This general purpose tubing is the industry standard for air and water applications.

A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.

This tubing won’t degrade when exposed to the damaging effects of UV light.

Multiple colors allow you to color-code your lines for easy identification.

Thick walls give this tubing excellent abrasion resistance.

Multiple colors allow you to color-code your line for easy identification.

This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.

Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.

Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.

This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.

Also known as air brake tubing, this tubing meets D.O.T. FMVSS 106 or D.O.T. FMVSS 49 specifications for testing and performance requirements in motor vehicle brake systems.

This resilient tubing won’t crack due to stress or impact.

Ultraviolet light won’t cause this tubing to degrade or deteriorate.

You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.

This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals.

Keep your work site safe and clutter free—this coiled tubing extends when you need it and retracts out of the way when you don't.

An FEP liner gives this tubing better chemical resistance than any of our other soft tubing. It also provides a smooth interior for unrestricted flow.

Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.

Cold temperatures pose no problems for this tubing—it stays strong and flexible, even when temperatures drop to -100° F.

An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.

Not only can this tubing handle the highest temperatures of all our soft tubing for food, beverage, and dairy, it also has superior abrasion and crush resistance. Use in applications up to 450° F.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

Silicone with a metal additive, this tubing routes liquids and ingredients as hot as 390° F through your food plant and is caught by metal detectors if a piece falls into your line.

Tough and durable, this tubing resists abrasion and tearing.

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.

The industry standard for fuel and lubricant applications, this tubing can be used intermittently with petroleum-based products without becoming hard or brittle.

This tubing is soft enough to handle continuous bending and flexing, yet tough enough to resist tearing and abrasion.

Not only is this tubing cured with platinum and free of plasticizers like DEHP, it can handle higher temperatures than any of our other high-purity tubing. Use in applications up to 450° F.

With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.

Tubing meets NSF/ANSI Standard 61 for drinking water.

Typically used with high-pressure brass and bronze threaded pipe fittings.

Attach barbed fittings to this hose for use in low-pressure air applications.

An extra-strong yarn reinforcement gives this hose excellent durability to handle high pressures.