These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

Seal leaks around small holes.

Repair stripped threads on female connections, such as oil pans, valve covers, and distributor caps.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

Made of indium, this foil is more thermally conductive than thermal interface materials (TIMs) made of plastic.

Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.

Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

For use when thickness will be less than 2", sand mixes consist of cement and sand.

Used for brick, block, and stone laying as well as for repairing masonry, mortar mixes consist of fine sand and masonry cement.

Use these two-part fillers to rebuild cracked or worn plastic surfaces.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Spread patching compounds in dry, wet, and even water-filled holes.

Simplify and speed up hole repairs—stick a patch over the area and cover with spackling compound.

Also known as Plaster of Paris, these fillers conceal small cracks, nail holes, and blemishes. Mix with water.

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

Tape hides seams and smooths out corners. It has an adhesive back for bonding and requires joint compound for finishing. It can also be used to repair damaged walls.

Rub these tools along the mortar between bricks for a uniform, finished appearance.

Remove hardened flecks of mortar, dirt, and other debris.

Slide these tools along the perimeter of poured concrete slabs to create a rounded edge for a finished appearance that resists chipping.

Also known as mortar hoes, the blade on these tools has holes to allow concrete to pass through as you mix.

Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.

Push and pull freshly-poured concrete.

Create grooves in poured concrete slabs to control cracking caused by drying, settling, and freezing.

Roll the seams where wall coverings meet for an even, continuous appearance.

Keep drywall compound close at hand so you can apply it over seams quickly and efficiently.

These knives have a sturdy blade for scraping paint and debris and for applying and smoothing joint and spackling compounds.

Use these mashers to mix drywall compound in large containers.

Smooth joint compound on both sides of an interior corner with these trowels.

These patching compounds are the most flexible and watertight we offer.

Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.

Fix damaged wood or build up and replace missing wood.

Make flexible, waterproof repairs to rips and tears in canvas, leather, and acrylic fabric.

Cover large areas with this two-part expanding foam insulation.

Expanding quickly to fill large voids, this foam insulation begins to harden in 4 minutes and can be cut within 10 minutes.

These inflatable paper bags prevent tipping and provide a cushion between products to reduce damage during transit.

Plastic liners resist punctures, moisture, and many acids.

The raised pattern provides absorbency as well as extra thickness for sharp or heavy items. This paper works well as an interleaving material.

Also known as freezer paper, this paper is appropriate for food contact. A polyethylene coating on one side provides resistance to moisture and tearing.

Also known as newsprint, this paper is a clean, low-cost fill material.

Treated with wax, these paper sheets resist tearing and have a slippery surface that protects products and foods from scratches or sticking together during manufacturing, shipping, and storing. Use them to wrap your items or even as a nonstick work surface.

Also known as newsprint, this paper is a clean, low-cost fill material.

Peanuts loosely fill the space around items of any shape to prevent movement and reduce impact during shipment.

Guide peanuts into a shipping container. A valve controls the flow.

This wrap clings to itself but not the item being wrapped, and continues to adhere after multiple uses.

Cushion fragile items without the bulk of bubble wrap.

This wrap clings to itself but not the item being wrapped, and continues to adhere after multiple uses.

An alternative to caulk and rubber sealants, this tape comes compressed and gradually expands to fill large gaps and voids.