Color Color |
---|
Container Type Container Type |
---|
![]() | ![]() |
Can | Jar |
![]() | ![]() |
Stick | Pen |
![]() | ![]() |
Tube | Cartridge |
![]() | ![]() |
Syringe | Bottle |
![]() | ![]() |
Aerosol Can | Mixer Cup |
![]() | ![]() |
Pail | Patch |
![]() | |
Roll |
For Use On For Use On |
---|
Type Type |
---|
|
Consistency Consistency |
---|
|
|
Formulation Formulation |
---|
|
Container Size Container Size |
---|
Begins to Harden Begins to Harden |
---|
|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
Reaches Full Strength Reaches Full Strength |
---|
|
|
|
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Clarity Clarity |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Paint and Protective Coatings
More
Wood Crack Fillers


Press these putty-like fillers into cracks in wood up to 1/8" wide. At full strength, they can be sanded, painted, and varnished.
Nitrocellulose fillers contain real wood fibers in a solvent base, so they look and act like wood.
Epoxy fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Crack Wd. | Size, fl. oz. | Net Weight, oz. | Type | Consistency | Lg. | Dia. | Begins to Harden, min. | Reaches Full Strength, hrs. | Approximate Coverage @ Thick. | Max. Thick. | Color | Finishing Method | For Use Outdoors | Each | |
Nitrocellulose Fillers | |||||||||||||||
1/8" | 4 | __ | Can | Putty | __ | __ | 1 | 2 | Not Rated | Not Rated | Natural Wood | Drill, Sand, Saw, Tap | Yes | 000000 | 00000 |
1/8" | 16 | __ | Can | Putty | __ | __ | 1 | 2 | Not Rated | Not Rated | Natural Wood | Drill, Sand, Saw, Tap | Yes | 000000 | 00000 |
Epoxy Fillers | |||||||||||||||
1/8" | __ | 2.9 | Stick | Putty | 7" | 7/8" | 15 | 2 | 65 sq. in. @ 1/4" | 1/4" | Natural Wood | Drill, Sand, Saw, Tap | Yes | 0000000 | 00000 |
Wood Surface Fillers

Fix damaged wood or build up and replace missing wood. These two-part fillers are nonshrinking and chemical resistant. At full strength, they can be sanded, painted, and varnished. The size listed is the combined total of the two parts.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Consistency | Begins to Harden, hrs. | Reaches Full Strength, hrs. | Mixing Required | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
12 fl. oz. | Jar | Putty | 1 | 8 | Yes | 1:1 | 85 sq. in. @ 1/4" | 3/4" | 0° to 200° | Tan | Drill, Sand, Saw, Tap | Yes | Wood | 000000 | 000000 |
2 pt. | Jar | Putty | 1 | 8 | Yes | 1:1 | 230 sq. in. @ 1/4" | 3/4" | 0° to 200° | White | Drill, Sand, Saw, Tap | Yes | Wood | 000000 | 00000 |
Surface Fillers





These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Devcon Aluminum Liquid, Devcon Aluminum Putty, and Devcon FasMetal™ 10 HVAC Repair form a nonrusting finish.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Pkg. Qty. | Pkg. | |
Loctite® Fixmaster Epoxy | |||||||||||||||
EA 445 | __ | 0.12 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
EA 445 | __ | 1 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
EA 9131 | __ | 0.12 oz. | Mixer Cup | 90 | 24 hrs. | Thick Liquid | 1.5:1 | 1 sq. in. @ 1/4" | -65° to 180° | White | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 00000 |
Each | |||||||||||||||
Loctite® Fixmaster Poxy Pak™ | |||||||||||||||
EA 9017 | 0.8 fl. oz. | __ | Syringe | 5 | 60 min. | Thick Liquid | 1:1 | Not Rated | -65° to 300° | Clear | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Concrete, Glass, Wood | __ | 0000000 | 00000 |
Devcon Aluminum Liquid | |||||||||||||||
10710 | __ | 1 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
10720 | __ | 3 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
Devcon Aluminum Putty | |||||||||||||||
10610 | __ | 1 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
10620 | __ | 3 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
Devcon FasMetal™ 10 HVAC Repair | |||||||||||||||
19770 | 6.5 fl. oz. | __ | Tube | 60 | 16 hrs. | Paste | 1:1 | 30 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 00000 |
Bondo Body Filler | |||||||||||||||
261 | 1 pt. | __ | Can, Tube | 3 | 60 min. | Paste | 50:1 | 90 sq. in. @ 1/4" | -40° to 180° | Gray | Sand | Aluminum, Steel, Concrete, Fiberglass, Wood | __ | 000000000 | 00000 |
262 | 1 qt. | __ | Can, Tube | 3 | 60 min. | Paste | 50:1 | 180 sq. in. @ 1/4" | -40° to 180° | Gray | Sand | Aluminum, Steel, Concrete, Fiberglass, Wood | __ | 000000000 | 00000 |
Replacement Hardener for Bondo Surface Fillers (0.8-fl. oz. Tube) | 000000000 | Each | 00000 |
Surface Filler Patches

