Unlike paint that must be diluted, this paint comes ready for use with an air brush. Its water-based formula can be cleaned up with soap and water, so air brushes are easy to keep clean.

This paint is formulated to produce less odor than typical paint.

Safety-color paint comes in colors approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment. Safety red indicates danger and is often used on fire protection equipment, containers for flammable liquid, and switches on machinery. Safety orange indicates hazards and is often used on warning signs, construction equipment, and unguarded edges. Safety yellow indicates caution and is often used on tripping hazards, exposed edges, and start buttons. Safety green indicates general safety and is often used to identify first aid kits and other medical equipment and to explain safety procedures. Safety blue is used on “out of order,” “employees only,” and other general-information signs.

This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.

Make items stand out under emergency lighting or in low-light environments. Excellent for signs and emergency equipment, this paint is clear so it won’t obscure the color of your item.

Spray this paint on the back of glass or clear plastic to create a reflective silver effect on the other side. One coat will create a translucent appearance; use up to five coats for a mirror-like finish. Allow paint to dry for one minute between coats. Apply a layer of clear or flat black paint after all layers dry completely to protect finish from chipping and scratching.

Make your surface magnetic with this paint. It’s designed for use as an undercoat—cover with water-based paint. Apply with a brush, roller, or sprayer.

Make a magnetic writing surface for your workspace. Apply paint with a brush or roller; do not apply with a sprayer.

Create a washable writing surface.

Turn any surface into a dry-erase board. Spray this paint onto metal, glass, and plastic to create a durable finish that works with most dry-erase markers and cleaners. It can also be used on drywall and other smooth surfaces that are already painted.

These sheets are made of rubber and iron oxide, letting you create a nonmetallic, nonmagnetic surface that magnets will stick to. Sheets can be cut with scissors to create custom shapes and sizes.

Prepare metal, wood, and concrete for paint. Primers adhere to underlying surfaces to create a base layer that bonds well with paint for a long-lasting finish.

Use primer in an aerosol can for quick jobs and touch-ups. Alkyd primer is good for general purpose applications. Lacquer primer is designed for use with metal.

Apply primer in a one-gallon can with a brush, roller, or sprayer. Use red primer on rusty and abrasive-blasted steel. Follow with a coat of gray primer. Use gray primer on galvanized steel and on all other surfaces.

Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings. Apply with a brush, roller, or sprayer.

Acrylic primer prepares surfaces for paint.

Epoxy primer prepares surfaces for epoxy coatings. The size listed is the combined total of the two parts.

For use in damp areas, these primers dry to a finish that prevents future stains caused by mold and mildew. Use them to cover existing stains and to extend the life of paint and coatings. Apply with a brush or roller.

These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings. Choose gray for light-color topcoats; red for medium-color topcoats; and black for dark topcoats.

Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.

Acrylic primer can be applied directly to metal. It resists corrosion, mold, and mildew. Apply with a brush, pad, roller, or sprayer.

Shellac primer seals in odors and has the best stain-blocking ability of any of the primers we offer. It also seals knots and sap in wood. Apply with a brush, roller, or sprayer.

Use this zero-VOC primer on drywall in enclosed occupied areas, such as hospitals, schools, and offices, to extend the life of paint. Apply with a brush, roller, or sprayer.

Increase paint’s ability to bond to hard, smooth surfaces, such as tile and metal.

Acrylic primer is often used on previously painted hard, slick, or glossy surfaces. Use it indoors or out. Apply with a brush, roller, or sprayer.

Epoxy primer is designed for use on floors to improve the longevity of paint and coatings. This low-odor primer can be used in enclosed occupied areas. For indoor use only. The size listed is the combined total of the two parts. Apply with a brush or roller.

Use these primers on concrete floors before antislip coatings to maximize longevity. They do not contain grit. Apply with a brush or roller. The size listed is the combined total of the two parts.

These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating. Primers resist abrasion and chemicals, such as mild acids, alkalies, salt, and fuel. Apply with a roller. The size listed is the combined total of the two parts.