Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

These lights produce a wide beam of uniform light to fill large, open areas with ceilings up to 18-ft. high.

Upgrade your existing hazardous location bay lights to energy-efficient LEDs.

Mount these lights in recessed spaces so the lens is flush with the ceiling or wall. NEC Classes I and II, they’re safe to use in paint spray booths, blast booths, and other areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust.

Also known as sconces, these lights are a stylish choice for ambient and accent lighting in hallways and entryways. They’re UL or ETL listed for wet locations, so you can install them outdoors—rain and humidity won’t be a problem.

A sealed lens keeps moisture out to protect these lights against washdowns.

Upgrade your existing bay lights to energy-efficient LEDs without replacing your mounting hood or conduit. These lights are NEMA 4X rated, so they’re sealed to withstand sprayed water and cleaning chemicals from washdowns.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Brighten high-traffic areas with our most rugged ceiling lights. Rated IK10, the highest impact resistance rating, they’re protected by a 16-gauge cold-rolled steel frame and polycarbonate lens.

Don’t waste energy lighting unoccupied spaces—these lights turn on when they detect movement.

Light up spaces that have no electrical connection or are difficult to wire, such as sheds and closets.

Upgrade your fluorescent recessed lighting to energy-efficient LEDs without removing fixtures and exposing insulation.

Maximize the light that reaches your shelving. Often used in storage rooms and warehouse rack rows, these lights have reflectors that direct all light downwards from ceilings up to 24 ft. high.

Often used in stairwells and hallways, these lights save energy by only turning on when they sense movement.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

Create ambient and accent lighting with these sleek, modern lights that shine above, below, and around themselves.

Prevent contaminants from entering your ISO Class 3 clean room—these lights have an airtight seal.

These lights are UL listed for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.

Also known as wall packs, these lights mount to exterior walls and ceilings.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Heads adjust to any angle so you can direct light where needed.

These thin, flexible lights wrap around equipment, hide under cabinets, and squeeze into tight spaces—all you need is an outlet. Just peel and stick to attach them to any smooth surface.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.

Update conventional fluorescent tubular lights with newer LED technology. These lights match the diameter of most older lights and fit existing brackets without the need to drill new mounting holes.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

Rated for use in damp locations, these lights withstand humidity and moisture.

These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.

Rated NEMA 4X, these lights are protected from corrosion and washdowns.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed.

A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers.

Bring light to explosion-prone work areas. Rated NEC Class I, these lights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service.

Safely light up large spaces where combustible gases and dust are normally present. Rated NEC Class I and II, these lights have a housing that contains any sparks or flames and seals out ignitable gases, vapors, and dust.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, Class II, and Zone 1.

Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you need them.

Pop these lights on magnetic surfaces to brighten wet spaces. Rated NEMA 6 and ETL listed, you can splash, spray, or dunk them in water, and they’ll keep working.

Bring light to remote, wet areas. These floodlights are IP rated to handle humidity and dripping, splashing, and falling liquids. Adjust their tripod up and down to direct light as far as you need.

Light up remote spaces without having to keep track of a new cordless tool battery. These floodlights run on a Milwaukee M18 battery (sold separately). These lights extend up to 7 ft. tall and have a pivoting head to direct light where you need it.

Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed.

Compact and easy to carry, these ETL listed lights stand up to dripping, splashing, and falling liquids. The head adjusts up and down to direct light where it's needed.

Raise, lower, and tilt these lights to brighten your work in wet spaces.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.