More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

Often used as bracing and guy wires, individual strands are thick solid wire for a stiff construction.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This braided wire has a stiff construction for use as bracing and guy wires.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This braided wire has a stiff construction for use as bracing and guy wires.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope gives this wire rope the flexibility required for repeat bending over drums and pulleys.

Not only is this phosphor bronze braided wire corrosion resistant, it inhibits sparking.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Flattened outer strands create a smooth surface area that spreads contact to reduce wear.

These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.

Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.

Make a removable loop without specialty tools for use in noncritical applications, such as fencing. Also known as tiller clamps.

Create a loop by feeding the wire rope through the clamp and tighten the set screw to secure it in place. Loosen the set screw to quickly adjust the loop. Also known as Gripple rope clamps. They are for use in noncritical applications, such as fencing.

Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

Keep multiple sleeves on hand in a variety of sizes.

Also known as heavy-pattern thimbles, these can be used to reinforce the loop of a sling.

The open-end design leaves more room for connections than other thimbles.

Install these clevis-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Use a new plug when installing a fitting on a different rope.

Place the wire rope and sleeve through a hole in the assembly block and tighten into a vise to hold. Then attach the plug driver on the end of a plug to make hammering in the plug easier.

Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Add a mounting-plate to wire rope without having to fray the rope or use a compression tool.

Add an eye-end to wire rope without having to fray the rope or use a compression tool.

Feed the wire rope into the opening at the bottom of these eye-end fittings and through the body for a quick and simple installation.

Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.

Compress the thin shank wall with a hand tool to attach these light duty clevis-end fittings. They are also known as hand swage fittings.

A thimble on the inside of the loop protects the wire rope from fraying.

Attach the 90° eye to a surface for support and use the loop to secure the suspended material.

Secure a ball with shank to a flat surface.

A large opening combined with an easy to open latch allows for quick and easy attachment to links and rings.

Made to meet stringent military standards, the fittings on these lanyards meet MS 20664 and MS 20668.

The swivel fork allows the lanyard to rotate freely.

The swivel fork ends allow the lanyard to rotate freely.

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

The galvanized finish resists corrosion.

This steel wire rope includes a hook with latch on one end for use with winches.

The swivel hook with latch installed on one end, prevents the wire rope from twisting. It is for use with winches.

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

The narrow end that restricts the movement of the rope and chain and a wide end that allows room to attach multiple connectors.

Also known as hammer locks, assemble by hammering a pin through the center.

For security, these connectors must be cut off to be removed.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Also known as lap links or repair links.

Strike the prongs with a ball peen hammer and they expand to hold the connecting link together.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

One end has a bolt fastened with a nut and cotter pin for a more secure connection than flush-pin connectors.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Indentations in the shackle body hold the head of the pin in place once fastened.

For use in low-vibration applications where the shackle remains stationary.