Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. They are CSA certified for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They are rated NEMA 4X for protection against corrosion and washdowns. Lights are sealed to keep moisture out. They can be hardwired to operate on any of the voltages listed. Some work with LED or incandescent bulbs (sold separately).

Styles 1, 2, 3, 5, and 6 can be used in environments where ignitable concentrations of flammable/combustible gases, vapors, and liquids or combustible dust occur infrequently, such as in the case of an accidental spill or failure of a ventilation system, and where combustible/ignitable fibers or flyings are present under normal operating conditions and/or during frequent equipment maintenance or failure. Rated for Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III, Divisions 1 and 2, these lights withstand acetylene, hydrogen, ethylene, propane, carbonaceous dusts, and nonconductive dusts.

Styles 4 and 7 can be used in environments where ignitable concentrations of hazardous material are present under normal operating conditions, and/or during frequent equipment maintenance or failure. Rated for Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2, these lights withstand ethylene, propane, conductive or metal dusts, carbonaceous dusts, nonconductive dusts, and combustible/ignitable fibers or flyings.

A sealed lens keeps moisture out to protect these lights against washdowns. With built-in LEDs, they last longer, are more efficient, and generate less heat than other light technologies. They emit a neutral white light often found in workspaces.

Style A and B have a wraparound lens that allows light to shine from the sides as well as the bottom. Style A have an acrylic lens that won’t turn yellow over time. Thread onto the ceiling using the 1/4”-28 mounting studs. Style B have a durable polycarbonate lens that’s more impact-resistant than acrylic. Use the included hardware to fasten to the ceiling.

Style C have a tubular lens that allows light to shine from all directions. The lens is acrylic so it won’t turn yellow over time. Lights meet NSF/ANSI 2 for use in food handling and processing areas.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. Lights are sealed to keep out humidity and dripping, splashing, and falling liquids.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other light technologies. They emit a neutral white light often found in workspaces.

Lights without bulbs work with medium (standard household) screw-in base LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a tempered glass lens are more impact resistant than those with a glass lens.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. Use the switch on the power supply to choose between warm, cool, or neutral light—no more mismatched lights. All have passed strict U.S. and Canadian safety standards.

For technical drawings and 3-D models, click on a part number.

These LED lights have an air-tight seal to protect against contaminants. The lens is prismatic to disperse light evenly. Lights can be hardwired to operate on any of the voltages listed. To install, drill mounting holes and seal with silicone (not included).

Also known as wall packs, these lights mount to exterior walls and ceilings. With built-in LEDs, they last longer, are more efficient, and generate less heat than other technologies. They can be hardwired to operate on any of the voltages listed. All have a prismatic lens that disperses light evenly.

Lights with a cool light appearance highlight white/blue tones creating good visibility at night.

Style A and D lights can be set to cool, neutral, or warm color appearances.

Ceiling-mount lights are also known as canopy lights.

Lights with a polycarbonate lens are more impact resistant than lights with a glass lens.

Lights with a photocell switch on/off automatically when they detect the presence or absence of light.

Also known as wall packs, these lights mount to exterior walls to illuminate building perimeters, entryways, loading docks, and other outdoor areas. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other technologies. They produce a neutral white light appearance. The lens is prismatic to disperse light evenly, and made of durable, impact-resistant polycarbonate.