McMaster-Carr logo
    Filter by
    End Fitting Material
    Body Style
    Clevis Pin Closure Method
    Wire Rope Diameter
    End Fitting Finish
    Safety Factor
    Industrial Info Snippet
    End Fitting Fabrication
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    239 Products

    Clevis-to-Clevis Turnbuckles—Not for Lifting

    Note: Capacities listed are for straight or in-line pull only.
    Forged Galvanized Steel Body with Forged Galvanized Steel Fittings
    Image of Attribute. Side1 orientation. ZoomedIn view. Contains Annotated. Clevis-to-Clevis Turnbuckles—Not for Lifting.
    Forged bodies and components are stronger than cast bodies and components.
    Galvanized steel has a thick coating for mild corrosion resistance.
    Turnbuckles
    Jam Nuts
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis Inside
    Wd.
    Thread
    Size
    Specs. Met
    Each
    Each
    5008 1/2"4"12 1/2"1/4"Cotter Pin3/8"1/4"-20
    ASTM F1145 Type 100000000000000000000000000
    8009 1/4"4 1/2"13 3/4"1/4"Cotter Pin15/32"5/16"-18
    ASTM F1145 Type 1000000000000000000000000
    1,20011 1/2"6"17 1/2"5/16"Cotter Pin1/2"3/8"-16
    ASTM F1145 Type 1000000000000000000000000
    2,20013 1/2"6"19 1/2"7/16"Cotter Pin5/8"1/2"-13
    ASTM F1145 Type 1000000000000000000000000
    2,20016 1/2"9"25 1/2"7/16"Cotter Pin5/8"1/2"-13
    ASTM F1145 Type 1000000000000000000000000
    2,20019 1/2"12"31 1/2"7/16"Cotter Pin5/8"1/2"-13
    ASTM F1145 Type 1000000000000000000000000
    3,50014 3/4"6"20 3/4"1/2"Cotter Pin7/8"5/8"-11
    ASTM F1145 Type 1000000000000000000000000
    3,50018 3/4"9"27 3/4"1/2"Cotter Pin7/8"5/8"-11
    ASTM F1145 Type 1000000000000000000000000
    3,50021 3/4"12"33 3/4"1/2"Cotter Pin7/8"5/8"-11
    ASTM F1145 Type 1000000000000000000000000
    5,20016 1/2"6"22 1/2"5/8"Cotter Pin15/16"3/4"-10
    ASTM F1145 Type 1000000000000000000000000
    5,20019 1/2"9"28 1/2"5/8"Cotter Pin15/16"3/4"-10
    ASTM F1145 Type 1000000000000000000000000
    5,20022 1/2"12"34 1/2"5/8"Cotter Pin15/16"3/4"-10
    ASTM F1145 Type 1000000000000000000000000
    5,20028 1/2"18"46 1/2"5/8"Cotter Pin15/16"3/4"-10
    ASTM F1145 Type 10000000000000000000000000
    7,20019 1/2"6"25 1/2"3/4"Cotter Pin1 5/32"7/8"-9
    ASTM F1145 Type 100000000000000000000000000
    7,20024 1/2"12"36 1/2"3/4"Cotter Pin1 5/32"7/8"-9
    ASTM F1145 Type 100000000000000000000000000
    7,20030 1/2"18"48 1/2"3/4"Cotter Pin1 5/32"7/8"-9
    ASTM F1145 Type 100000000000000000000000000
    10,00020 1/4"6"26 1/4"7/8"Cotter Pin1 3/16"1"-8
    ASTM F1145 Type 100000000000000000000000000
    10,00025 1/2"12"37 1/2"7/8"Cotter Pin1 3/16"1"-8
    ASTM F1145 Type 100000000000000000000000000
    10,00031 1/2"18"49 1/2"7/8"Cotter Pin1 3/16"1"-8
    ASTM F1145 Type 100000000000000000000000000
     
    Forged 316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Attribute. Side1 orientation. ZoomedIn view. Contains Annotated. Clevis-to-Clevis Turnbuckles—Not for Lifting.
    Forged bodies and components are stronger than cast bodies and components.
    316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
    Turnbuckles
    Right-Hand
    Jam Nuts
    Left-Hand
    Jam Nuts
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Specs. Met
    Each
    Each
    Each
    5007 3/4"4"11 3/4"1/4"Cotter Pin7/16"1/4"-20
    ASTM F1145 Type 1000000000000000000000000000000000000000
    8009"4 1/2"13 1/2"1/4"Cotter Pin1/2"5/16"-18
    ASTM F1145 Type 1000000000000000000000000000000000000
    1,20010 3/4"6"16 3/4"5/16"Cotter Pin9/16"3/8"-16
    ASTM F1145 Type 1000000000000000000000000000000000000
    2,20012"6"18"3/8"Cotter Pin5/8"1/2"-13
    ASTM F1145 Type 10000000000000000000000000000000000000
    3,50013 1/2"6"19 1/2"1/2"Cotter Pin3/4"5/8"-11
    ASTM F1145 Type 10000000000000000000000000000000000000
    5,20015"6"21"5/8"Cotter Pin1"3/4"-10
    ASTM F1145 Type 10000000000000000000000000000000000000
    8,00018"6"24"7/8"Cotter Pin1 1/4"1"-8
    ASTM F1145 Type 100000000000000000000000000000000000000
     
    Cast 316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Attribute. Side1 orientation. ZoomedIn view. Contains Annotated. Clevis-to-Clevis Turnbuckles—Not for Lifting.
    Image of Specification. With Cotter Ring. Front orientation. Cotter Ring Closure. Clevis-to-Clevis Turnbuckles—Not for Lifting.

