28 mm Wrenches | McMaster-Carr

Your go-to wrenches for routine maintenance. With two different ends, you need fewer tools to tighten and loosen nuts and bolts. The open end slides onto the side of fasteners for adjustments in tight spots. When nuts and bolts won't budge, the box end fully encircles them to apply maximum torque. Drop forged for added strength, these wrenches will be part of your toolbox for life.

12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.

Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.

Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End		Open End
	Drive Size, mm	Overall Lg.	Head Offset Angle	Head Thick.	Opening Angle	Head Thick.	Appearance	Specs. Met		Each
12-Point Opening







				Chrome-Plated Steel

				28	14 7/8"	15°	41/64"	15°	21/32"	Polished	ASME B107.100	5314A96	000000


				28	15 1/4"	15°	11/16"	15°	35/64"	Dull	ASME B107.100	7191A34	00000

Double Open-End Wrenches

Round

Opening

Switch between two different-sized fasteners without swapping out your wrenches. The two heads save you time, while reducing the number of tools you need to keep on hand. Drop forged for added strength, these wrenches will be part of your toolbox for life.

Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.

Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.

	Head Thickness	Appearance		Each
Round Opening







	Chrome-Plated Steel

	25 mm × 28 mm	11 1/4"	15°	21/64"	Dull	5420A28	000000

Double Open-End Wrench Sets


Plastic Roll-Up Pouch

Round

Opening

Keep a range of sizes on hand to switch between two different-sized fasteners without swapping out your wrenches. The two heads save you time and reduce the number of tools you need to keep on hand. Drop forged for added strength, these wrenches will be part of your toolbox for life.

Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.

Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.

	Opening Angle	Appearance	Container Type		Each
Round Opening







	Chrome-Plated Steel

	12	6 mm × 7 mm 8 mm × 9 mm 10 mm × 11 mm 12 mm × 13 mm 14 mm × 15 mm 16 mm × 17 mm 18 mm × 19 mm 20 mm × 22 mm 21 mm × 23 mm 24 mm × 26 mm 25 mm × 28 mm 27 mm × 30 mm	4 1/2" to 11 7/8"	15°	Dull	Plastic Roll-Up Pouch	5420A51	0000000

Ratcheting Combination Wrenches

12-Point

Opening

Turn nuts and bolts without having to remove and reposition these wrenches. They're commonly used where you don't have enough space for full turns. To switch between loosening and tightening, flip them over.

Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.

			Box End			Open End
	Drive Size, mm	Overall Lg.	Head Offset Angle	Head Thick.	Number of Teeth	Opening Angle	Head Thick.	Appearance		Each
12-Point Opening







				Chrome-Plated Steel

				28	14 1/4"	15°	1/2"	72	10°	1/2"	Polished	5163A47	000000

Universal-Fit Sockets

Turn multiple shapes and sizes of fasteners with a single socket. Use these on hex, square, and other external-drive fasteners—even wing nuts. Place the socket over the nut or screw head and the 54 pins move to grip it securely. For use with hand-drive tools only.

Sockets


	Universal Socket

	Overall Lg.	OD	Material	Socket Shape		Each
1/2" Square Drive



	7/16"-1 1/4", 11 mm-32 mm	3 1/2"	1 11/16"	Chrome-Plated Steel	Universal	6021A111	000000

Wrench Heads


Wrench and Socket Extension Not Included

Reach nuts obstructed by a fluid line or other barrier with these wrench heads. Connect them to your socket extension and ratchet wrench to turn fasteners where clearance is limited from both the top and side. You can also attach one directly to your ratchet wrench to convert it into an open-ended ratcheting wrench. Also known as crowfoot wrenches.

	Overall Lg.	Thk.	Ctr.-to-Ctr. Lg.	Material	Wrench Opening Shape		Each
1/2" Square Drive



	28	3"	3/8"	1 13/16"	Chrome-Plated Steel	Round	1882N49	000000

12-Point Socket Sets

These tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish. The 12-point shape quickly positions on hex fasteners.

Sockets—Chrome-Plated Steel


	12-Point Socket

	Components Included	Includes	Container Type	Socket Shape	Drive Size, mm		Each
1/2" Square Drive



	23	23 Sockets	Deep: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm Deep (cont.): 26 mm, 27 mm, 28 mm, 29 mm, 30 mm, 31 mm, 32 mm	Metal Clip Rail	12-Point	10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32	7874N105	0000000


	24	24 Sockets	Standard: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm Standard (cont.): 24 mm, 25 mm, 26 mm, 27 mm, 28 mm, 29 mm, 30 mm, 31 mm, 32 mm, 36 mm	Metal Clip Rail	12-Point	10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 36	7874N104	000000

Socket Organizers

		Each
Foam Socket Organizer for 22 Piece 3/4" Square Drive Size Set	5243A22	0000000

Sockets with Drive Tools—Chrome-Plated Steel


	12-Point Socket

	Components Included	Includes	Container Type	Socket Shape	Drive Size, mm		Each
3/4" Square Drive



	30	24 Sockets 2 Drive Tools 3 Extensions Universal Joint	Standard: 19 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm, 26 mm, 27 mm, 28 mm, 29 mm, 30 mm, 31 mm, 32 mm, 35 mm; 36 mm, 38 mm, 41 mm Standard (cont.): 42 mm, 46 mm, 50 mm, 54 mm, 55 mm, 58 mm, 60 mm 17 1/2" Long Sliding-Head Wrench Handle 24" Long Ratchet Wrench 3 1/2" Long Extension 8" Long Extension, 16" Long Extension	Metal Case	12-Point	19, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 35, 36, 38, 41, 42, 46, 50, 54, 55, 58, 60	7874N112	000000000

Socket Organizers

		Each
Foam Socket Organizer for 22 Piece 3/4" Square Drive Size Set	5243A22	0000000

6-Point Sockets

The hex shape achieves the best possible grip on hex fasteners to prevent rounding their points. For use with hand-drive tools only.

