Filter by
DFARS Compliance
About Hinges
More
Mortise-Mount Two-Way Swinging Door Hinges
Hinge
Replacement Tension Pin
The hinge leaves fit in cutouts (mortises) on the edge of a door. Open a door or gate in either direction and these hinges pull it closed. Use the included tension adjustment tool to adjust the closing tension.
Brass-, and chrome-plated steel hinges are more corrosion resistant than primed steel.
For technical drawings and 3-D models, click on a part number.
Hinges | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Door Leaf | Frame Leaf | Replacement Tension Pins | |||||||||||||
| For Min. Door Ht. | For Max. Door Wd. | For Door Thick. | Ht. | Wd. | Ht. | Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Material | Mounting Fasteners Included | Each | Each | ||
Primed Steel | |||||||||||||||
| 60" | 32" | 3/4"-1" | 3" | 1 5/8" | 2 3/4" | 1 1/2" | 0.080" | 180° | 35 | Steel | Yes | 00000000 | 000000 | 00000000 | 00000 |
| 80" | 36" | 7/8"-1 1/4" | 4" | 1 5/8" | 3 3/4" | 1 1/2" | 0.080" | 180° | 75 | Steel | Yes | 00000000 | 00000 | 00000000 | 0000 |
| 80" | 36" | 1 1/8"-1 1/2" | 5" | 2" | 4 19/32" | 1 15/16" | 0.090" | 180° | 90 | Steel | Yes | 00000000 | 00000 | 00000000 | 0000 |
| 84" | 36" | 1 1/4"-1 3/4" | 6" | 2 1/8" | 5 9/16" | 2 1/4" | 0.110" | 180° | 100 | Steel | Yes | 00000000 | 00000 | 00000000 | 0000 |
Brass-Plated Steel—Dull | |||||||||||||||
| 60" | 32" | 3/4"-1" | 3" | 1 5/8" | 2 3/4" | 1 1/2" | 0.080" | 180° | 35 | Steel | Yes | 00000000 | 00000 | 00000000 | 0000 |
| 80" | 36" | 7/8"-1 1/4" | 4" | 1 5/8" | 3 3/4" | 1 1/2" | 0.080" | 180° | 75 | Steel | Yes | 00000000 | 00000 | 00000000 | 0000 |
| 80" | 36" | 1 1/8"-1 1/2" | 5" | 2" | 4 19/32" | 1 15/16" | 0.090" | 180° | 90 | Steel | Yes | 00000000 | 00000 | 00000000 | 0000 |
| 84" | 36" | 1 1/4"-1 3/4" | 6" | 2 1/8" | 5 9/16" | 2 1/4" | 0.110" | 180° | 100 | Steel | Yes | 00000000 | 00000 | 00000000 | 0000 |
Chrome-Plated Steel—Dull | |||||||||||||||
| 60" | 32" | 3/4"-1" | 3" | 1 5/8" | 2 3/4" | 1 1/2" | 0.080" | 180° | 35 | Steel | Yes | 00000000 | 00000 | 00000000 | 0000 |
| 80" | 36" | 7/8"-1 1/4" | 4" | 1 5/8" | 3 3/4" | 1 1/2" | 0.080" | 180° | 75 | Steel | Yes | 00000000 | 00000 | 00000000 | 0000 |
| 80" | 36" | 1 1/8"-1 1/2" | 5" | 2" | 4 19/32" | 1 15/16" | 0.090" | 180° | 90 | Steel | Yes | 00000000 | 00000 | 00000000 | 0000 |
| 84" | 36" | 1 1/4"-1 3/4" | 6" | 2 1/8" | 5 9/16" | 2 1/4" | 0.110" | 180° | 100 | Steel | Yes | 00000000 | 00000 | 00000000 | 0000 |
T-Slotted Framing Hinges
Use hinges to add doors, lids, and machine guards to T-slotted framing.
For technical drawings and 3-D models, click on a part number.
Rail-to-Rail Two-Way Hinges
Rail-to-Rail Two-Way Hinge
Rail-to-rail hinges provide smooth motion at the junction between two rails.
Two-way hinges open doors and gates in both directions, and also pull them closed. Use the included tension adjustment tool to change how quickly they close.
| For Rail Ht. | Material | Lg. | Ht. | Range of Motion | Closing Tension | Mounting Fasteners Included | Includes | Each | |
Reversible | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 1/2", 40mm | 201 Stainless Steel | 5 1/2" | 4 1/16" | 350° | Adjustable | Yes | Tension Adjustment Tool | 0000000 | 000000 |