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Mfr. Model No. | Lg. | Wd. | Begins to Harden, min. | Reaches Full Strength, hrs. | Mix Ratio | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Zip Patch™ | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
11500 | 4" | 9" | 5 | 4 | __ | Yes | -40° to 200° | Brown | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Ceramic, Wood | 0000000 | 0000000 |
Surface Fillers | ||||||||||||
__ | 2" | 12" | 1 | 24 | 1:1 | Yes | -85° to 220° | Red | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
__ | 2" | 20" | 1 | 24 | 1:1 | Yes | -85° to 220° | Amber | Machine, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
__ | 4" | 6" | 1 | 24 | 1:1 | Yes | -85° to 220° | Blue | Machine, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
__ | 4" | 12" | 1 | 24 | 1:1 | Yes | -85° to 220° | Green | Machine, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood | 00000000 | 00000 |
Aerosol Surface Fillers

Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.
Container Net Weight, oz. | Begins to Harden, min. | Reaches Full Strength, hrs. | Approximate Coverage @ Thickness | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
11 | 10 | 24 | 9 sq. ft. @ 2 mil | Yes | 50° to 90° | Gray | Sand | Aluminum, Brass, Bronze, Copper, Galvanized Iron, Galvanized Steel, Iron, Steel, Stainless Steel, Silver, Titanium, Fiberglass, Wood | 000000 | 000000 |
Light-Activated Surface Fillers


Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
Epoxy fillers provide better adhesion and more corrosion resistance than polyester fillers.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Formulation | Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, min. | Consistency | For Max. Crack Wd. | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Polyester | 3.5 | Tube | 1 | 3 | Putty | 1" | 24 sq. in. @ 1/4" | 1/2" | Yes | -40° to 220° | White | Drill, Sand, Tap | Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | 00000000 | 000000 |
Epoxy | 3.5 | Bottle | 1 | 5 | Putty | 1" | 24 sq. in. @ 1/4" | 1/2" | Yes | -40° to 270° | Amber | Drill, Sand, Tap | Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | 00000000 | 00000 |
Water-Resistant Surface Fillers






Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.
Paste fillers resist alkalies, solvents, gasoline, and oil.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Net Weight, oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Underwater Repair Epoxy | |||||||||||||||
EA 9490 | __ | 4 | Stick | 15 | 60 min. | Putty | __ | 16 sq. in. @ 1/4" | 1/4" | Not Rated to 300° | White | Machine, Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Concrete, Wood | 0000000 | 000000 |
Surface Fillers | |||||||||||||||
__ | 2 | __ | Tube | 5 | 24 hrs. | Paste | 1:1 | 12 sq. in. @ 1/4" | 1/2" | Not Rated to 200° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
__ | 2 | __ | Jar, Bottle | 20 | 60 min. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
__ | 2 | __ | Jar, Bottle | 20 | 60 min. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
__ | 12 | __ | Jar | 30 | 24 hrs. | Paste | 1:1 | 85 sq. in. @ 1/4" | 1" | 50° to 210° | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | 0000000 | 00000 |
__ | 14 | __ | Can, Jar | 20 | 60 min. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
__ | 14 | __ | Can, Jar | 20 | 60 min. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
__ | 24 | __ | Can | 30 | 24 hrs. | Paste | 1:1 | 170 sq. in. @ 1/4" | 1" | 50° to 210° | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | 0000000 | 00000 |
__ | 48 | __ | Can | 30 | 24 hrs. | Paste | 1:1 | 340 sq. in. @ 1/4" | 1" | 50° to 210° | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | 0000000 | 00000 |
Water-Resistant Surface Filler Kits
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

