Length Length |
|---|
Spring Type Spring Type |
|---|
 | Compression |
 | Die |
OD OD |
|---|
|
ID ID |
|---|
Energy Capacity Energy Capacity |
|---|
|
Material Material |
|---|
|
Compressed Length @ Maximum Load Compressed Length@ Maximum Load |
|---|
Maximum Load Maximum Load |
|---|
|
Spring Rate Spring Rate |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Mounting Hole Diameter (A) Mounting Hole Diameter (A) |
|---|
|
|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Width Width |
|---|
|
|
|
Compressed OD @ Maximum Load Compressed OD@ Maximum Load |
|---|
Mount Type Mount Type |
|---|
 |  |
| Clamp On | Hook and Loop |
 | |
| Adhesive |
About Durometer Hardness Scales
More
Ultra-High-Load Fastener-Mount Compression Springs
For the heaviest loads, these springs have more than double the load capacity of High-Load Fastener-Mount Compression Springs. Secure by inserting a fastener through the hole at the base. Springs are a polyester/rubber blend that is wear, oil, and fuel resistant.
Energy is calculated in one of two ways. For an object that is dropped, energy equals the weight of the item multiplied by distance dropped. For an object moving horizontally, energy equals half of the mass of the item multiplied by velocity squared (1/2 mv²).
For technical drawings and 3-D models, click on a part number.
| Lg. | OD | ID | Base Dia. | Compressed Lg. @ Max. Load | Compressed OD @ Max. Load | Max. Load, lbs. | Energy Capacity, in.-lbs. | Mounting Hole Dia. (A) | Mounting Fasteners Included | Material | Hardness | Temperature Range, °F | Each | |
| 0.438" | 0.47" | 0.23" | 0.41" | 0.24" | 0.6" | 200 | 20 | 0.14" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 00000 |
| 0.625" | 0.67" | 0.33" | 0.58" | 0.39" | 0.82" | 375 | 50 | 0.17" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 0000 |
| 0.75" | 0.79" | 0.4" | 0.7" | 0.39" | 1.01" | 550 | 90 | 0.21" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 0000 |
| 0.75" | 0.84" | 0.42" | 0.74" | 0.42" | 1.07" | 650 | 100 | 0.31" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 1" | 1.11" | 0.56" | 0.98" | 0.54" | 1.43" | 1,100 | 250 | 0.31" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 1.188" | 1.31" | 0.66" | 1.16" | 0.67" | 1.7" | 1,600 | 400 | 0.31" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 1.31" | 1.47" | 0.72" | 1.28" | 0.72" | 1.88" | 2,000 | 550 | 0.31" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 00000000 | 00000 |
| 1.375" | 1.55" | 0.8" | 1.35" | 0.73" | 1.97" | 2,000 | 700 | 0.42" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 1.49" | 1.7" | 0.79" | 1.48" | 0.85" | 2.15" | 2,800 | 900 | 0.42" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 00000000 | 00000 |
| 1.625" | 1.8" | 0.93" | 1.58" | 0.88" | 2.33" | 3,000 | 1,100 | 0.54" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 1.75" | 1.96" | 1.02" | 1.71" | 0.97" | 2.51" | 3,200 | 1,400 | 0.54" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 1.86" | 2.08" | 1.02" | 1.84" | 0.99" | 2.69" | 4,200 | 1,700 | 0.54" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 00000000 | 00000 |
| 2" | 2.25" | 1.16" | 1.97" | 1.1" | 2.86" | 4,000 | 2,000 | 0.54" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 2.125" | 2.38" | 1.23" | 2.1" | 1.19" | 3.05" | 5,000 | 2,500 | 0.54" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 2.25" | 2.54" | 1.28" | 2.23" | 1.25" | 3.22" | 6,000 | 3,000 | 0.54" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 2.38" | 2.7" | 1.35" | 2.35" | 1.32" | 3.4" | 6,400 | 3,500 | 0.54" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 00000000 | 00000 |
| 2.563" | 2.81" | 1.41" | 2.44" | 1.4" | 3.58" | 6,700 | 4,000 | 0.8" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 2.72" | 3.1" | 1.56" | 2.71" | 1.55" | 3.94" | 8,000 | 5,000 | 0.8" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 00000000 | 00000 |
