This light has two UV bulbs and two fluorescent bulbs that work independently of each other. The combination of UV light and magnifying lens lets you see the smallest traces of fluorescence while inspecting. This light cannot be sold to Canada due to local regulations on mercurcy content.

Cover large areas with this long lamp. Use for UV curing as well as leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulations on mercury content.

Designed for UV curing of small areas, these lamps also aid in leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulatory limits on mercury content.

Set the lamp on a bench top and the 360° rotating head directs light where you need it. It cannot be sold to Canada due to local regulatory limits on mercury content.

An optional lens filter (sold separately) lets you see extra-fine particles by reducing glare and the output of visible light.

Use these lamps for UV curing as well as leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulatory limits on mercury content.

Use these chambers to dry coatings, inks, paints, and light-activated adhesives, or strengthen and finish 3D-printed parts made of liquid resin. With a light intensity five times greater than our bench-top ultraviolet lamp, these chambers work five times as quickly, cutting down curing time to seconds or minutes. The greater intensity also creates a deeper cure in your part. Light reflects off the chamber walls to give your piece a more consistent cure throughout, as well. The aluminum housing protects you by containing UV rays, and an automatic lamp shutter blocks light even when the door is open. Still, users should always wear UV-protective glasses and clothing when the system is turned on.

Setup is simple: Place the lamp on top of the housing, plug it into an electrical outlet, and the unit is ready to cure. The lamp’s light intensity is adjustable, so you can turn it down to avoid damaging sensitive material. An adjustable shelf accommodates items small to large. A timer ensures that the lamp won’t stay on for too long, leaving you free to do other tasks. With a handle on top, these chambers can be moved easily around your facility.

To remotely control and monitor, connect to PLCs using the 15-pin D-sub connector. Cord included.

Chambers and replacement bulbs cannot be sold to Canada due to regulations limiting mercury content.

For technical drawings and 3-D models, click on a part number.

Disinfect objects, surfaces, or entire rooms—these lamps kill viruses, bacteria, and other microbes with ultraviolet germicidal irradiation (UVGI). They’re commonly used in areas that could be damaged by liquid cleaners or chemical disinfectants. Always wear eye and skin protection when operating. Since these lamps don’t produce ozone, it’s safe to enter the disinfected area as soon as they’re turned off.

Ceiling- and wall-mount lamps have mounting holes for installation. Use them to disinfect small objects such as face masks, respirators, and lab tools, and small surfaces such as countertops. For best results, replace the bulbs after 1,000 hours of use. With an optional stand, place lamps with 15W bulbs on a work surface to quickly disinfect multiple objects at close range. The stand has an adjustable height, which lets you increase or decrease the intensity of exposure for different applications.

Freestanding lamps emit light in all directions for 360° disinfection. They’re often used in large spaces such as industrial sites and commercial facilities. Set the timer for how long you want them to run, and then leave the room—they’ll wait 90 seconds before turning on. A digital display tells you how much time remains. These lamps have motion sensors to automatically turn off if someone enters the room during disinfection. Once they haven’t detected motion for 30 seconds, they’ll turn on again. For best results, replace the bulbs after 8,000 hours of use.

Lamps with a 55W bulb emit enough UV light to disinfect 225 sq. ft. They have nonskid feet for stability.

Lamps with eight 20W bulbs emit enough UV light to disinfect 1,000 sq. ft. Locking casters let you move them from room to room without having to lift them.

Lamps that cannot be sold to Canada are restricted due to import regulations.

For technical drawings and 3-D models, click on a part number.

Disinfect phones, door knobs, masks, and other small objects. Using ultraviolet germicidal irradiation (UVGI), these portable lamps kill viruses, bacteria, and other microbes in seconds. Lightweight with a durable plastic housing, they’re designed to be carried from place to place. To guard from UV rays, wear eye protection and cover exposed skin while disinfecting.

Lamps that cannot be sold to Canada are restricted due to import regulations.

For technical drawings and 3-D models, click on a part number.