About Pulleys
More
Hanging Pulleys for Wire Rope—For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load. They have a bracket on the bottom for tying off one end of your wire rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Nylon is lighter in weight than metal. Aluminum is corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner can mount to steel framing or hang as part of your rigging system.
For technical drawings and 3-D models, click on a part number.
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Material | Housing Material | Each | ||
Single-Groove Without Bearing | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Eye | ||||||||||||
| A | 1/4" | 150 | 1 3/8" | 9/16" | 1 3/8" | 2 13/16" | 3/8" | 3/16" | Nylon Plastic | Stainless Steel | 0000000 | 000000 |
| A | 1/2" | 1,650 | 2" | 1 5/16" | 2" | 4 7/8" | 3/4" | 5/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| A | 9/16" | 2,475 | 3" | 1 5/16" | 3" | 7" | 15/16" | 7/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| A | 5/8" | 4,175 | 4" | 1 1/2" | 4" | 8" | 15/16" | 1/2" | Stainless Steel | Stainless Steel | 0000000 | 000000 |
Single-Groove With Bearing | ||||||||||||
Swivel Eye | ||||||||||||
| A | 3/16" | 150 | 1 1/4" | 9/16" | 1 1/4" | 2 3/4" | 3/8" | 3/16" | Steel | Stainless Steel | 0000000 | 00000 |
| B | 1/2" | 2,000 | 4 1/2" | 2 1/4" | 4 1/2" | 8 7/8" | 1 1/4" | 1/2" | Steel | Steel | 0000000 | 000000 |
Rigid Carabiner | ||||||||||||
| C | 3/16" | 900 | 3 3/8" | 1 3/16" | 4" | 7 3/8" | 3/4" | 5/16" | Nylon Plastic | Aluminum | 0000000 | 000000 |
Double-Groove Without Bearing | ||||||||||||
Swivel Eye | ||||||||||||
| D | 5/16" | 1,100 | 1" | 1 31/32" | 1" | 3 3/4" | 1/2" | 1/4" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| D | 5/16" | 1,250 | 1 1/4" | 2 1/32" | 1 1/4" | 4 1/2" | 9/16" | 1/4" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| D | 7/16" | 1,850 | 2" | 2 29/64" | 2" | 5 1/2" | 3/4" | 5/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Easy-Open Hanging Pulleys for Wire Rope—For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing—a free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
For technical drawings and 3-D models, click on a part number.
| Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Hook Opening Wd. | Hook Thick. | Eye Dia. | Eye Thick. | Material | Housing Material | Each | |
Without Bearing | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Latching Hook | ||||||||||||||
| A | 3/8" | 4,400 | 3" | 1 1/2" | 3" | 9 3/4" | 1" | 3/4" | __ | __ | Steel | Steel | 0000000 | 0000000 |
| A | 1/2" | 8,800 | 4 1/2" | 2" | 4 1/4" | 14 1/8" | 1 3/16" | 1" | __ | __ | Steel | Steel | 0000000 | 000000 |
Swivel Shackle | ||||||||||||||
| B | 3/4" | 17,600 | 6" | 2 3/8" | 6" | 18 7/8" | __ | __ | 2 1/4" | 1 1/4" | Steel | Steel | 0000000 | 000000 |
Rigid Clevis | ||||||||||||||
| C | 3/8" | 4,000 | 3" | 1 7/16" | 3" | 4 7/8" | __ | __ | __ | __ | __ | Steel | 0000000 | 000000 |
| C | 1/2" | 8,000 | 4 1/4" | 2" | 4 1/4" | 7 3/4" | __ | __ | __ | __ | Steel | Steel | 0000000 | 000000 |
Rigid Eye | ||||||||||||||