    With Cotter Ring

    316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
    Turnbuckles
    Right-Hand
    Jam Nuts
    Left-Hand
    Jam Nuts
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Each
    Each
    Each
    3005 1/4"2 1/2"7 3/4"3/16"Cotter Ring5/16"10-24
    0000000000000000000000000000000000000000
    4006 1/4"3"9 1/4"1/4"Cotter Ring3/8"1/4"-20
    00000000000000000000000000000000000000
    8007 3/4"4"11 3/4"5/16"Cotter Ring3/8"5/16"-18
    00000000000000000000000000000000000000
    1,20010 3/4"6"16 3/4"3/8"Cotter Ring7/16"3/8"-16
    00000000000000000000000000000000000000
    2,20012"6"18"7/16"Cotter Ring9/16"1/2"-13
    00000000000000000000000000000000000000
    2,80015 3/4"8"23 3/4"5/8"Cotter Ring11/16"5/8"-11
    000000000000000000000000000000000000000
    3,50019 1/2"10"29 1/2"3/4"Cotter Ring7/8"3/4"-10
    000000000000000000000000000000000000000
     

    Clevis-to-Clevis Turnbuckles—For Lifting

    Made of galvanized steel, these turnbuckles have a thick coating for mild corrosion resistance.
    Note: Capacities listed are for vertical lift only.
    Forged Galvanized Steel Body with Forged Galvanized Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Clevis-to-Clevis Turnbuckles—For Lifting.
    Image of Attribute. Side1 orientation. ZoomedIn view. Contains Annotated. Clevis-to-Clevis Turnbuckles—For Lifting.
    Turnbuckles
    Jam Nuts
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis Inside
    Wd.
    Thread
    Size
    Specs. Met
    Each
    Each
    8009 1/4"4 1/2"13 3/4"1/4"Bolt15/32"5/16"-18
    ASME B30.26, ASTM F1145 Type 100000000000000000000000000
    1,20011 1/2"6"17 1/2"5/16"Bolt1/2"3/8"-16
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000
    2,20013 1/2"6"19 1/2"7/16"Bolt5/8"1/2"-13
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000
    2,20016 1/2"9"25 1/2"7/16"Bolt5/8"1/2"-13
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000
    2,20019 1/2"12"31 1/2"7/16"Bolt5/8"1/2"-13
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000
    3,50015 3/4"6"21 3/4"1/2"Bolt7/8"5/8"-11
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000
    3,50018 3/4"9"27 3/4"1/2"Bolt7/8"5/8"-11
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000
    3,50021 3/4"12"33 3/4"1/2"Bolt7/8"5/8"-11
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000
    5,20016 1/2"6"22 1/2"5/8"Cotter Pin15/16"3/4"-10
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000
    5,20019 1/2"9"28 1/2"5/8"Cotter Pin15/16"3/4"-10
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000
    5,20022 1/2"12"34 1/2"5/8"Cotter Pin15/16"3/4"-10
    ASME B30.26, ASTM F1145 Type 10000000000000000000000000
    5,20028 1/2"18"46 1/2"5/8"Cotter Pin15/16"3/4"-10
    ASME B30.26, ASTM F1145 Type 10000000000000000000000000
    10,00021 1/4"6"27 1/4"7/8"Cotter Pin1 11/32"1"-8
    ASME B30.26, ASTM F1145 Type 100000000000000000000000000
    10,00027 1/4"12"39 1/4"7/8"Cotter Pin1 11/32"1"-8
    ASME B30.26, ASTM F1145 Type 100000000000000000000000000
    10,00033 1/4"18"51 1/4"7/8"Cotter Pin1 11/32"1"-8
    ASME B30.26, ASTM F1145 Type 100000000000000000000000000
    10,00039 3/4"24"63 3/4"7/8"Cotter Pin1 11/32"1"-8
    ASME B30.26, ASTM F1145 Type 100000000000000000000000000
    15,20031 1/2"12"43 1/2"1 1/8"Cotter Pin1 27/32"1 1/4"-7
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000000
    15,20037 1/2"18"55 1/2"1 1/8"Cotter Pin1 27/32"1 1/4"-7
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000000
    15,20044 1/4"24"68 1/4"1 1/8"Cotter Pin1 27/32"1 1/4"-7
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000000
    21,40033 3/4"12"45 3/4"1 3/8"Cotter Pin2 1/16"1 1/2"-6
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000000
    21,40039 3/4"18"57 3/4"1 3/8"Cotter Pin2 1/16"1 1/2"-6
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000000
    21,40046 1/4"24"70 1/4"1 3/8"Cotter Pin2 1/16"1 1/2"-6
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000000
     