Includes | Formulation | Consistency | For Use Outdoors | Temp. Range, °F | Finishing Method | For Use On | Each | |
8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler 0.1-oz. 406 Collodial Silica Filler 0.1-oz. 410 Low-Density Filler Two Brushes Reusable Mixing Stick Three Mixing Cups 15" × 15" Fiberglass Cloth Syringe Dispenser Three Pairs of Disposable Gloves | Epoxy | Thin Liquid | Yes | 35° to 130° | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, ABS Plastic, PVC Plastic, Fiberglass, Wood | 0000000 | 000000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Component | No. of Pieces | Mfr. Model No. | Size | Type | Lg. | Wd. | Each | |
Two-Part Epoxy | 6 | 101-TS | 0.6 fl. oz. | One-Time-Use Packet | __ | __ | 0000000 | 000000 |
Resin | 1 | 105 | 1 qt. | Can | __ | __ | 0000000 | 00000 |
Fast Hardener | 1 | 205 | 7 fl. oz. | Can | __ | __ | 0000000 | 00000 |
Slow Hardener | 1 | 206 | 7 fl. oz. | Can | __ | __ | 0000000 | 00000 |
Colloidal Silica Filler | 1 | 406 | 1.7 fl. oz. | Canister | __ | __ | 0000000 | 00000 |
Colloidal Silica Filler | 1 | 406 | 5.5 fl. oz. | Canister | __ | __ | 0000000 | 00000 |
Low-Density Filler | 1 | 410 | 5 fl. oz. | Canister | __ | __ | 0000000 | 00000 |
Mini Dispensing Pump | 3 | 300 | __ | __ | __ | __ | 0000000 | 00000 |
Fiberglass Cloth | 1 | 745 | __ | __ | 30" | 30" | 0000000 | 00000 |
Heavy Duty Roof Patching Compounds

These patching compounds are the most flexible and watertight we offer. Developed for use on flashing, chimneys, and high-stress areas, they are highly vibration resistant.
Dispense compounds in a cartridge in a standard caulk gun (sold separately).
Compounds that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container Size | Consistency | Begins to Harden, hrs. | Reaches Full Strength | Approximate Coverage @ Thick. | Max. Thick. | Application Temp. Range, °F | Color | For Use Outdoors | For Use On | Cannot Be Sold To | Each | |
Cans | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 gal. | Paste | 2 | 7 days | 8 sq. ft. @ 1/4" | 1/8" | 20° to 100° | Black | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 0000000 | 000000 |
Cartridges | ||||||||||||
10.1 fl. oz. | Gel | 4 | 48 hrs. | 1/2 sq. ft. @ 1/4" | 1/2" | 50° to 120° | Black | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | __ | 0000000 | 00000 |
Roof Patching Compounds


Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
Apply acrylic compounds to dry surfaces. Apply asphalt compounds to wet or dry surfaces.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Consistency | Begins to Harden | Reaches Full Strength | Approximate Coverage @ Thick. | Max. Thick. | Application Temp. Range, °F | Color | Specifications Met | For Use Outdoors | For Use On | Each | |
Acrylic Compounds | |||||||||||||
1 | Can | Thick Liquid | 4 hrs. | 24 hrs. | 12 sq. ft. @ 1/8" | 1/4" | 50° to 90° | White | __ | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 00000000 | 000000 |
Asphalt Compounds | |||||||||||||
1 | Can | Thick Liquid | 60 min. | 30 days | 12 sq. ft. @ 1/8" | 1/2" | 50° to 120° | Black | ASTM D4586 | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 00000 |
4.7 | Pail | Thick Liquid | 60 min. | 30 days | 56 sq. ft. @ 1/8" | 1/2" | 50° to 120° | Black | ASTM D4586 | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 00000 |
Adhesive-Back Roof Repair Rolls

Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls. Backing is rubberized asphalt adhesive. Roll can be cut to size. Use primer (sold separately) for optimal adhesion.
Aluminum | White | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Wd. | Thick. | Material | Backing Material | Mixing Required | Application Temp. Range, °F | For Use On | Each | Each | ||
33 1/2 | 4" | 3/64" | Aluminum | Asphalt | No | 55° to 100° | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 000000 | 000000 | 000000 |
33 1/2 | 6" | 3/64" | Aluminum | Asphalt | No | 55° to 100° | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 00000 | 000000 | 00000 |
33 1/2 | 36" | 3/64" | Aluminum | Asphalt | No | 55° to 100° | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 000000 | 000000 | 000000 |
Primer (17 oz. Aerosol Can, Approximate Coverage of 35 sq. ft.) | 0000000 | Each | 000000 |
Temporary Roof Leak Patching Compounds

Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Crack Wd. | Net Weight, lbs. | Type | Consistency | Contains Aggregate | Approximate Coverage @ Thick. | Application Temp. Range, °F | Color | For Use Outdoors | For Use On | Each | |
1" | 25 | Pail | Powder | Yes | 40 sq. ft. @ 1/2" | 35° to 100° | Gray | Yes | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 0000000 | 000000 |
Roof Crack Fillers

Fill cracks with these coatings to stop leaks and deaden sound. They resist rust, salt, and acid. Coatings that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Crack Wd. | Net Weight, oz. | Type | Consistency | Begins to Harden, min. | Reaches Full Strength, hrs. | Approximate Coverage @ Thick. | Max. Thick. | Application Temp. Range, °F | Color | For Use Outdoors | For Use On | 1-11 | 12-Up | |
1/8" | 18 | Aerosol Can | Thin Liquid | 15 | 6 | 15 sq. ft. @ 1 1/2 mil | 1/16" | 50° to 100° | Black | Yes | Steel, Iron, Wood | 0000000 | 000000 | 000000 |
Roof Repair Mesh Fabric

Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.
Lg., ft. | Wd. | Material | For Use Outdoors | Application Temp. Range, °F | Color | Specifications Met | For Use On | Each | |
150 | 6" | Asphalt-Coated Fiberglass Fabric | Yes | Not Rated° | Black | ASTM D1668 Type I | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 000000 |
150 | 36" | Asphalt-Coated Fiberglass Fabric | Yes | Not Rated° | Black | ASTM D1668 Type I | Aluminum, Copper, Steel, Stainless Steel, Masonry, Stone, Asphalt, Wood | 000000 | 000000 |
Light-Activated Surface Filler Pens for Plastic
These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure. Surface fillers work with most kinds of plastic, as well as wood, particleboard, and medium density fiberboard (MDF).

Formulation | Container Size, fl. oz. | Begins to Harden, sec. | Reaches Full Strength, sec. | Consistency | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Batteries Included | Each | |
Acrylic | 0.2 | 3 | 15 | Gel | Yes | 0° to 245° | Clear | Drill, Sand | Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PVDF Plastic, Vinyl Plastic, Fiberglass, Wood | Yes | 0000000 | 000000 |
Spackling Compounds

Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Crack Wd. | Size | Type | Consistency | Approximate Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
1/4" | 8 fl. oz. | Jar | Paste | Not Rated | 0° to 150° | White | Sand | No | Drywall, Plaster, Wood | 0000000 | 00000 |
1/4" | 1 qt. | Jar | Paste | Not Rated | 0° to 150° | White | Sand | No | Drywall, Plaster, Wood | 0000000 | 0000 |
Drywall Crack Fillers

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Crack Wd. | Size, pt. | Type | Consistency | Begins to Harden, min. | Reaches Full Strength, hrs. | Approximate Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
1/8" | 1 | Jar | Paste | 5 | 2 | 20 ft. @ 8 mil | 8 mil | 50° to 120° | White | Sand | Yes | Drywall, Plaster, Concrete, Wood | 000000 | 000000 |
Ceiling Texture Compounds

Spray these compounds onto ceilings to create a popcorn texture that covers stains, patches, and chips. The nozzle is upright for easy application.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Consistency | Begins to Harden, min. | Reaches Full Strength, hrs. | Approximate Coverage, sq. ft. | Temp. Range, °F | Texture | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
14 | Aerosol Can | Thin Liquid | 60 | 24 | 4 | 40° to 90° | Popcorn | White | Drill, Sand, Saw, Tap | No | Drywall, Wood | 0000000 | 000000 |
Wood Stain Pens

Touch-up nicks and scratches on wood.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Composition | Touch, min. | O'all, hrs. | Stroke Wd. | Max. Temp., °F | For Use Outdoors | For Use On | Choose a Color | Each | |
0.3 | Solvent Based | 30 | 3 | 3/16" | 120° | No | Wood | 000000 | 00000 |
Wood Stain

Stain and seal in one application to protect and refresh the appearance of wood surfaces. This stain is formulated to penetrate wood evenly to create a uniform tone without streaks or dark spots. It can be used on surfaces that have already been painted or varnished without stripping the existing layer. Brush onto wood, faux wood, and medium density fiberboard (MDF).