A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.

Don’t worry about crushing this hose if you step on it—it has a flexible plastic spiral that springs back to its original shape.

Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.

Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.

SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.

The strongest nonmetal duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.

A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.

The smooth interior prevents dust from getting trapped and building up inside the hose.

Hose has a flexible plastic spiral that bounces back to its original shape when stepped on.

This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.

A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).

The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.

Unlike other duct hose that has a metal spiral, this hose has a plastic spiral that will not rust.

A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.

Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.

Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.

Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.

If you’re tight on storage space, this hose compresses down to a small size.

Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures.

Step on or drive over this hose without causing damage.

A smooth interior allows for unrestricted flow and makes this hose easy to clean.

Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.

The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.

Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.

Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.

An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.

Made of PVC, this hose is economical yet durable enough to handle vacuum up to 28 Hg.

Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.

Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.

The PVC construction means this hose won’t impart tastes or odors on your product. Use with juice, milk, meat, poultry, and syrup.

The super-smooth interior of this hose prevents product buildup. Use hose with juice, milk, and syrup.

A tough EPDM rubber cover protects the hose from damage. Use hose with juice, meat, milk, poultry, and syrup.

Hose is clear PVC so you can easily monitor flow. Use it with flour, grain, rice, and sugar.

Not only can this hose withstand high temperatures, it won't collapse in low-vacuum applications. It's also known as radiator hose.

Connect to high-vacuum pumps to route exhaust fumes out of your work area. Also known as roughing hose.

Made of thick, rigid nylon, this hose has excellent durability and the highest pressure rating of the retracting hose we offer.

Use this neoprene hose in temperatures up to 210° F.

Step on this hose and it springs back to its original shape.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

Attach push-on barbed fittings to this hose for use in low-pressure hydraulic applications. No clamps are needed to secure fittings to the hose; the more you pull on the fittings, the tighter the hose will grip.

Made of nylon, this hose is lighter and easier to maneuver than rubber hydraulic hose.

Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system.

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.

The fittings are a short length of tubing that inserts into the end of another tube fitting.

Also known as an instrumentation fittings, the Yor-Lok fitting has two sleeves (double ferrules) that bite into metal tubing for a strong seal. The tube stem fitting is a short length of tubing that inserts into the end of another tube fitting.