| D | 1/8" | 975 | 1" | 7/16" | 1" | 2 5/8" | __ | __ | 3/8" | 1/8" | Nylon Plastic | Stainless Steel | 00000000 | 00000 |
| D | 1/4" | 1,850 | 1 3/4" | 1/2" | 1 3/4" | 3 1/4" | __ | __ | 3/8" | 3/16" | Nylon Plastic | Stainless Steel | 00000000 | 00000 |
Mounted Pulleys for Wire Rope—For Horizontal Pulling
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel is more corrosion resistant than steel.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | Housing Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Each | ||
Single-Groove Without Bearing | ||||||||||||||
| 1 | 1/4" | Not Rated | 2" | 1" | 3 1/4" | 2 1/2" | Steel | Steel | 2 | 1/4" | 2 1/4" | __ | 0000000 | 000000 |
| 1 | 3/8" | Not Rated | 3" | 1 5/32" | 4 3/4" | 3 1/2" | Steel | Steel | 2 | 1/4" | 3 5/8" | __ | 0000000 | 00000 |
| 2 | 3/16" | Not Rated | 2 1/2" | 1 3/32" | 3 3/4" | 2 3/4" | Steel | Steel | 4 | 3/16" | 3 3/16" | 7/16" | 0000000 | 00000 |
| 2 | 1/4" | Not Rated | 3 1/4" | 1 7/16" | 4 3/4" | 3 3/8" | Steel | Steel | 4 | 1/4" | 4 1/8" | 13/16" | 0000000 | 00000 |
| 2 | 3/8" | Not Rated | 4 1/2" | 1 5/8" | 6 5/16" | 4 3/4" | Steel | Steel | 4 | 1/4" | 5 1/2" | 13/16" | 0000000 | 00000 |
| 3 | 1/4" | Not Rated | 2" | 7/8" | 4 1/8" | 2 5/16" | Steel | Steel | 4 | 1/4" | 3 7/16" | 13/16" | 0000000 | 00000 |
| 3 | 3/8" | Not Rated | 3" | 1 1/8" | 5 9/16" | 3 11/32" | Steel | Steel | 4 | 1/4" | 4 3/4" | 1 1/16" | 0000000 | 00000 |
| 4 | 3/16" | Not Rated | 2 1/2" | 15/16" | 4" | 2 1/2" | Steel | Steel | 4 | 3/16" | 3 1/2" | 9/16" | 0000000 | 00000 |
| 4 | 1/4" | Not Rated | 3 1/4" | 1 1/16" | 5" | 3 1/4" | Steel | Steel | 4 | 3/16" | 4 3/8" | 13/16" | 0000000 | 00000 |
| 4 | 3/8" | Not Rated | 4 1/2" | 1 1/8" | 7" | 4 1/2" | Steel | Steel | 4 | 1/4" | 6 1/4" | 3/4" | 0000000 | 00000 |
Single-Groove With Bearing | ||||||||||||||
| 5 | 3/16" | 150 | 1 1/4" | 9/16" | 1 1/4" | 1 3/4" | Steel | Stainless Steel | 3 | 3/16" | __ | __ | 0000000 | 00000 |
Double-Groove Without Bearing | ||||||||||||||
| 6 | 3/16" | Not Rated | 2 1/2" | 1 7/16" | 3 3/4" | 2 3/4" | Steel | Steel | 4 | 3/16" | 3 1/4" | 7/8" | 0000000 | 00000 |
| 6 | 1/4" | Not Rated | 3 1/4" | 1 7/8" | 5" | 3 1/2" | Steel | Steel | 4 | 1/4" | 4 1/8" | 1 1/16" | 0000000 | 00000 |
| 7 | 1/4" | Not Rated | 3 1/4" | 1 7/8" | 5" | 3 1/4" | Steel | Steel | 4 | 3/16" | 4 7/16" | 3/4" | 0000000 | 00000 |
Mounted Pulleys for Wire Rope—For Lifting
Mount these pulleys to a flat surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as block and tackle systems. They can reduce the force needed to move the load by up to two times compared to single-groove pulleys.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant than steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Specifications Met | Each | |
Single-Groove Without Bearing | ||||||||||||||
| 1 | 3/16" | 600 | 2" | 5/8" | 2" | 2 3/8" | Steel | 4 | 3/16" | 1 7/16" | 11/16" | ASME B30.26 | 0000000 | 000000 |
| 1 | 1/4" | 800 | 3" | 5/8" | 3" | 3 9/16" | Steel | 4 | 3/16" | 1 7/16" | 11/16" | ASME B30.26 | 0000000 | 00000 |
| 1 | 5/16" | 1,550 | 3 1/2" | 1" | 3 1/2" | 4 3/8" | Steel | 4 | 1/4" | 2 5/8" | 1" | ASME B30.26 | 0000000 | 00000 |
