Search Results
Cut Direction Cut Direction |
|---|
 |  |
| Right Hand | Left Hand |
Cut Type Cut Type |
|---|
 |  |
| Along-the- Length Turning | Chamfering |
 |  |
| Facing | External Profiling |
Insert Holding Method Insert Holding Method |
|---|
|
Clamp Reference Number Clamp Reference Number |
|---|
|
Turning Carbide Insert Holders
Pair these holders with an ANSI standard carbide insert (sold separately). When one edge of the insert dulls, rotate it to use another edge. Right-hand holders cut from right to left, left-hand holders cut from left to right, and neutral holders can cut in either direction.
M series holders are good general-purpose holders. They are best for roughing cuts but can also perform medium and finishing cuts.
D series holders have a wedge-style clamping system that provides an extremely rigid hold for reduced chatter and extended tool life. These holders are best for medium cuts but can also perform roughing and finishing operations.
Holders with an offset shank are good for reaching into tight corners and when working close to the chuck.
MWLN Holders with Offset Shank—For Along-the-Length Turning, Chamfering, and Facing
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | WNMG-431 WNMG-432 WNMG-433 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
| 1" | 1" | 6" | WNMG-431 WNMG-432 WNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 00000 |
Left Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | WNMG-431 WNMG-432 WNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 00000 |
| 1" | 1" | 6" | WNMG-431 WNMG-432 WNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 00000 |
Economy Inserts for MWLN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.65" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.65" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for MWLN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| WNMG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| WNMG-433 | 1/2" | 3/16" | 0.29" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| WNMG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| WNMG-433 | 1/2" | 3/16" | 0.29" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| WNMG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| WNMG-433 | 1/2" | 3/16" | 0.29" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| WNMG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| WNMG-433 | 1/2" | 3/16" | 0.29" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
DWLN Holders with Offset Shank—For Along-the-Length Turning and External Profiling
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Seats | Replacement Seat Screws | Replacement Slotted Pins | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 1" | 1" | 6" | WNMG-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Left Hand | |||||||||||||||
| 1" | 1" | 6" | WNMG-432 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 000 |
Economy Inserts for DWLN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.65" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
For Use On Steel, Stainless Steel | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.65" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
Inserts for DWLN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| WNMG-432 | 1/2" | 3/16" | 0.31" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |