For Use With For Use With |
|---|
Housing Material Housing Material |
|---|
|
|
Connection Style Connection Style |
|---|
 |
| Threaded |
 |
| Quick Clamp |
 |
| Claw Clamp |
Maximum Flow Rate Maximum Flow Rate |
|---|
Element Material Element Material |
|---|
|
Overall Height Overall Height |
|---|
|
|
|
Maximum Vacuum Maximum Vacuum |
|---|
|
Element Height Element Height |
|---|
|
|
|
Overall Diameter Overall Diameter |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Removes Particle Size Down To Removes ParticleSize Down To |
|---|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Noise, Filtration, and Flow Ratings
More
Clear-View Vacuum-Rated Air-Intake Filters
These filters have a clear housing so you can monitor collecting debris without stopping flow. Typically used on vacuum pumps, they ensure that clean air is going in and coming out of your system.
For technical drawings and 3-D models, click on a part number.
Filters | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Element | Repl. Elements | ||||||||||||||
| Pipe Size | Thread Type | Gender | Max. Flow Rate | Max. Vacuum | Max. Temp., °F | Ht. | Dia. | Removes Particle Size Down To, microns | Ht. | ID | OD | Material | Each | Each | ||
| 3/4 | NPT | Female | 4 scfm @ 14.7 psi | 29.9 in. of Hg | 125° | 9 1/4" | 5 1/2" | 50 | 4 1/2" | 1" | 2 3/4" | 304 Stainless Steel | 000000 | 0000000 | 000000 | 000000 |
| 3/4 | NPT | Female | 15 scfm @ 14.7 psi | 29.9 in. of Hg | 125° | 14 1/8" | 5 1/2" | 50 | 9 1/2" | 1" | 2 3/4" | 304 Stainless Steel | 000000 | 000000 | 000000 | 00000 |
Vacuum-Rated Air-Intake Filters
Typically used on vacuum pumps, these filters ensure that clean air is going in and coming out of your system. Install them on the inlet to stop dust from entering your equipment.
Replacement elements are sold separately. HEPA elements have greater efficiency for high-purity applications, but they reduce the maximum flow rate of your filter. Polyester and fiberglass are more durable than paper.
For technical drawings and 3-D models, click on a part number.
O'all | Element | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Gender | Max. Flow Rate | Max. Vacuum | Max. Temp., °F | Ht. | Dia. | Removes Particle Size Down To, microns | Filter Efficiency | Ht. | ID | OD | Material | Each | ||
| A | 1/2 | NPT | Female | 15 scfm @ 14.7 psi | 29.9 in. of Hg | 200° | 12 3/4" | 3 5/8" | 10 | Not Rated | 9 11/16" | 1 1/16" | 2 9/16" | Polyester Plastic | 0000000 | 0000000 |
| A | 1 | NPT | Female | 40 scfm @ 14.7 psi | 29.9 in. of Hg | 200° | 12 3/4" | 3 5/8" | 10 | Not Rated | 9 11/16" | 1 1/16" | 2 9/16" | Polyester Plastic | 0000000 | 00000000 |
| B | 2 | NPT | Female | 175 scfm | 29.9 in. of Hg | 220° | 13" | 9" | 5 | Not Rated | 8 3/4" | 3 1/2" | 5 7/8" | Polyester Plastic | 0000000 | 000000 |
| B | 4 | NPT | Female | 520 scfm | 29.9 in. of Hg | 220° | 18 7/8" | 13 1/2" | 5 | Not Rated | 9 5/8" | 4 3/4" | 7 7/8" | Polyester Plastic | 0000000 | 00000000 |
| C | 3/8 | NPT | Female | 18 scfm | 29.9 in. of Hg | 220° | 3 5/8" | 3 3/4" | 5 | 99% | 2 11/16" | 1 1/2" | 2 1/2" | Polyester Plastic | 0000000 | 000000 |
| C | 1/2 | NPT | Female | 18 scfm | 29.9 in. of Hg | 220° | 3 5/8" | 3 3/4" | 5 | 99% | 2 11/16" | 1 1/2" | 2 1/2" | Polyester Plastic | 0000000 | 000000 |
| C | 1/2 | NPT | Female | 20 scfm | 29.9 in. of Hg | 220° | 4 1/8" | 5 7/8" | 5 | 99% | 2 3/4" | 2 3/8" | 3 7/8" | Polyester Plastic | 0000000 | 000000 |
| C | 3/4 | NPT | Female | 24 scfm | 29.9 in. of Hg | 220° | 3 5/8" | 3 3/4" | 5 | 99% | 2 11/16" | 1 1/2" | 2 1/2" | Polyester Plastic | 0000000 | 000000 |
| C | 3/4 | NPT | Female | 25 scfm | 29.9 in. of Hg | 220° | 4 1/8" | 5 7/8" | 5 | 99% | 2 3/4" | 2 3/8" | 3 7/8" | Polyester Plastic | 0000000 | 000000 |
| C | 1 | NPT | Female | 40 scfm | 29.9 in. of Hg | 220° | 6 3/4" | 7 5/16" | 5 | 99% | 4 3/4" | 2 9/16" | 5" | Polyester Plastic | 0000000 | 000000 |
| C | 1 1/4 | NPT | Female | 60 scfm | 29.9 in. of Hg | 220° | 6 3/4" | 7 5/16" | 5 | 99% | 4 3/4" | 2 9/16" | 5" | Polyester Plastic | 0000000 | 000000 |
| C | 1 1/2 | NPT | Female | 80 scfm | 29.9 in. of Hg | 220° | 6 3/4" | 7 5/16" | 5 | 99% | 4 3/4" | 2 9/16" | 5" | Polyester Plastic | 0000000 | 000000 |
| C | 2 | NPT | Female | 175 scfm | 29.9 in. of Hg | 220° | 10" | 8 3/4" | 5 | 99% | 8 3/4" | 3 1/2" | 5 7/8" | Polyester Plastic | 0000000 | 000000 |
| C | 2 1/2 | NPT | Female | 210 scfm | 29.9 in. of Hg | 220° | 10 1/2" | 8 3/4" | 5 | 99% | 8 3/4" | 3 1/2" | 5 7/8" | Polyester Plastic | 0000000 | 000000 |
| C | 3 | NPT | Female | 300 scfm | 29.9 in. of Hg | 220° | 15 3/4" | 13 1/4" | 5 | 99% | 10" | 4 7/8" | 9 1/4" | Polyester Plastic | 0000000 | 000000 |
| D | 3 | NPT | Male | 300 scfm | 29.9 in. of Hg | 220° | 27 1/4" | 14" | 5 | 99% | 9 5/8" | 4 3/4" | 7 7/8" | Polyester Plastic | 0000000 | 00000000 |
| D | 4 | NPT | Male | 520 scfm | 29.9 in. of Hg | 220° | 27 1/4" | 14" | 5 | 99% | 9 5/8" | 4 3/4" | 7 7/8" | Polyester Plastic | 0000000 | 00000000 |
| Replacement Clips for Styles B and C | 0000000 | Each | 00000 |
| Ht. | ID | OD | Housing Material | Removes Particle Size Down To, microns | Filter Efficiency | Each | |
| 2 11/16" | 1 1/2" | 2 1/2" | Carbon Steel | 2 | 99% | 0000000 | 000000 |
| 2 3/4" | 2 3/8" | 3 7/8" | Carbon Steel | 2 | 99% | 0000000 | 00000 |
| 4 3/4" | 2 9/16" | 5" | Carbon Steel | 2 | 99% | 0000000 | 00000 |
| 8 3/4" | 3 1/2" | 5 7/8" | Carbon Steel | 2 | 99% | 0000000 | 00000 |
| 9 5/8" | 4 3/4" | 7 7/8" | Carbon Steel and Plastisol | 2 | 99% | 0000000 | 00000 |
| 10" | 4 7/8" | 9 1/4" | Carbon Steel | 2 | 99% | 0000000 | 000000 |
| Ht. | ID | OD | Housing Material | (Web) For Use With | (Web) For Reducing | (Web) Housing Material | Removes Particle Size Down To, microns | Filter Efficiency | Each | |
| 2 11/16" | 1 1/2" | 2 1/2" | Carbon Steel | Air, Inert Gases | Particles | Carbon Steel | 5 | 99% | 0000000 | 000000 |
| 2 3/4" | 2 3/8" | 3 7/8" | Carbon Steel | Air, Inert Gases | Particles | Carbon Steel | 5 | 99% | 0000000 | 00000 |
| 4 3/4" | 2 9/16" | 5" | Carbon Steel | Air, Inert Gases | Particles | Carbon Steel | 5 | 99% | 0000000 | 00000 |
| 8 3/4" | 3 1/2" | 5 7/8" | Carbon Steel | Air, Inert Gases | Particles | Carbon Steel | 5 | 99% | 0000000 | 00000 |
| 9 5/8" | 4 3/4" | 7 7/8" | Carbon Steel and Plastisol | __ | __ | __ | 5 | 99% | 0000000 | 00000 |
| 9 11/16" | 1 1/16" | 2 9/16" | Carbon Steel | __ | __ | __ | 10 | Not Rated | 0000000 | 000000 |
| 10" | 4 7/8" | 9 1/4" | Carbon Steel | Air, Inert Gases | Particles | Carbon Steel | 5 | 99% | 0000000 | 000000 |
| Ht. | ID | OD | Housing Material | Removes Particle Size Down To, microns | Filter Efficiency | Each | |
| 2 11/16" | 1 1/2" | 2 1/2" | Carbon Steel | 0.3 | 99.97% | 0000000 | 000000 |
| 2 3/4" | 2 3/8" | 3 7/8" | Carbon Steel | 0.3 | 99.97% | 0000000 | 00000 |
| 4 3/4" | 2 9/16" | 5" | Carbon Steel | 0.3 | 99.97% | 0000000 | 00000 |
| 8 3/4" | 3 1/2" | 5 7/8" | Carbon Steel | 0.3 | 99.97% | 0000000 | 000000 |
| 9 5/8" | 4 3/4" | 7 7/8" | Carbon Steel | 0.3 | 99.97% | 0000000 | 000000 |
| 10" | 4 7/8" | 9 1/4" | Carbon Steel | 0.3 | 99.97% | 0000000 | 000000 |
High-Vacuum Air-Intake Filters
Install these filters between your high-vacuum chamber and the inlet of your pump to remove dust, water vapor, and other contaminants from the system and protect the pump. Commonly used in vacuum-furnace and coating applications, they have a polyester filter element that traps particles as small as 5 microns. All filters have been helium-leak tested to ensure quality. When the filter element becomes clogged, you can replace it.
Quick-clamp connections are also known as KF, QF, and NW connections; they require a ring and quick clamp (sold separately) to complete the connection.
Claw-clamp connections are also known as ISO-K connections; use a ring and multiple claw clamps (sold separately) to secure. Double-claw clamps attach to the grooves on the fittings. Single-claw clamps have a clamp on one end and an exposed bolt on the other. Thread the bolt-end directly into the body of pumps, valves, or other high-vacuum components.
For technical drawings and 3-D models, click on a part number.