    Closed-Body Clevis-to-Clevis Turnbuckles—Not for Lifting

    The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have excellent corrosion resistance.
    Note: Capacities listed are for straight or in-line pull only.
    316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Closed-Body Clevis-to-Clevis Turnbuckles—Not for Lifting.
    Image of Attribute. Front orientation. Contains Annotated. Closed-Body Clevis-to-Clevis Turnbuckles—Not for Lifting.
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Features
    Each
    4005 7/8"2 3/8"8 1/4"3/16"Cotter Ring3/16"10-32
    Jam Nuts0000000000000
    1,0005 7/8"1 7/8"7 3/4"1/4"Cotter Ring1/4"1/4"-28
    Jam Nuts0000000000000
    1,0007 1/2"3 1/2"11"1/4"Cotter Ring1/4"1/4"-28
    Jam Nuts000000000000
    1,6008 5/8"3 3/4"12 3/8"5/16"Cotter Ring5/16"5/16"-24
    Jam Nuts000000000000
    2,8009 7/8"4 1/8"14"3/8"Cotter Ring3/8"3/8"-24
    Jam Nuts000000000000
    4,20012"4 1/2"16 1/2"1/2"Cotter Ring1/2"1/2"-20
    Jam Nuts, Bronze Pivot Insert0000000000000
    5,90015 1/4"5 1/4"20 1/2"5/8"Cotter Ring5/8"5/8"-18
    Jam Nuts, Bronze Pivot Insert0000000000000
     

    Clevis-to-Eye Turnbuckles—Not for Lifting

    Note: Capacities listed are for straight or in-line pull only.
    Forged Galvanized Steel Body with Galvanized Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Clevis-to-Eye Turnbuckles—Not for Lifting.
    Image of Attribute. Side1 orientation. ZoomedIn view. Contains Annotated. Clevis-to-Eye Turnbuckles—Not for Lifting.
    Image of Specification. Front orientation. Contains Annotated. Clevis-to-Eye Turnbuckles—Not for Lifting, Oval Eye.
    Image of Specification. Front orientation. Contains Annotated. Clevis-to-Eye Turnbuckles—Not for Lifting, Round Eye.
    Forged bodies and components are stronger than cast bodies and components.
    Galvanized steel has a thick coating for mild corrosion resistance.
    Oval Eye—Oval eyes provide more room to attach connectors.
    Turnbuckles
    Jam Nuts
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis Inside
    Wd.
    Eye
    Shape
    Eye ID
    Eye Inside
    Lg.
    Thread
    Size
    Specs. Met
    Each
    Each
    5008 1/4"4"12 1/4"1/4"Cotter Pin3/8"Round1/2"1/4"-20
    ASTM F1145 Type 100000000000000000000000000
    8009 1/4"4 1/2"13 3/4"1/4"Cotter Pin15/32"Round5/8"5/16"-18
    ASTM F1145 Type 1000000000000000000000000
    1,20011 1/2"6"17 1/2"5/16"Cotter Pin1/2"Round3/4"3/8"-16
    ASTM F1145 Type 1000000000000000000000000
    2,20013 1/4"6"19 1/4"7/16"Cotter Pin5/8"Round1"1/2"-13
    ASTM F1145 Type 1000000000000000000000000
    2,20016 1/4"9"25 1/4"7/16"Cotter Pin5/8"Round1"1/2"-13
    ASTM F1145 Type 1000000000000000000000000
    2,20019 1/4"12"31 1/4"7/16"Cotter Pin5/8"Round1"1/2"-13
    ASTM F1145 Type 1000000000000000000000000
    3,50014 3/4"6"20 3/4"1/2"Cotter Pin7/8"Round1 1/4"5/8"-11
    ASTM F1145 Type 1000000000000000000000000
    3,50018"9"27"1/2"Cotter Pin7/8"Round1 1/4"5/8"-11
    ASTM F1145 Type 1000000000000000000000000
    3,50021 1/4"12"33 1/4"1/2"Cotter Pin7/8"Round1 1/4"5/8"-11
    ASTM F1145 Type 1000000000000000000000000
    5,20015 3/4"6"21 3/4"5/8"Cotter Pin15/16"Round1 1/2"3/4"-10
    ASTM F1145 Type 1000000000000000000000000
    5,20018 3/4"9"27 3/4"5/8"Cotter Pin15/16"Round1 1/2"3/4"-10
    ASTM F1145 Type 1000000000000000000000000
    5,20022"12"34"5/8"Cotter Pin15/16"Round1 1/2"3/4"-10
    ASTM F1145 Type 1000000000000000000000000
    5,20028"18"46"5/8"Cotter Pin15/16"Round1 1/2"3/4"-10
    ASTM F1145 Type 10000000000000000000000000
    7,20019"6"25"3/4"Cotter Pin1 1/8"Round1 3/4"7/8"-9
    ASTM F1145 Type 10000000000000000000000000
    7,20023 1/2"12"35 1/2"3/4"Cotter Pin1 1/8"Round1 3/4"7/8"-9
    ASTM F1145 Type 100000000000000000000000000
    7,20030 9/16"18"50 5/16"3/4"Cotter Pin1 1/8"Oval1 1/4"2.38"7/8"-9
    ASTM F1145 Type 100000000000000000000000000
    10,00019 1/4"6"25 1/4"7/8"Cotter Pin1 3/16"Round2"1"-8
    ASTM F1145 Type 100000000000000000000000000
    10,00025 1/4"12"37 1/4"7/8"Cotter Pin1 3/16"Round2"1"-8
    ASTM F1145 Type 100000000000000000000000000
    10,00032 7/8"18"52 7/8"7/8"Cotter Pin1 3/16"Oval1 7/16"3"1"-8
    ASTM F1145 Type 100000000000000000000000000
     
    Forged 316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Clevis-to-Eye Turnbuckles—Not for Lifting.
    Image of Attribute. Side1 orientation. ZoomedIn view. Contains Annotated. Clevis-to-Eye Turnbuckles—Not for Lifting.
    Image of Specification. Front orientation. Contains Annotated. Clevis-to-Eye Turnbuckles—Not for Lifting, Oval Eye.
    Image of Specification. Front orientation. Contains Annotated. Clevis-to-Eye Turnbuckles—Not for Lifting, Round Eye.
    Forged bodies and components are stronger than cast bodies and components.
    316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
    Oval Eye—Oval eyes provide more room to attach connectors.
    Turnbuckles
    Right-Hand
    Jam Nuts
    Left-Hand
    Jam Nuts
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Eye
    Shape
    Eye
    ID
    Eye Inside
    Lg.
    Thread
    Size
    Specs. Met
    Each
    Each
    Each
    5008 1/2"4"12"1/4"Cotter Pin7/16"Oval5/16"3/4"1/4"-20
    ASTM F1145 Type 1000000000000000000000000000000000000000
    80010"4 1/2"13 3/4"1/4"Cotter Pin1/2"Oval7/16"15/16"5/16"-18
    ASTM F1145 Type 1000000000000000000000000000000000000
    1,20012"6"17"5/16"Cotter Pin9/16"Oval1/2"1 1/8"3/8"-16
    ASTM F1145 Type 1000000000000000000000000000000000000
    2,20013 3/4"6"18 1/2"3/8"Cotter Pin5/8"Oval3/4"1 7/16"1/2"-13
    ASTM F1145 Type 10000000000000000000000000000000000000
    3,50015 1/2"6"20"1/2"Cotter Pin3/4"Oval7/8"1 3/4"5/8"-11
    ASTM F1145 Type 10000000000000000000000000000000000000
    5,20017 1/2"6"21 3/4"5/8"Cotter Pin1"Oval1"2 1/16"3/4"-10
    ASTM F1145 Type 10000000000000000000000000000000000000
     
    Cast 316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Clevis-to-Eye Turnbuckles—Not for Lifting.
    Image of Attribute. Side1 orientation. ZoomedIn view. Contains Annotated. Clevis-to-Eye Turnbuckles—Not for Lifting.
    Image of Specification. Front orientation. Contains Annotated. Clevis-to-Eye Turnbuckles—Not for Lifting, Oval Eye.
    Image of Specification. Front orientation. Contains Annotated. Clevis-to-Eye Turnbuckles—Not for Lifting, Round Eye.
    316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
    Turnbuckles
    Right-Hand
    Jam Nuts
    Left-Hand
    Jam Nuts
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Eye
    Shape
    Eye
    ID
    Thread
    Size
    Each
    Each
    Each
    3005 1/2"2 1/2"8"3/16"Cotter Ring5/16"Round3/8"10-24
    0000000000000000000000000000000000000000
    4006 1/2"3"9 1/2"1/4"Cotter Ring3/8"Round7/16"1/4"-20
    00000000000000000000000000000000000000
    8007 3/4"4"12 1/4"5/16"Cotter Ring3/8"Round1/2"5/16"-18
    00000000000000000000000000000000000000
    1,20011"6"17 1/2"3/8"Cotter Ring7/16"Round5/8"3/8"-16
    00000000000000000000000000000000000000
    2,20012"6"18"7/16"Cotter Ring9/16"Round3/4"1/2"-13
    00000000000000000000000000000000000000
    2,80016 1/4"8"23 3/4"5/8"Cotter Ring11/16"Round7/8"5/8"-11
    000000000000000000000000000000000000000
    3,50019 1/4"10"29 1/2"3/4"Cotter Ring3/4"Round1 1/8"3/4"-10
    000000000000000000000000000000000000000
     