| 2.91" | 3.22" | 1.65" | 2.82" | 1.6" | 4.12" | 9,000 | 6,000 | 0.8" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 00000000 | 00000 |
| 3" | 3.35" | 1.7" | 2.96" | 1.69" | 4.3" | 10,000 | 7,000 | 0.8" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 00000000 | 00000 |
| 3.15" | 3.5" | 1.75" | 3.11" | 1.73" | 4.48" | 11,000 | 8,000 | 0.8" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 00000000 | 00000 |
| 3.37" | 3.83" | 1.9" | 3.34" | 1.91" | 4.83" | 12,500 | 10,000 | 0.8" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 00000000 | 00000 |
| 3.98" | 4.56" | 2.24" | 3.93" | 2.2" | 5.73" | 19,000 | 17,000 | 0.8" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 00000000 | 000000 |
High-Load Fastener-Mount Compression Springs
These springs handle higher loads than standard fastener-mount compression springs. Secure by inserting a fastener through the hole at the base. Springs are a polyester/rubber blend that is wear, oil, and fuel resistant.
Energy is calculated in one of two ways. For an object that is dropped, energy equals the weight of the item multiplied by distance dropped. For an object moving horizontally, energy equals half of the mass of the item multiplied by velocity squared (1/2 mv²).
For technical drawings and 3-D models, click on a part number.
| Lg. | OD | ID | Base Dia. | Compressed Lg. @ Max. Load | Compressed OD @ Max. Load | Max. Load, lbs. | Energy Capacity, in.-lbs. | Mounting Hole Dia. (A) | Mounting Fasteners Included | Material | Hardness | Temperature Range, °F | Each | |
| 0.58" | 0.54" | 0.34" | 0.51" | 0.29" | 0.76" | 120 | 18 | 0.18" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 00000 |
| 0.73" | 0.68" | 0.42" | 0.64" | 0.4" | 0.96" | 180 | 33 | 0.21" | No | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 0000 |
| 0.815" | 0.79" | 0.48" | 0.73" | 0.42" | 1.08" | 180 | 50 | 0.31" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 1.09" | 1.02" | 0.63" | 0.97" | 0.57" | 1.45" | 300 | 100 | 0.31" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 1.27" | 1.24" | 0.77" | 1.16" | 0.65" | 1.72" | 400 | 200 | 0.31" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 1.42" | 1.38" | 0.84" | 1.28" | 0.72" | 1.9" | 600 | 250 | 0.31" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 1.48" | 1.44" | 0.82" | 1.35" | 0.76" | 1.99" | 700 | 300 | 0.31" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 1.63" | 1.6" | 0.93" | 1.48" | 0.85" | 2.17" | 900 | 400 | 0.54" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 1.75" | 1.66" | 0.98" | 1.58" | 0.88" | 2.35" | 900 | 550 | 0.54" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 1.91" | 1.85" | 1.08" | 1.73" | 0.97" | 2.53" | 1,100 | 700 | 0.54" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.03" | 1.9" | 1.12" | 1.83" | 1" | 2.71" | 1,400 | 800 | 0.54" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.18" | 2.11" | 1.24" | 1.97" | 1.06" | 2.89" | 1,600 | 1,000 | 0.54" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.33" | 2.2" | 1.3" | 2.09" | 1.19" | 3.07" | 1,700 | 1,200 | 0.54" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.45" | 2.34" | 1.39" | 2.21" | 1.25" | 3.25" | 1,800 | 1,400 | 0.54" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.58" | 2.53" | 1.46" | 2.33" | 1.32" | 3.43" | 2,300 | 1,700 | 0.54" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.71" | 2.57" | 1.51" | 2.44" | 1.4" | 3.61" | 2,300 | 2,000 | 0.8" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.96" | 2.9" | 1.7" | 2.71" | 1.55" | 3.97" | 3,500 | 2,500 | 0.8" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 3.11" | 3.05" | 1.82" | 2.82" | 1.63" | 4.15" | 3,700 | 3,000 | 0.8" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 3.31" | 3.2" | 1.86" | 2.95" | 1.69" | 4.33" | 4,000 | 3,500 | 0.8" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 3.36" | 3.29" | 1.97" | 3.07" | 1.65" | 4.52" | 4,000 | 4,000 | 0.8" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 3.66" | 3.55" | 2.14" | 3.32" | 1.78" | 4.88" | 4,000 | 5,000 | 0.8" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 4.31" | 4.22" | 2.56" | 3.95" | 2.1" | 5.78" | 5,000 | 8,000 | 0.8" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 000000 |