Air-Intake Filters | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Element | Replacement Elements | |||||||||||||
| High-Vacuum Flange Size | Flange OD | For Tube OD | Max. Flow Rate | Max. Vacuum | Temp. Range, °F | Ht. | Dia. | Removes Particle Size Down To, microns | Filter Efficiency | Ht. | OD | Each | Each | ||
Quick-Clamp (ISO-KF) Connection—Polyester Plastic Element | |||||||||||||||
| 16 | 1.18" | 3/4" | 23 scfm @ 14.7 psi | 1 × 10 -3 torr @ 72° F | -15° to 220° | 3 7/8" | 3 3/4" | 5 | 99% | 2 11/16" | 2 1/2" | 0000000 | 0000000 | 0000000 | 000000 |
| 25 | 1.57" | 1" | 35 scfm @ 14.7 psi | 1 × 10 -3 torr @ 72° F | -15° to 220° | 4 3/8" | 5 3/4" | 5 | 99% | 2 3/4" | 3 7/8" | 0000000 | 000000 | 0000000 | 00000 |
| 40 | 2.16" | 1 1/2" | 80 scfm @ 14.7 psi | 1 × 10 -3 torr @ 72° F | -15° to 220° | 7 3/16" | 7 3/8" | 5 | 99% | 4 3/4" | 5" | 0000000 | 000000 | 0000000 | 00000 |
| 50 | 2.95" | 2" | 175 scfm @ 14.7 psi | 1 × 10 -3 torr @ 72° F | -15° to 220° | 11 11/16" | 8 3/4" | 5 | 99% | 8 3/4" | 5 7/8" | 0000000 | 000000 | 0000000 | 00000 |
Claw-Clamp (ISO-K) Connection—Polyester Plastic Element | |||||||||||||||
| 63 | 3.74" | 2 1/2" | 175 scfm @ 14.7 psi | 1 × 10 -3 torr @ 72° F | -15° to 220° | 11 11/16" | 8 3/4" | 5 | 99% | 8 3/4" | 5 7/8" | 0000000 | 000000 | 0000000 | 00000 |
| 100 | 5.12" | 4" | 300 scfm @ 14.7 psi | 1 × 10 -3 torr @ 72° F | -15° to 220° | 16 1/8" | 13 1/4" | 5 | 99% | 10" | 9 1/4" | 0000000 | 00000000 | 0000000 | 000000 |
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For High-Vacuum Flange Size | For Flange OD | For Tube OD | High Vacuum Connection Type | O-Ring | Inner Ring | Max. Vacuum | Max. Temp., °F | Each | |
Quick-Clamp Connection | |||||||||
| 16 | 1.18" | 3/4" | ISO-KF | Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 300° | 00000000 | 00000 |
| 25 | 1.57" | 1" | ISO-KF | Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 300° | 0000000 | 0000 |
| 40 | 2.16" | 1 1/2" | ISO-KF | Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 300° | 0000000 | 00000 |
| 50 | 2.95" | 2" | ISO-KF | Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 300° | 0000000 | 00000 |
Claw-Clamp Connection | |||||||||
| 100 | 5.12" | 4" | ISO-K | Viton® Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -9 torr @ 72° F | 400° | 0000000 | 00000 |
| 63 | 3.74" | 2 1/2" | ISO-K | Viton® Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -9 torr @ 72° F | 400° | 0000000 | 00000 |
| For High-Vacuum Flange Size | For Flange OD | For Tube OD | High Vacuum Connection Type | Material | Max. Vacuum | Each | |
Quick-Clamp Connection—Clamp with Wing Nut | |||||||
|---|---|---|---|---|---|---|---|
| 10, 16 | 1.18" | 1/2", 3/4" | ISO-KF | Aluminum | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
| 25 | 1.57" | 1" | ISO-KF | Aluminum | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
| 40 | 2.16" | 1 1/2" | ISO-KF | Aluminum | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
| 50 | 2.95" | 2" | ISO-KF | Aluminum | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
Claw-Clamp Connection—Double-Claw Clamp with Bolt | |||||||
| 63, 80, 100 | 3.74", 4.33", 5.12" | 2 1/2", 3", 4" | ISO-K | Aluminum | 1 × 10 -9 torr @ 72° F | 0000000 | 0000 |
Claw-Clamp Connection—Single-Claw Clamp with Bolt | |||||||
| 63, 80, 100 | 3.74", 4.33", 5.12" | 2 1/2", 3", 4" | ISO-K | Aluminum | 1 × 10 -9 torr @ 72° F | 0000000 | 0000 |
| Each | ||
| 0000000 | 00000 |
Compact Vacuum-Rated Air-Intake Filters
Use one of these compact filters in a tight spot, or combine up to ten for a manifold application. Typically used on vacuum pumps, they ensure that clean air is going in and coming out of your system.
For technical drawings and 3-D models, click on a part number.