| 1 | 3/8" | 1,550 | 3 1/2" | 1" | 3 1/2" | 4 3/8" | Steel | 4 | 1/4" | 2 5/8" | 1" | ASME B30.26 | 000000 | 00000 |
Single-Groove With Bearing | ||||||||||||||
| 2 | 1/4" | 3,500 | 4 1/4" | 5 1/4" | 4 1/4" | 4 1/2" | Stainless Steel | 4 | 3/8" | 2 3/8" | 3 7/16" | ASME B30.26 | 0000000 | 000000 |
| 2 | 1/4" | 3,500 | 4 1/4" | 5 1/4" | 4 1/4" | 4 1/2" | Steel | 4 | 3/8" | 2 3/8" | 3 7/16" | ASME B30.26 | 00000000 | 000000 |
| 2 | 3/8" | 7,000 | 6" | 6 3/4" | 6" | 6 1/2" | Steel | 4 | 1/2" | 3 1/4" | 4 13/16" | ASME B30.26 | 00000000 | 000000 |
| 2 | 1/2" | 10,500 | 8" | 8 7/8" | 8" | 8 3/8" | Steel | 4 | 11/16" | 4 1/2" | 5 15/16" | ASME B30.26 | 00000000 | 000000 |
| 3 | 1/4" | 3,500 | 4 1/4" | 4 23/32" | 5 5/16" | 6 21/32" | Steel | 4 | 1/2" | 3 15/16" | 3 1/2" | ASME B30.26 | 0000000 | 000000 |
| 3 | 3/8" | 7,000 | 6" | 7 1/4" | 9 3/4" | 10 1/4" | Steel | 4 | 9/16" | 8 1/2" | 5 7/8" | ASME B30.26 | 0000000 | 000000 |
Double-Groove Without Bearing | ||||||||||||||
| 4 | 3/16" | 600 | 2" | 1 7/32" | 2" | 2 3/8" | Steel | 4 | 3/16" | 2" | 11/16" | ASME B30.26 | 0000000 | 00000 |
| 4 | 1/4" | 800 | 3" | 1 7/32" | 3" | 3 9/16" | Steel | 4 | 3/16" | 2" | 11/16" | ASME B30.26 | 0000000 | 00000 |
Hanging Pulleys for Wire Rope—For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Style E pulleys have bracket on the bottom that lets you tie off one end of your wire rope.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Hook Opening Wd. | Hook Thick. | Material | Specifications Met | Each | |
Single-Groove Without Bearing | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rigid Eye | ||||||||||||||
| A | 3/16" | 600 | 2" | 5/8" | 2" | 3 3/4" | 3/8" | 1/4" | __ | __ | Steel | ASME B30.26 | 0000000 | 000000 |
| A | 1/4" | 800 | 3" | 5/8" | 3" | 4 13/16" | 3/8" | 1/4" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
| A | 5/16" | 1,550 | 3 1/2" | 1" | 3 1/2" | 6 1/2" | 9/16" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
| A | 3/8" | 1,550 | 3 1/2" | 1" | 3 1/2" | 6 1/2" | 9/16" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
Rigid Shackle | ||||||||||||||
| B | 3/8" | 6,000 | 6" | 1 5/8" | 6" | 17 5/16" | 1 5/8" | 1" | __ | __ | Steel | ASME B30.26 | 0000000 | 000000 |
Swivel Eye | ||||||||||||||
| C | 3/16" | 600 | 2" | 5/8" | 2" | 4 1/4" | 5/8" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
| C | 1/4" | 800 | 3" | 5/8" | 3" | 5 5/8" | 7/8" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
| C | 5/16" | 1,550 | 3 1/2" | 1" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
| C | 3/8" | 1,550 | 3 1/2" | 1" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | __ | __ | Steel | ASME B30.26 | 00000000 | 00000 |
Swivel Latching Hook | ||||||||||||||
| D | 3/16" | 600 | 2" | 1/2" | 2" | 4 5/8" | __ | __ | 5/16" | 3/8" | Steel | ASME B30.26 | 0000000 | 00000 |
| D | 1/4" | 675 | 2 1/2" | 5/8" | 2 1/2" | 5 3/4" | __ | __ | 1/2" | 7/16" | Steel | ASME B30.26 | 0000000 | 00000 |
| D | 1/4" | 800 | 3" | 5/8" | 3" | 6 1/4" | __ | __ | 1/2" | 7/16" | Steel | ASME B30.26 | 0000000 | 00000 |
| D | 5/16" | 1,550 | 3 1/2" | 7/8" | 3 1/2" | 8 1/2" | __ | __ | 13/16" | 9/16" | Steel | ASME B30.26 | 0000000 | 00000 |