Fastener-Mount Compression Springs
Mount these springs on their side to absorb impact in a small amount of space. Differently sized screw holes on either side allow for mounting flexibility. Springs are a polyester/rubber blend that is wear, oil, and fuel resistant.
Energy is calculated based on the direction of your load. For an object that is dropped, energy equals the weight of the item multiplied by distance dropped. For an object moving horizontally, energy equals half of the mass of the item multiplied by velocity squared (1/2 mv²).
For technical drawings and 3-D models, click on a part number.
Mounting Hole Dia. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | OD | Wd. | Compressed Lg. @ Max. Load | Compressed OD @ Max. Load | Max. Load, lbs. | Energy Capacity, in.-lbs. | (A) | (B) | Mounting Fasteners Included | Material | Hardness | Temperature Range, °F | Each | |
| 0.91" | 1.18" | 0.52" | 0.32" | 1.51" | 125 | 20 | 0.22" | 0.37" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 1" | 1.12" | 0.52" | 0.32" | 1.51" | 50 | 10 | 0.22" | 0.38" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 0000 |
| 1.17" | 1.52" | 3/4" | 0.42" | 1.96" | 225 | 50 | 0.22" | 0.37" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 0000 |
| 1.25" | 1.44" | 0.76" | 0.41" | 1.96" | 75 | 20 | 0.22" | 0.38" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 0000 |
| 1.4" | 1.78" | 0.79" | 0.48" | 2.27" | 250 | 70 | 0.22" | 0.37" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 1.5" | 1.68" | 0.78" | 0.48" | 2.27" | 100 | 30 | 0.22" | 0.37" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 1.64" | 2.03" | 1.34" | 0.37" | 2.68" | 275 | 100 | 0.22" | 0.37" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 1.75" | 1.95" | 1.36" | 0.37" | 2.68" | 150 | 50 | 0.22" | 0.38" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.08" | 2.53" | 1.7" | 0.56" | 3.43" | 525 | 250 | 0.22" | 0.38" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.188" | 2.48" | 1.7" | 0.47" | 3.43" | 200 | 100 | 0.22" | 0.38" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.2" | 2.67" | 1.8" | 0.74" | 3.47" | 1,000 | 550 | 0.22" | 0.38" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.313" | 2.61" | 1.82" | 0.74" | 3.47" | 375 | 200 | 0.22" | 0.38" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.52" | 3.12" | 1.78" | 0.85" | 4.03" | 1,300 | 700 | 0.28" | 0.48" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.65" | 3" | 1.8" | 0.85" | 4.03" | 475 | 300 | 0.28" | 0.48" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.68" | 3.39" | 2.64" | 0.92" | 4.37" | 2,100 | 1,400 | 0.4" | 0.61" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.7" | 3.39" | 2" | 0.92" | 4.3" | 1,600 | 1,100 | 0.28" | 0.43" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.88" | 3.23" | 2.65" | 0.92" | 4.37" | 850 | 600 | 0.4" | 0.61" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 2.88" | 3.28" | 2" | 0.92" | 4.3" | 575 | 400 | 0.28" | 0.43" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 3" | 4.03" | 3.19" | 1.11" | 5.22" | 3,200 | 2,500 | 0.4" | 0.61" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 3.01" | 3.72" | 3.21" | 1.03" | 4.87" | 2,800 | 2,000 | 0.4" | 0.6" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 3.27" | 3.64" | 3 1/4" | 1.03" | 4.87" | 1,100 | 800 | 0.4" | 0.62" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
| 3.47" | 3.94" | 3.2" | 1.11" | 5.22" | 1,200 | 1,000 | 0.4" | 0.62" | No | Polyester/Rubber Blend | Durometer 40D | -40° to 120° | 0000000 | 00000 |
Flanged Compression Springs
Flanges on the ends of these springs provide a flat mounting surface. Springs are a polyester/rubber blend that is wear, oil, and fuel resistant.
