The three weld points on these metric hex nuts create a secure hold on a steel surface.

You can weld these metric nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold.

When you need a high strength-to-weight ratio and extreme corrosion resistance, choose these titanium weld nuts.

Install metric threads in channels and other tight spaces where round-base weld nuts won’t fit.

Slim at the base, these weld nuts fit in channels and other spaces too tight for round-base weld nuts. Weld them to stainless steel surfaces to add strong, permanent threads that resist corroding from chemicals.

Projections on the base concentrate the weld and create space for heat to dissipate, protecting the threads on these weld nuts from deforming. Made of 18-8 stainless steel, they withstand mild chemicals and can be used in wet and outdoor environments.

Projections on the base concentrate the weld and create space for heat to dissipate, protecting the threads on these steel weld nuts from deforming.

Weld these nuts to stainless steel surfaces.

To protect their threads from deforming, these stainless steel nuts have a projection that concentrates your weld and creates room for heat to dissipate. An offset barrel lets you position threads near the edges and corners of stainless steel sheets.

A smooth base on these metric nuts provides more contact with the mating surface than weld nuts with projections

Projections on the base concentrate the weld and provide room for heat to dissipate.

These steel nuts have a short collar to fit in low-clearance areas.

Threads float inside the retainer so you can install a bolt at a slight angle to align with off center parts.

Install corrosion-resistant threads in sheet metal to create a 90° joint.

Use these tube-end weld nuts with left-hand threaded fasteners.