Specifications Met Specifications Met |
|---|
|
Impact-Resistant Touch Bars
Rugged construction withstands impact from carts, dollies, and other equipment. Often used on emergency exits, these touch bars open doors with a push and have a hydraulic damper for quiet operation. You can use them alone or mount an optional handle on the outside of the door. All can be cut to fit a range of door widths.
Use the built-in retainer to hold touch bars in the unlatched position to allow traffic to pass freely through doorways. Latch bolt projection is the length the latch bolt extends from the door's edge.
Touch bars for double doors have vertical rods that latch into strike plates mounted on the floor and ceiling.
Touch bars for double/single doors do not include vertical rods. When used on double doors, a center support (not included) is required.
| For Door Thick. | For Door Wd. | Latch Bolt Projection | Overall Wd. | Bar Projection | Housing Material | Bar Material | For Door Swing Direction | Mounting Hardware Included | Choose a Finish | Each | |
Von Duprin 99 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 3/4"-2 1/4" | 28"-36" | 3/4" | 33" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | 0000000 | 0000000 | |
| 1 3/4"-2 1/4" | 28"-36" | 3/4" | 33" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | Dull Aluminum | 0000000 | 000000 |
| 1 3/4"-2 1/4" | 34"-48" | 3/4" | 45" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | 0000000 | 00000000 | |
| 1 3/4"-2 1/4" | 34"-48" | 3/4" | 45" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | Dull Aluminum | 0000000 | 000000 |
| For Door Thick. | For Door Wd. | For Max. Door Ht., ft. | Latch Bolt Projection | Overall Wd. | Bar Projection | Housing Material | Bar Material | For Door Swing Direction | Mounting Hardware Included | Choose a Finish | Each | |
Von Duprin 99 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 3/4"-2 1/4" | 28"-36" | 7 | 5/8" | 33" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | 0000000 | 000000000 | |
| 1 3/4"-2 1/4" | 28"-36" | 7 | 5/8" | 33" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | Dull Aluminum | 0000000 | 00000000 |
| 1 3/4"-2 1/4" | 34"-48" | 7 | 5/8" | 45" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | 0000000 | 00000000 | |
| 1 3/4"-2 1/4" | 34"-48" | 7 | 5/8" | 45" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | Dull Aluminum | 0000000 | 00000000 |
Fire-Rated Touch Bars
This touch bar is rated for use with three-hour fire doors. Often used on emergency exits, it opens doors with a push and has a hydraulic damper for quiet operation. You can use it alone or mount an optional handle on the outside of the door. All can be cut to fit a range of door widths.
Latch bolt projection is the length the latch bolt extends from the door's edge.
| For Door Thick. | For Door Wd. | Latch Bolt Projection | Overall Wd. | Bar Projection | Housing Material | Bar Material | Finish | For Door Swing Direction | Mounting Hardware Included | Each | |
For Double/Single Doors | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Von Duprin 99 | |||||||||||
| 1 3/4"-2 1/4" | 28"-36" | 3/4" | 33" | 3 7/8" | Steel | Aluminum | Dull Chrome | Left, Right | Yes | 0000000 | 000000000 |
| Door Handle Type | Material | Finish | For Door Swing Direction | Each | |
Kaba Simplex 5000 | |||||
|---|---|---|---|---|---|
| Self Locking with Combination, Self Locking with Key Lever | Brass | Dull Chrome | Left, Right | 0000000 | 0000000 |