As you squeeze a compression spring, it pushes back to return to its original length. Spring rate is the amount of force required for every inch of compression. The higher the spring rate, the harder it is to compress the spring.
For technical drawings and 3-D models, click on a part number.
Flange | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | OD | ID | OD | Thick. | Compressed Lg. @ Max. Load | Max. Load, lbs. | Spring Rate, lbs./in. | Material | Hardness | Temperature Range, °F | Each | |
| 0.625" | 0.74" | 0.5" | 0.95" | 0.1" | 0.39" | 40 | 114 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 000000 |
| 1.188" | 0.74" | 0.5" | 0.95" | 0.1" | 0.67" | 40 | 70 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 00000 |
| 1.25" | 1.5" | 1" | 1.9" | 0.2" | 0.76" | 200 | 277 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 00000 |
| 1.75" | 0.74" | 0.5" | 0.95" | 0.1" | 0.96" | 40 | 43 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 00000 |
| 1.875" | 2.25" | 1.5" | 2.86" | 0.3" | 1.16" | 500 | 485 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 00000 |
| 2.25" | 0.74" | 0.5" | 0.95" | 0.1" | 1.3" | 40 | 33 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 00000 |
| 2.375" | 1.5" | 1" | 1.9" | 0.2" | 1.3" | 200 | 147 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 00000 |
| 2.5" | 3.01" | 2" | 3.82" | 0.4" | 1.53" | 900 | 575 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 3.125" | 3.76" | 2.5" | 4.76" | 0.5" | 1.94" | 1,300 | 895 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 3.438" | 1.5" | 1" | 1.9" | 0.2" | 1.85" | 200 | 103 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 00000 |
| 3.5" | 2.25" | 1.5" | 2.86" | 0.3" | 1.97" | 500 | 245 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 3.75" | 4.5" | 3" | 5.69" | 0.61" | 2.3" | 1,700 | 910 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 4.5" | 1.5" | 1" | 1.9" | 0.2" | 2.4" | 200 | 92 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 000000 | 00000 |
| 4.625" | 3.01" | 2" | 3.82" | 0.4" | 2.65" | 900 | 335 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 5" | 2.25" | 1.5" | 2.86" | 0.3" | 2.72" | 500 | 165 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
| 5.75" | 3.76" | 2.5" | 4.76" | 0.5" | 3.44" | 1,300 | 410 | Polyester/Rubber Blend | Durometer 55D | -40° to 120° | 0000000 | 00000 |
Corrosion-Resistant Die Springs
A quieter, more vibration-resistant alternative to traditional steel die springs, these polyurethane springs resist oxidation, oil, and abrasion in high-load, high-pressure applications.
Deflection is the distance the spring compresses, expressed as a percentage of its length.
