These durable wash guns are typically used for frequent washdowns and cleanup.

These wash guns have a high maximum pressure, so use them with pressure washers and high-pressure spray systems.

Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose.

With a high maximum pressure and quick-disconnect nozzle connection, these wash guns work with pressure washers and high-pressure spray systems and it’s easy to swap out their nozzles.

The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.

Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.

A check valve prevents the nozzle from dripping when it is turned off. Spray tips can be removed for cleaning and replacement.

A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.

Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.

The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.

With a unique spiral design, these nozzles produce high flow rates and are clog-resistant.

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

Create small, atomized spray droplets for cooling, moistening, and humidifying applications. These nozzles have a check valve that prevents dripping when they’re turned off

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

With a unique spiral tip, these nozzles produce high flow rates and are clog-resistant.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

Push the nozzle out for higher pressures and pull it back for lower pressures. Turn the cover to adjust the spray angle from 0° to 25° or 75°.

Combining rotation with a solid stream, these nozzles spray in a 25° hollow cone shape to cover a wide area. They’re easy to remove thanks to their quick-disconnect hose connection.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

No need to switch between nozzles—push these nozzles in and pull them out to change their pressure level, and twist their cover to adjust the spray angle between 0° and 40°. Their quick-disconnect hose connection makes attaching and removing them easy.

These nozzles produce a concentrated stream for more effective cleaning than stationary nozzles.

Designed for food, pharmaceutical, and other sanitary environments, these nozzles rotate and have a 360° spray pattern to clean tanks and vessels more thoroughly and effectively than stationary nozzles.

Often used in sanitary environments, these nozzles are clog-resistant and have no moving parts to maintain.

Kits contain lengths of hose, nozzles, valves, and caps.

Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.

Use with Snap-Loc hose to assemble and disassemble components.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

For high-pressure coolant lines, these nozzles withstand pressure up to 500 psi.

These dispensers have a reservoir for recirculating coolant.

Draw coolant from your existing tank.

Replace messy mist coolant dispensers—these convert compressed air into a stream of cold air. They can be used in applications where liquid coolant can't.

There’s no shut-off valve on these nozzles, so water instantly flows.

Convert your blowgun to a spray gun. These nozzles spray air and liquids at the same time.