A plastic cover on the barrel provides electrical insulation.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

Rated UL 94V0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

Easy to install, connect, and disconnect, yet difficult to shake loose. These terminals interlock with each other to make a secure connection.

Rated UL 94V0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

A plastic cover on the barrel provides electrical insulation.

Mount these terminals on a threaded screw or stud for a more secure connection than spade and hook terminals.

Mount these elongated ring terminals on a range of screw sizes.

A plastic cover on the barrel provides electrical insulation. These terminals can withstand temperatures up to 300° F.

When heat is applied, the enclosed solder melts, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

A serrated edge on the inside of the ring grips the mounting screw for a secure hold.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

Apply heat to shrink the insulation and create a seal that keeps out water, salt, and contaminants.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

Add strength and stability to stranded wire to protect it from damage and speed insertion into terminal blocks.

Also known as bullet terminals, these have a round tab that requires less space than the flat tab found on most quick-disconnect terminals.

These solid pins make it easier to insert stranded wire into screw-clamp connections.

A hybrid of ring and spade terminals, these install without removing the mounting screw, yet resist being pulled off.

Connect two female quick-disconnects.

Filled with silicone, these connectors seal out moisture and prevent corrosion.

Suitable for use in tight spaces, these connectors have a narrow profile that takes up less space than standard wire splicing connectors.

Grip the wings on these connectors to increase leverage when tightening.

Soft molding over the wings provides a comfortable grip.

Press down on the clamp to connect wires and pull it up to disconnect.

No wire stripping is required—these connectors will pierce the insulation.

Push stripped wires into connectors for a reliable connection that's faster to install than twisting or crimping.

These splices can withstand higher temperatures than insulated splices.

Crimp the barrel twice on each end for an extra-tight grip in high-vibration applications. A plastic cover fully insulates these splices.

The most secure, electrically conductive, and environmentally sealed connection we offer, these splices have enclosed solder that melts when heat is applied.

Able to withstand temperatures up to 900° F, these splices are suitable for use in high-heat applications such as ovens, motors, and light fixtures.

Filled with grease, these splices resist moisture and corrosion.

These splices can withstand higher temperatures than insulated splices.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Join wires in the dirtiest, wet, and harsh environments. These splices meet one of the toughest IP ratings—IP68.

Sealed threads make these splices weather resistant.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Compress the barrel twice on each end for an extra-tight grip in high-vibration applications.

Tap and splice multiple wires together at the same time.

Use a single splice to connect more than two wires.

Connect one wire to two wires of the same size. When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.

Filled with gel, these wire taps seal out moisture.

Tap a main wire or add a finished terminal to the end of a wire.

Combine a plug and a socket to form a terminal block—the two-piece design allows quick disconnection for equipment repairs.

Mount blocks to a panel or the surface of a machine. Also known as barrier terminal strips.

The spring-clamp terminals on these blocks make wire installation faster than with other types of terminals. Push wire into the spring clamp for a secure connection that withstands vibration.

Blocks are made of ceramic to withstand elevated temperatures.

The spring-clamp terminals on these blocks make wire installation faster than other types of terminals. Push wire into the spring clamp for a secure connection that withstands vibration.

Recessed terminals prevent accidental contact with a live circuit.

Before making a permanent connection, use these connectors to test a circuit. Also known as binding posts, they mount through panels to create a connection point.

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

With the help of distribution blocks, you can take a large wire from your power source and connect it to one or more wires going to your electrical devices.

Stack multiple ring or spade terminals on the stud terminal; the current flows through the stacked terminals.

Protect connections against corrosion.These bars are tin-plated copper and have stainless steel terminals.

Compress the barrel twice for an extra-tight grip in high-vibration applications.

An offset tongue gives you extra space to insert wire.

Slide these lugs onto cable and strike them with your hammer to create a durable connection.

Tighten the screw with a ¼" hex key wrench for a more secure connection than Hammer-On Welding Lugs.

Use the included crimping tool to install a variety of terminals and butt splices.

Keep a variety of ring terminal sizes on hand.

Connect these clamps to a wide range of wire sizes.

Insert your stripped cable into the compression nut and tighten; no crimping or heat is required.

Connect these lugs to cable with a crimping tool or by soldering.

Serrations on both sides lock these lugs in place.

Insert your stripped cable into the compression nut and tighten; no crimping or heat is required.