As you squeeze a die spring, it gets harder to push. Spring rate is the amount of force required for every inch of compression. The higher the spring rate, the harder it is to compress the spring.
For technical drawings and 3-D models, click on a part number.
| Lg. | Compressed Lg. @ Max. Load | Deflection @ Max. Load | Max. Load, lbs. | Spring Rate, lbs./in. | Material | Hardness | Temperature Range, °F | Each | |
For 11/16" Hole Dia. (For 3/16" Shaft Dia.) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1" | 0.85" | 15% | 470 | 1,880 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 00000 |
| 1.25" | 1.06" | 15% | 365 | 1,460 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
| 1.5" | 1.28" | 15% | 315 | 1,260 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
For 3/4" Hole Dia. (For 1/4" Shaft Dia.) | |||||||||
| 1" | 0.85" | 15% | 555 | 2,220 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
| 1.25" | 1.06" | 15% | 425 | 1,700 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
| 1.5" | 1.28" | 15% | 365 | 1,460 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
For 7/8" Hole Dia. (For 3/8" Shaft Dia.) | |||||||||
| 1" | 0.85" | 15% | 755 | 3,020 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
| 1.25" | 1.06" | 15% | 590 | 2,360 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
| 1.5" | 1.28" | 15% | 475 | 1,900 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
| 2" | 1.7" | 15% | 340 | 1,360 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
For 1" Hole Dia. (For 1/2" Shaft Dia.) | |||||||||
| 1" | 0.85" | 15% | 875 | 3,500 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
| 1.25" | 1.06" | 15% | 580 | 2,320 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
| 1.5" | 1.28" | 15% | 555 | 2,220 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
| 2" | 1.7" | 15% | 425 | 1,700 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
For 1 3/8" Hole Dia. (For 3/4" Shaft Dia.) | |||||||||
| 1.25" | 1.06" | 15% | 1,280 | 5,120 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
| 1.5" | 1.28" | 15% | 1,100 | 4,400 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
| 2" | 1.7" | 15% | 820 | 3,280 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
For 1 3/4" Hole Dia. (For 1" Shaft Dia.) | |||||||||
| 1.25" | 1.06" | 15% | 1,940 | 7,760 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
| 1.5" | 1.28" | 15% | 1,605 | 6,420 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
| 2" | 1.7" | 15% | 1,175 | 4,700 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 00000 |
| 2.5" | 2.13" | 15% | 935 | 3,740 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 00000 |
Bumpers for Tubing and Rods
With a split design, you can easily place these bumpers on tubing, rods, machinery legs, control shafts, and levers to protect them from impact, dents, and scratches. Use the concealed screw to secure them in place. Made of rubber, these bumpers resist abrasion. All have a hard rating to withstand high levels of impact. They're nonmarking and can be used outdoors.
For technical drawings and 3-D models, click on a part number.