Chrome-Plated Steel


Standard Clearance	Deep Clearance	6-Point Socket

						Standard Clearance			Deep Clearance
	Drive Size, mm	OD	Specs. Met	Socket Shape	For Drive Style	Overall Lg.		Each	Overall Lg.		Each
1/2" Square Drive



		28	1 31/64"	ASME B107.110, SAE AS955	6-Point	External Hex	1 13/16"	7149A86	000000	—	———	0


		28	1 1/2"	ASME B107.110	6-Point	External Hex	—	———	0	3"	7149A269	000000

Economy 6-Point Socket Sets

Suitable for occasional maintenance work, these sets are imported. The hex shape grips hex fasteners and prevents rounding.

Sockets—Chrome-Plated Steel


Metal Clip Rail	6-Point Socket

	Components Included	Includes	Container Type	Socket Shape	Drive Size, mm		Each
1/2" Square Drive



	24	24 Sockets	Standard: 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm Standard (cont.): 26 mm, 27 mm, 28 mm, 29 mm, 30 mm, 32 mm, 36 mm	Metal Clip Rail	6-Point	9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 36	5894A208	0000000


	24	24 Sockets	Deep: 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm Deep (cont.): 26 mm, 27 mm, 28 mm, 29 mm, 30 mm, 32 mm, 36 mm	Metal Clip Rail	6-Point	9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 36	5894A207	000000

12-Point Sockets

The 12-point shape quickly positions on hex fasteners. These sockets are for hand-driven use only.

Chrome-Plated Steel


Standard Clearance	Deep Clearance	12-Point Socket

					Standard Clearance			Deep Clearance
	Drive Size, mm	OD	Socket Shape	For Drive Style	Overall Lg.		Each	Overall Lg.		Each
1/2" Square Drive



		28	1 31/64"	12-Point	External 12-Point, External Hex	1 13/16"	7149A31	000000	3 1/4"	7149A91	000000


		3/4" Square Drive



				28	1 39/64"	12-Point	External 12-Point, External Hex	2 1/8"	7312A31	00000	—	———	0

6-Point Impact Socket Sets

6-Point

Socket

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

	Components Included	Includes	Container Type	Socket Shape		Each
1/2" Square Drive—Black-Oxide Steel



	25	25 Sockets	Standard: 8 mm; 9 mm; 10 mm; 11 mm; 12 mm; 13 mm; 14 mm; 15 mm; 16 mm; 17 mm; 18 mm; 19 mm; 20 mm; 21 mm; 22 mm; 23 mm; 24 mm Standard (cont.): 25 mm, 26 mm, 27 mm, 28 mm, 29 mm, 30 mm, 32 mm, 36 mm	Metal Clip Rail	6-Point	53105A101	0000000


	25	25 Sockets	Deep: 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm Deep (cont.): 26 mm, 27 mm, 28 mm, 29 mm, 30 mm, 32 mm, 36 mm	Metal Clip Rail	6-Point	53105A102	000000

Spanner Sockets


Socket Shown With Wrench (Sold Separately)

4-Pin

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts. These sockets require less clearance around bearings than standard hook spanner wrenches, so they’re good in tight spaces. Use them with a square-drive wrench handle or a ratchet wrench; they’re not for use with impact wrenches.

								Clearance Dp., mm
	Drive Size, mm	Overall Lg., mm	OD, mm	For Nut Size	For Nut Thread Size	For Bearing Nut Specs. Met	For Nut Dia., mm	Nut	Bolt	Material		Each
4-Pin Socket







				3/8" Square Drive

				28	76	38	—	M17	ISO 2982-2	28	—	54	Steel	5510N147	0000000




						1/2" Square Drive

						28	82	36	M12 M17	—	DIN 1804 DIN 981, ISO 2982	28	7	59	Steel	5510N178	000000

6-Point Impact Sockets

Achieve the best possible grip on hex fasteners and prevent rounding. These sockets are made to withstand the high torque and force of impact tools.

Standard Clearance


		6-Point Socket

3/4" Square Drive and 1" Square Drive—_3/4", 1", and 1 _1/2" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.

	Sockets									Retaining Rings
		Clearance Dp.
	Drive Size, mm	Nut	Bolt	Compatible Retaining Ring ID	Material	Overall Lg.	Socket Shape		Each		Each
1/2" Square Drive



		28	1 1/32"	1 11/32"	—	Black-Oxide Steel	2"	6-Point	7205A32	000000	———	0


		3/4" Square Drive



				28	45/64"	1 1/8"	1 7/16"	Black-Oxide Steel	2 1/16"	6-Point	54175A66	00000	5552A36	00000


				1" Square Drive



						28	41/64"	1 21/32"	1 3/4"	Black-Oxide Steel	2 9/16"	6-Point	54155A975	00000	5550A68	0000

Deep Clearance


		6-Point Socket

1" Square Drive—_3/4", 1", and 1 _1/2" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.

	Sockets									Retaining Rings
		Clearance Dp.
	Drive Size, mm	Nut	Bolt	Compatible Retaining Ring ID	Material	Overall Lg.	Socket Shape		Each		Each
1/2" Square Drive



		28	1 13/32"	2 27/32"	—	Black-Oxide Steel	3 1/2"	6-Point	7205A74	000000	———	0


		1" Square Drive



				28	41/64"	2 3/4"	1 3/4"	Black-Oxide Steel	4"	6-Point	54155A46	00000	5550A68	00000