O'all | Element | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Gender | Max. Flow Rate | Max. Vacuum | Max. Temp., °F | Ht. | Wd. | Lg. | Removes Particle Size Down To, microns | Ht. | Lg. | Wd. | Material | Each | |
| 1/8 | NPT | Female | 1.8 scfm @ 14.7 psi | 29.8 in. of Hg | 140° | 2 11/16" | 11/16" | 2 3/4" | 30 | 1 11/16" | 2 1/8" | 7/16" | Polyester Plastic | 0000000 | 000000 |
| 1/4 | NPT | Female | 7.1 scfm @ 14.7 psi | 29.8 in. of Hg | 140° | 2 11/16" | 1 1/8" | 2 3/4" | 30 | 1 5/8" | 2 3/16" | 7/8" | Polyester Plastic | 0000000 | 00000 |
Vacuum-Rated Air Separators for Water Removal
Improve vacuum system efficiency and protect components from moisture—these separators remove over 90% of water from air. Typically used with vacuum pumps, they minimize vacuum pressure drop, even when the element is saturated with water. Separators have a viewing window so you can see inside to monitor water removal. Mount separator vertically for proper drainage (brackets sold separately), and install before air filters.
For technical drawings and 3-D models, click on a part number.
Separators | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | O'all | Drain | Element | Mounting Brackets | ||||||||||||||
| Inlet | Outlet | Max. Flow Rate | Max. Vacuum | Max. Temp., °F | Ht. | Dia. | Filter Efficiency | Bowl Cap., fl. oz. | Bowl Material | Pipe Size | Thread Type | Gender | Ht. | OD | Each | Each | ||
NPT Female Connections | ||||||||||||||||||
| 1/4 | 1/4 | 7 scfm @ 14.7 psi | 29.5 in. of Hg | 140° | 6 5/8" | 2 1/16" | 90% | 1 | Polycarbonate Plastic | 1/8 | BSPT | Female | 1 3/4" | 1 3/16" | 0000000 | 0000000 | 0000000 | 00000 |
| 3/8 | 3/8 | 7 scfm @ 14.7 psi | 29.5 in. of Hg | 140° | 6 5/8" | 2 1/16" | 90% | 1 | Polycarbonate Plastic | 1/8 | BSPT | Female | 1 3/4" | 1 3/16" | 0000000 | 000000 | 0000000 | 0000 |
| 3/8 | 3/8 | 10.6 scfm @ 14.7 psi | 29.5 in. of Hg | 140° | 8 1/16" | 2 3/4" | 90% | 2.8 | Polycarbonate Plastic | 1/8 | BSPT | Female | 2 7/8" | 1 7/16" | 0000000 | 000000 | 0000000 | 0000 |
| 1/2 | 1/2 | 10.6 scfm @ 14.7 psi | 29.5 in. of Hg | 140° | 8 1/16" | 2 3/4" | 90% | 2.8 | Polycarbonate Plastic | 1/8 | BSPT | Female | 2 7/8" | 1 7/16" | 0000000 | 000000 | 0000000 | 0000 |
| 3/4 | 3/4 | 17.6 scfm @ 14.7 psi | 29.5 in. of Hg | 140° | 11 3/16" | 3 1/2" | 90% | 2.8 | Polycarbonate Plastic | 1/8 | BSPT | Female | 3 3/8" | 1 5/8" | 0000000 | 000000 | 0000000 | 0000 |
| 1 | 1 | 17.6 scfm @ 14.7 psi | 29.5 in. of Hg | 140° | 11 3/16" | 3 1/2" | 90% | 2.8 | Polycarbonate Plastic | 1/8 | BSPT | Female | 3 3/8" | 1 5/8" | 0000000 | 000000 | 0000000 | 0000 |
Water Aspirator Pumps
Pick up chemical spills and remove liquids in vacuum filtering systems—these pumps create suction to draw up liquids and gases as water flows through them. They’re made of HDPE and polyethylene, so they won’t break down when exposed to highly corrosive chemicals and acids. The suction end has a barbed tube connector, which attaches to your vacuum tubing. The connector stays attached to your vacuum tubing and connects to the pump when you’re ready to use it again. These pumps also have an internal check valve to prevent backflow.
Suction | Intake | Discharge | Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | Maximum Vacuum, in. of Hg | Minimum Operating Pressure, psi | Temperature Range, °F | For Tube ID | Gender | Pipe Size | Thread Type | Gender | Outlet Connection Type | Gender | Length | Width | Includes | Each | |
| 1.5 | 27 | 11 | -140° to 240° | 1/4", 5/16", 3/8" | Male | 3/8 | NPT | Male | Open | Female | 3" | 3" | 4 1/2" Length of 3/8" OD Polyethylene Tubing | 00000000 | 000000 |