    Closed-Body Clevis-to-Wire Rope Turnbuckles—For Lifting

    Use these turnbuckles in lifting applications with wire rope. Their closed body not only protects threads from damage and debris, but also keeps these turnbuckles slim enough to fit in tight spaces.
    To install, fray the end of the wire rope with a marlin spike and screw the socket over the plug. You'll know the wire rope is secure if you see wire strands through the inspection hole on the turnbuckle body. Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
    Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
    Note: Capacities listed are for vertical lifting only.
    Steel Body with Steel Fittings
    Image of System. Front orientation. Exploded view. Contains Annotated. Turnbuckles. Closed-Body Clevis-to-Wire Rope Turnbuckles—For Lifting.
    Image of Product. Bottom orientation. Turnbuckles. Closed-Body Clevis-to-Wire Rope Turnbuckles—For Lifting.
    Clevis
    Pin
    For
    Wire Rope
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Dia.
    Construction
    Wire Rope
    Fitting Type
    Specs. Met
    Each
    906 5/16"2 1/2"8 13/16"3/16"Cotter Pin3/16"10-32
    1/16"6 × 7 Fiber Core
    6 × 19 IWRC
    6 × 19 Fiber Core
    6 × 26 IWRC
    6 × 37 IWRC
    7 × 7 Strand Core
    7 × 19 IWRC
    7 × 19 Strand Core
    Plug LockASME B30.260000000000000
    3407 11/16"2 7/8"10 9/16"1/4"Cotter Pin1/4"1/4"-28
    1/8"6 × 7 Fiber Core
    6 × 19 IWRC
    6 × 19 Fiber Core
    6 × 26 IWRC
    6 × 37 IWRC
    7 × 7 Strand Core
    7 × 19 IWRC
    7 × 19 Strand Core
    Plug LockASME B30.26000000000000
    7409 1/2"3 1/8"12 5/8"5/16"Cotter Pin5/16"3/8"-24
    3/16"6 × 7 Fiber Core
    6 × 19 IWRC
    6 × 19 Fiber Core
    6 × 26 IWRC
    6 × 37 IWRC
    7 × 7 Strand Core
    7 × 19 IWRC
    7 × 19 Strand Core
    Plug LockASME B30.260000000000000
    1,36010 15/16"4 13/16"15 3/4"3/8"Cotter Pin3/8"1/2"-20
    1/4"6 × 7 Fiber Core
    6 × 19 IWRC
    6 × 19 Fiber Core
    6 × 26 IWRC
    6 × 37 IWRC
    7 × 7 Strand Core
    7 × 19 IWRC
    7 × 19 Strand Core
    Plug LockASME B30.260000000000000
     
    Zinc-Plated Steel Body with Steel Fittings
    Image of System. Front orientation. Exploded view. Contains Annotated. Turnbuckles. Closed-Body Clevis-to-Wire Rope Turnbuckles—For Lifting.
    Image of Product. Bottom orientation. Turnbuckles. Closed-Body Clevis-to-Wire Rope Turnbuckles—For Lifting.
    Zinc-plated steel is mildly corrosion resistant.
    Clevis
    Pin
    For
    Wire Rope
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Dia.
    Construction
    Wire Rope
    Fitting Type
    Specs. Met
    Each
    7409 1/2"3 1/8"12 5/8"5/16"Cotter Pin5/16"3/8"-24
    3/16"6 × 7 Fiber Core
    6 × 19 IWRC
    6 × 19 Fiber Core
    6 × 26 IWRC
    6 × 37 IWRC
    7 × 7 Strand Core
    7 × 19 IWRC
    7 × 19 Strand Core
    Plug LockASME B30.2600000000000000
    3,02013 1/4"5 5/16"18 9/16"1/2"Cotter Pin7/16"3/4"-16
    3/8"6 × 7 Fiber Core
    6 × 19 IWRC
    6 × 19 Fiber Core
    6 × 26 IWRC
    6 × 37 IWRC
    7 × 7 Strand Core
    7 × 19 IWRC
    7 × 19 Strand Core
    Plug LockASME B30.260000000000000
     
    316 Stainless Steel Body with Steel Fittings
    Image of System. Front orientation. Exploded view. Contains Annotated. Turnbuckles. Closed-Body Clevis-to-Wire Rope Turnbuckles—For Lifting.
    Image of Product. Bottom orientation. Turnbuckles. Closed-Body Clevis-to-Wire Rope Turnbuckles—For Lifting.
    316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
    Clevis
    Pin
    For
    Wire Rope
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Dia.
    Construction
    Wire Rope
    Fitting Type
    Specs. Met
    Each
    7409 1/2"3 1/8"12 5/8"5/16"Cotter Pin5/16"3/8"-24
    3/16"6 × 7 Fiber Core
    6 × 19 IWRC
    6 × 19 Fiber Core
    6 × 26 IWRC
    6 × 37 IWRC
    7 × 7 Strand Core
    7 × 19 IWRC
    7 × 19 Strand Core
    Plug LockASME B30.2600000000000000
    1,36010 15/16"4 13/16"15 3/4"3/8"Cotter Pin3/8"1/2"-20
    1/4"6 × 7 Fiber Core
    6 × 19 IWRC
    6 × 19 Fiber Core
    6 × 26 IWRC
    6 × 37 IWRC
    7 × 7 Strand Core
    7 × 19 IWRC
    7 × 19 Strand Core
    Plug LockASME B30.260000000000000
     

    Clevis End Fittings for Turnbuckles—Not for Lifting

    Image of Attribute. Side1 orientation. ZoomedIn view. Contains Annotated. Turnbuckles. Clevis End Fittings for Turnbuckles—Not for Lifting.
    Forged Galvanized Steel
    Image of Product. Front orientation. Turnbuckles. Clevis End Fittings for Turnbuckles—Not for Lifting, Galvanized Steel End Fitting, Cotter Pin Closure.

