cans won't rust, dent, or pit and are for chemicals and corrosives.
| Style | Cap. | Lg. | Wd. | Ht. | Fill Opening Dia. | Specifications Met | Flammability Rating | Each | |
| D | 1 gal. | 8" | 4 3/4" | 13" | 1 1/2" | UL Listed, C-UL Listed, FM Approved, NFPA 30 | OSHA Compliant 29 CFR 1910.106, OSHA Compliant 29 CFR 1926.152 | 0000000 | 0000000 |
| Style | Cap. | Lg. | Wd. | Ht. | Fill Opening Dia. | Specifications Met | Color | Each | |
| F | 1 gal. | 7 3/4" | 4 3/4" | 12 3/4" | 1 5/8" | FM Approved | Red | 0000000 | 0000000 |
Safety Cans with Built-In Spout
Also known as Type II safety cans, these have two openings—one for filling, one for pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; flame arrester; and a vacuum-release valve for controlled pouring.
Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.
Pressurized Liquid Dispensing Tanks
Attach a compressed air source to pressurize liquids for dispensing and spraying. Tanks have a dip tube that draws liquid from the bottom of the tank. All tanks meet the ASME rating for pressure vessels.
304 stainless steel tanks have good corrosion resistance.
316 stainless steel tanks have excellent corrosion resistance.
Tanks that cannot be sold to the listed areas are restricted due to safety regulations.
Overall | Opening | Port | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, gal. | Max. Pressure @ 100°F, psi | Dia. | Ht. | Lg. | Wd. | Pipe Size | Thread Type | Gender | No. of | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Each | |
Tanks without Mounting Plate | ||||||||||||||
304 Stainless Steel | ||||||||||||||
| 1 | 142 | 9" | 9" | 4 7/8" | 5 7/8" | 1/4 | NPT | Female | 4 | -20° to 200° | ASME BPVC.VIII.1 | Canada | 00000000 | 0000000 |
| 1 | 205 | 9" | 8" | 3 1/4" | 3 7/8" | 1/4 | NPT | Female | 4 | -20° to 200° | ASME BPVC.VIII.1 | Canada | 00000000 | 000000 |
316 Stainless Steel | ||||||||||||||
| 1 | 132 | 9" | 8" | 4 7/8" | 5 7/8" | 1/4 | NPT | Female | 4 | -20° to 300° | ASME BPVC.VIII.1 | Canada | 00000000 | 000000 |
| 1 | 185 | 9" | 8" | 3 1/4" | 3 7/8" | 1/4 | NPT | Female | 4 | -20° to 300° | ASME BPVC.VIII.1 | Canada | 0000000 | 000000 |
Vacuum closure caps are required to use tanks in vacuum applications.
Syringe Loading Tanks
Fill syringes quickly without the mess—these tanks use compressed air to push viscous liquid into a syringe. They hold up to a gallon of material, so you can fill many syringes one after another. To fill a syringe, connect a compressed air source to the tank, twist a syringe onto the dispenser, and slowly turn the ball valve. If you’re using a manually powered syringe, check first to make sure the plunger is fully depressed. For air powered ones, check that the stopper is fully inserted.
Monitor the tank’s pressure with a built-in gauge. An included regulator works to hold the tank pressure around the recommended 100 psi. If the pressure gets too high, pull the tab on the release valve. To prolong the life of the material in your tank, you should release the pressure after filling your last syringe. These tanks cannot be sold to Canada due to safety regulations.
Overall | Inlet | Outlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, gal. | Max. Pressure @ 100° F | Dia. | Ht. | Opening Dia. | No. of Inlets | Coupling Size | Connection Style | Gender | No. of Outlets | Connection Type | Gender | Temp. Range, °F | Features | Cannot Be Sold To | Each | |
304 Stainless Steel | ||||||||||||||||
| 1 | 100 psi | 10" | 11 1/2" | 6" | 1 | 1/8 | Quick Disconnect | Male | 1 | Luer Lock | Female | -20° to 100° | Pressure Gauge, Safety Valve | Canada | 000000 | 000000000 |