For Outside | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | For OD | OD | Ht. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
For Round Tubing and Rods | ||||||||||||
Rubber | ||||||||||||
| __ | __ | 5/8" | 3" | 15/16" | -40° to 180° | Yes | Hard | Durometer 75A | Yes | Gray | 0000000 | 000000 |
| __ | __ | 3/4" | 3" | 15/16" | -40° to 180° | Yes | Hard | Durometer 75A | Yes | Gray | 0000000 | 00000 |
| __ | __ | 1" | 3" | 15/16" | -40° to 180° | Yes | Hard | Durometer 75A | Yes | Gray | 0000000 | 00000 |
| __ | __ | 1" | 5" | 1 3/16" | -40° to 180° | Yes | Hard | Durometer 75A | Yes | Gray | 0000000 | 00000 |
| __ | __ | 1 1/4" | 3" | 15/16" | -40° to 180° | Yes | Hard | Durometer 75A | Yes | Gray | 0000000 | 00000 |
| __ | __ | 1 1/4" | 5" | 1 3/16" | -40° to 180° | Yes | Hard | Durometer 75A | Yes | Gray | 0000000 | 00000 |
| __ | __ | 1 1/2" | 5" | 1 3/16" | -40° to 180° | Yes | Hard | Durometer 75A | Yes | Gray | 0000000 | 00000 |
For Square Tubing and Rods | ||||||||||||
Rubber | ||||||||||||
| 1" | 1" | __ | 3" | 15/16" | -40° to 180° | Yes | Hard | Durometer 75A | Yes | Gray | 0000000 | 00000 |
| 1" | 1" | __ | 5" | 1 3/16" | -40° to 180° | Yes | Hard | Durometer 75A | Yes | Gray | 0000000 | 00000 |
| 1 1/2" | 1 1/2" | __ | 5" | 1 3/16" | -40° to 180° | Yes | Hard | Durometer 75A | Yes | Gray | 0000000 | 00000 |
| 2" | 2" | __ | 5" | 1 3/16" | -40° to 180° | Yes | Hard | Durometer 75A | Yes | Gray | 0000000 | 00000 |
Wraparound Bumpers for Tubing and Rods
For quick and easy installation, wrap these bumpers around tubing, rods, machinery legs, control shafts, and levers to protect them from impact, dents, and scratches. They're also good for providing protection during shipment and storage. Made of plastic, these bumpers are chemical resistant and won't dry out and become brittle when exposed to UV rays. All have a hard rating to withstand high levels of impact.
For technical drawings and 3-D models, click on a part number.
| For OD | Lg. | Wd. | Thick. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Each | |
Vinyl Plastic | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1"-3" | 12 3/4" | 1" | 3/16" | Not Rated to 300° | No | Hard | Durometer 75A | No | Red | 0000000 | 000000 |
| 1"-4" | 16 1/4" | 1 1/2" | 3/16" | Not Rated to 300° | No | Hard | Durometer 75A | No | Red | 0000000 | 00000 |
| 1"-5 1/2" | 22" | 3" | 3/16" | Not Rated to 300° | No | Hard | Durometer 75A | No | Red | 0000000 | 00000 |
Pipe and Tubing Guards
Safeguard pipe, tubing, and other round equipment from damage. Black and yellow stripes create a visual alert to draw attention to equipment and obstructions. Designed to cushion during impact, these foam guards have a medium hardness rating to protect round surfaces. Made of polyurethane, they have good abrasion resistance. All of these guards are flexible so they can bend along a gradual curve. They have an adhesive backing, which allows for easy installation. They're nonmarking and can be used outdoors.
For technical drawings and 3-D models, click on a part number.
Hose Stops
Also known as bumper stops or ball stops, these two-piece hose stops prevent your hose from completely rewinding onto the reel. Position the stop anywhere along your hose and secure with the included screws.
For technical drawings and 3-D models, click on a part number.
For Hose | ||||||||
|---|---|---|---|---|---|---|---|---|
| ID | OD | ID | OD | Material | Screw Material | Choose a Color | Each | |
| 1/4" | 1/2" | 29/64" | 2 1/2" | Rubber | Stainless Steel | 0000000 | 000000 | |
| 3/8" | 21/32" | 39/64" | 2 1/2" | Rubber | Stainless Steel | 0000000 | 00000 | |
| 1/2" | 3/4" | 3/4" | 2 1/2" | Rubber | Stainless Steel | 0000000 | 00000 | |
| 3/4" | 1" | 1 1/8" | 3 1/2" | Rubber | Stainless Steel | 0000000 | 00000 | |
| 1" | 1 9/16" | 1 7/16" | 5" | Rubber | Stainless Steel | 0000000 | 00000 | |
| 1 1/4" | 1 13/16" | 1 11/16" | 5" | Rubber | Stainless Steel | 0000000 | 00000 | |
| 1 1/2" | 2 1/16" | 2" | 5" | Rubber | Stainless Steel | 0000000 | 00000 | |