    Cotter Pin Closure

    Forged fittings are stronger than cast and wire drawn fittings.
    Galvanized steel fittings have a thick coating for mild corrosion resistance.
    Clevis
    Pin
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Dia.
    Closure
    Method
    Clevis Inside
    Wd.
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    7,2003/4"Cotter Pin1 3/16"7/8"-9
    9"12 11/16"0000000000000000000000000000
    Not Rated1/4"Cotter Pin3/8"1/4"-20
    2 3/4"4 3/8"000000000000000000000000
    Not Rated1/4"Cotter Pin15/32"5/16"-18
    3"4 15/16"00000000000000000000000000
    Not Rated5/16"Cotter Pin1/2"3/8"-16
    3 11/16"5 3/4"00000000000000000000000000
    Not Rated7/16"Cotter Pin5/8"1/2"-13
    3 15/16"6 3/4"00000000000000000000000000
    Not Rated7/16"Cotter Pin5/8"1/2"-13
    5 5/8"8 1/4"00000000000000000000000000
    Not Rated7/16"Cotter Pin5/8"1/2"-13
    7 1/8"9 3/4"00000000000000000000000000
    Not Rated1/2"Cotter Pin7/8"5/8"-11
    4 5/16"7 1/2"00000000000000000000000000
    Not Rated1/2"Cotter Pin7/8"5/8"-11
    5 7/8"9"00000000000000000000000000
    Not Rated1/2"Cotter Pin7/8"5/8"-11
    7 1/4"11"00000000000000000000000000
    Not Rated5/8"Cotter Pin15/16"3/4"-10
    4 3/8"8"00000000000000000000000000
    Not Rated5/8"Cotter Pin15/16"3/4"-10
    5 5/8"9 3/8"00000000000000000000000000
    Not Rated5/8"Cotter Pin15/16"3/4"-10
    7 1/2"11 1/2"00000000000000000000000000
    Not Rated5/8"Cotter Pin15/16"3/4"-10
    10 1/2"14 3/8"00000000000000000000000000
    Not Rated3/4"Cotter Pin1 1/8"7/8"-9
    5 1/2"9 1/2"00000000000000000000000000
    Not Rated7/8"Cotter Pin1 3/16"1"-8
    5 1/2"10 1/4"00000000000000000000000000
    Not Rated7/8"Cotter Pin1 5/16"1"-8
    8 1/2"12 13/16"00000000000000000000000000
     
    Forged 18-8 Stainless Steel
    Image of Product. Front orientation. Turnbuckles. Clevis End Fittings for Turnbuckles—Not for Lifting, Cotter Ring Closure.

    Cotter Ring

    Closure

    Forged fittings are stronger than cast and wire drawn fittings.
    18-8 stainless steel fittings have good corrosion resistance.
    Clevis
    Pin
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    4003/16"Cotter Ring3/16"10-32
    1 3/16"3 1/16"0000000000000000000000000000
    1,0001/4"Cotter Ring1/4"1/4"-28
    2 1/2"4 1/16"00000000000000000000000000
    1,6005/16"Cotter Ring5/16"5/16"-24
    2 9/16"4 1/2"00000000000000000000000000
    2,8003/8"Cotter Ring3/8"3/8"-24
    2 15/16"5 3/8"00000000000000000000000000
    4,2001/2"Cotter Ring1/2"1/2"-20
    3 1/2"6 3/8"0000000000000000000000000000
    5,9005/8"Cotter Ring5/8"5/8"-18
    4 5/16"7 5/8"0000000000000000000000000000
     
    Forged 316 Stainless Steel
    Image of Product. Bolt and Cotter Pin Closure. Front orientation. Bolt Closure. Clevis End Fittings for Turnbuckles—Not for Lifting.

    Bolt and Cotter

    Pin Closure

    Forged fittings are stronger than cast and wire drawn fittings.
    316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
    Clevis Pin
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Dia.
    Closure Method
    Clevis
    Inside Wd.
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    5001/4"Bolt, Cotter Pin7/16"1/4"-20
    2 5/8"4 1/4"0000000000000000000000000000
    8001/4"Bolt, Cotter Pin1/2"5/16"-18
    2 7/8"5"00000000000000000000000000
    1,2005/16"Bolt, Cotter Pin9/16"3/8"-16
    3 15/16"5 7/8"00000000000000000000000000
    2,2003/8"Bolt, Cotter Pin5/8"1/2"-13
    4 1/8"6 9/16"00000000000000000000000000
    3,5001/2"Bolt, Cotter Pin3/4"5/8"-11
    4 3/8"7 9/16"00000000000000000000000000
    5,2005/8"Bolt, Cotter Pin1"3/4"-10
    4 5/8"8 3/8"00000000000000000000000000
    8,0007/8"Bolt, Cotter Pin1 1/4"1"-8
    4 13/16"10 3/16"0000000000000000000000000000
     
    Cast 316 Stainless Steel
    Image of Product. Front orientation. Turnbuckles. Clevis End Fittings for Turnbuckles—Not for Lifting, Cotter Ring Closure.