| D | 3/8" | 1,550 | 3 1/2" | 7/8" | 3 1/2" | 8 1/2" | __ | __ | 13/16" | 9/16" | Steel | ASME B30.26 | 0000000 | 00000 |
Single-Groove With Bearing | ||||||||||||||
Rigid Shackle | ||||||||||||||
| E | 3/8" | 10,000 | 4" | 3 7/8" | 4 1/2" | 7 3/4" | 1 1/4" | 15/16" | __ | __ | Steel | __ | 0000000 | 000000 |
| E | 1/2" | 13,000 | 6" | 4 5/8" | 6 1/2" | 10 1/2" | 1 1/2" | 1 1/8" | __ | __ | Steel | __ | 0000000 | 000000 |
Double-Groove Without Bearing | ||||||||||||||
Swivel Eye | ||||||||||||||
| F | 3/16" | 525 | 1 1/2" | 1 7/32" | 1 1/2" | 3 13/16" | 5/8" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
| F | 1/4" | 800 | 3" | 1 7/32" | 3" | 5 5/8" | 7/8" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
| F | 5/16" | 1,550 | 3 1/2" | 1 13/16" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 |
Easy-Open Hanging Pulleys for Wire Rope—For Lifting
Also known as snatch blocks, these pulleys open so it's easier to feed the rope through the housing—a free rope end is not needed.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Style C to keep rope secure.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Pulleys | Optional Latch Kits | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Hook Opening Wd. | Hook Thick. | Material | Specifications Met | Each | Each | ||
Single-Groove Without Bearing | ||||||||||||||||
Swivel Eye | ||||||||||||||||
| A | 3/16" | 600 | 2" | 5/8" | 2" | 4 1/4" | 5/8" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 000000 | 000000 | 00 |
| A | 1/4" | 675 | 2 1/2" | 5/8" | 2 1/2" | 5" | 7/8" | 7/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 | 000000 | 00 |
| A | 5/16" | 1,550 | 3 1/2" | 1" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 | 000000 | 00 |
| A | 3/8" | 1,550 | 3 1/2" | 1" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 | 000000 | 00 |
Swivel Shackle | ||||||||||||||||
| B | 1/2" | 8,800 | 4 1/2" | 1 7/8" | 4 1/2" | 13 1/8" | 1 3/16" | 11/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 000000 | 000000 | 00 |
| B | 3/4" | 17,600 | 6" | 2 3/8" | 6" | 18 7/8" | 2 1/4" | 1 7/32" | __ | __ | Steel | ASME B30.26 | 0000000 | 000000 | 000000 | 00 |
Swivel Hook | ||||||||||||||||
| C | 3/8" | 4,400 | 3" | 1 1/2" | 3" | 9 3/4" | __ | __ | 1" | 3/4" | Steel | ASME B30.26 | 0000000 | 000000 | 00000000 | 000000 |
| C | 1/2" | 8,800 | 4 1/2" | 2" | 4 1/2" | 15 1/8" | __ | __ | 1 3/16" | 1 5/16" | Steel | ASME B30.26 | 0000000 | 000000 | 00000000 | 00000 |
| C | 3/4" | 17,600 | 6" | 2 1/4" | 6" | 18 7/8" | __ | __ | 1 11/16" | 1 3/4" | Steel | ASME B30.26 | 0000000 | 000000 | 00000000 | 00000 |
| C | 7/8" | 26,400 | 6" | 2 5/16" | 6" | 19 3/4" | __ | __ | 2 1/4" | 1 5/8" | Steel | ASME B30.26 | 0000000 | 00000000 | 00000000 | 00000 |
Double-Groove Without Bearing | ||||||||||||||||
Swivel Eye | ||||||||||||||||
| D | 3/16" | 600 | 2" | 1 7/32" | 2" | 4 1/4" | 5/8" | 5/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 | 000000 | 00 |
| D | 5/16" | 1,550 | 3 1/2" | 1 19/32" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | __ | __ | Steel | ASME B30.26 | 0000000 | 00000 | 000000 | 00 |