    Cotter Ring

    Closure

    316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
    Clevis
    Pin
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    3003/16"Cotter Ring3/8"10-24
    1 11/16"2 5/8"0000000000000000000000000000
    4401/4"Cotter Ring7/16"1/4"-20
    2 1/8"3 1/8"00000000000000000000000000
    8005/16"Cotter Ring7/16"5/16"-18
    2 11/16"3 13/16"0000000000000000000000000000
    1,2003/8"Cotter Ring9/16"3/8"-16
    3 7/8"5 3/8"0000000000000000000000000000
    2,2007/16"Cotter Ring11/16"1/2"-13
    4 1/8"6"0000000000000000000000000000
    2,8005/8"Cotter Ring3/4"5/8"-11
    5 5/16"8 1/8"———000000000000000
    2,8005/8"Cotter Ring3/4"5/8"-11
    5 5/16"8 3/16"00000000000000———0
    3,5003/4"Cotter Ring7/8"3/4"-10
    6 9/16"10"0000000000000000000000000000
     

    Clevis-to-Eye Turnbuckles—For Lifting

    Made of galvanized steel, these turnbuckles have a thick coating for mild corrosion resistance.
    Note: Capacities listed are for vertical lifting only.
    Forged Galvanized Steel Body with Galvanized Steel Fittings
    Image of Product. Side1 orientation. Turnbuckles. Clevis-to-Eye Turnbuckles—For Lifting.
    Image of Attribute. Side1 orientation. ZoomedIn view. Contains Annotated. Clevis-to-Eye Turnbuckles—For Lifting.
    Image of Specification. Front orientation. Contains Annotated. Clevis-to-Eye Turnbuckles—For Lifting, Oval Eye.
    Turnbuckles
    Jam Nuts
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis Inside
    Wd.
    Eye
    Shape
    Eye ID
    Thread
    Size
    Specs. Met
    Each
    Each
    8009 3/4"4 1/2"14 1/4"1/4"Bolt1/2"Oval7/16"5/16"-18
    ASME B30.26, ASTM F1145 Type 100000000000000000000000000
    1,20011 3/4"6"17 3/4"5/16"Bolt17/32"Oval1/2"3/8"-16
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000
    2,20014 1/2"6"20 1/2"3/8"Bolt5/8"Oval11/16"1/2"-13
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000
    2,20017 3/4"9"26 3/4"3/8"Bolt5/8"Oval11/16"1/2"-13
    ASME B30.26, ASTM F1145 Type 10000000000000000000000000
    2,20020 3/4"12"32 3/4"3/8"Bolt5/8"Oval11/16"1/2"-13
    ASME B30.26, ASTM F1145 Type 10000000000000000000000000
    3,50016 1/4"6"22 1/4"1/2"Bolt25/32"Oval7/8"5/8"-11
    ASME B30.26, ASTM F1145 Type 10000000000000000000000000
    3,50019 1/2"9"28 1/2"1/2"Bolt25/32"Oval7/8"5/8"-11
    ASME B30.26, ASTM F1145 Type 10000000000000000000000000
    3,50022 1/2"12"34 1/2"1/2"Bolt25/32"Oval7/8"5/8"-11
    ASME B30.26, ASTM F1145 Type 10000000000000000000000000
    5,20018"6"24"5/8"Cotter Pin31/32"Oval1"3/4"-10
    ASME B30.26, ASTM F1145 Type 10000000000000000000000000
    5,20021 1/2"9"30 1/2"5/8"Cotter Pin31/32"Oval1"3/4"-10
    ASME B30.26, ASTM F1145 Type 10000000000000000000000000
    5,20024 1/2"12"36 1/2"5/8"Cotter Pin31/32"Oval1"3/4"-10
    ASME B30.26, ASTM F1145 Type 10000000000000000000000000
    5,20030 1/2"18"48 1/2"5/8"Cotter Pin31/32"Oval1"3/4"-10
    ASME B30.26, ASTM F1145 Type 10000000000000000000000000
    10,00021 1/2"6"27 1/2"7/8"Cotter Pin1 11/32"Oval1 7/16"1"-8
    ASME B30.26, ASTM F1145 Type 100000000000000000000000000
    10,00027 1/2"12"39 1/2"7/8"Cotter Pin1 11/32"Oval1 7/16"1"-8
    ASME B30.26, ASTM F1145 Type 100000000000000000000000000
    10,00033 1/2"18"51 1/2"7/8"Cotter Pin1 11/32"Oval1 7/16"1"-8
    ASME B30.26, ASTM F1145 Type 100000000000000000000000000
    10,00040 1/4"24"64 1/4"7/8"Cotter Pin1 11/32"Oval1 7/16"1"-8
    ASME B30.26, ASTM F1145 Type 100000000000000000000000000
    15,20032"12"44"1 1/8"Cotter Pin1 27/32"Oval1 13/16"1 1/4"-7
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000000
    15,20038"18"56"1 1/8"Cotter Pin1 27/32"Oval1 13/16"1 1/4"-7
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000000
    15,20044 1/2"24"68 1/2"1 1/8"Cotter Pin1 27/32"Oval1 13/16"1 1/4"-7
    ASME B30.26, ASTM F1145 Type 1000000000000000000000000000
     

    Closed-Body Clevis-to-Eye Turnbuckles—Not for Lifting

    The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have good corrosion resistance.
    Note: Capacities listed are for straight or in-line pull only.
    316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Closed-Body Clevis-to-Eye Turnbuckles—Not for Lifting.
    Image of Attribute. Front orientation. Contains Annotated. Closed-Body Clevis-to-Eye Turnbuckles—Not for Lifting.
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Eye
    Shape
    Eye
    ID
    Thread
    Size
    Features
    Each
    4005 7/8"2 3/8"8 1/4"3/16"Cotter Ring3/16"Round5/16"10-32
    Jam Nuts0000000000000
    1,0007 1/2"3 3/8"10 7/8"1/4"Cotter Ring1/4"Round3/8"1/4"-28
    Jam Nuts000000000000
    1,6008 1/2"4"12 1/2"5/16"Cotter Ring5/16"Round1/2"5/16"-24
    Jam Nuts000000000000
    2,8009 3/4"4 1/4"14"3/8"Cotter Ring3/8"Round5/8"3/8"-24
    Jam Nuts000000000000
    4,20012"3 3/4"15 3/4"1/2"Cotter Ring1/2"Round3/4"1/2"-20
    Jam Nuts, Bronze Pivot Insert0000000000000
    5,90015"5"20"5/8"Cotter Ring5/8"Round7/8"5/8"-18
    Jam Nuts, Bronze Pivot Insert0000000000000
     

    Hook-to-Clevis Turnbuckles—Not for Lifting

    The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces. Made of 316 stainless steel, these turnbuckles have good corrosion resistance.
    Note: Capacities listed are for straight or in-line pull only.
    316 Stainless Steel Body with 316 Stainless Steel Fittings
    Image of Product. Front orientation. Turnbuckles. Hook-to-Clevis Turnbuckles—Not for Lifting.
    Image of Attribute. Front orientation. Contains Annotated. Hook-to-Clevis Turnbuckles—Not for Lifting.
    Image of Attribute. Front orientation. Contains Annotated.
    Clevis
    Pin
    Wt. Cap.,
    lb.
    Retracted
    Lg.
    Max.
    Adjustment
    Extended
    Lg.
    Hook Opening
    Wd.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Features
    Each
    805 3/4"2 1/4"8"1/4"3/16"Cotter Ring3/16"10-32
    Jam Nuts0000000000000
    1007 1/2"3 1/2"11"3/8"1/4"Cotter Ring1/4"1/4"-28
    Jam Nuts000000000000
    2008 3/8"4 1/4"12 5/8"1/2"5/16"Cotter Ring5/16"5/16"-24
    Jam Nuts000000000000
    4009 9/16"4 7/16"14"5/8"3/8"Cotter Ring3/8"3/8"-24
    Jam Nuts000000000000
    70012"4 3/4"16 3/4"3/4"1/2"Cotter Ring1/2"1/2"-20
    Jam Nuts, Bronze Pivot Insert0000000000000
    1,20015"5 3/4"20 3/4"7/8"5/8"Cotter Ring5/8"5/8"-18
    Jam Nuts, Bronze Pivot Insert0000000000000
     

    Clevis End Fittings for Turnbuckles—For Lifting

    Made of galvanized steel, these fittings have a thick coating for mild corrosion resistance.
    Forged Galvanized Steel
    Image of Product. Front orientation. Turnbuckles. Clevis End Fittings for Turnbuckles—For Lifting.
    Image of Attribute. Side1 orientation. ZoomedIn view. Contains Annotated. Turnbuckles. Clevis End Fittings for Turnbuckles—For Lifting.
    Clevis
    Pin
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Specs. Met
    Each
    Each
    15,2001 1/8"Cotter Pin1 3/4"1 1/4"-7
    8 3/8"15 3/4"ASME B30.26000000000000000000000000000000
    15,2001 1/8"Cotter Pin1 3/4"1 1/4"-7
    11 3/8"18 13/16"ASME B30.260000000000000000000000000000
    15,2001 1/8"Cotter Pin1 3/4"1 1/4"-7
    14 3/8"21 13/16"ASME B30.260000000000000000000000000000
     
    back to top