The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Nickel-plated brass fittings provide better corrosion resistance than unplated brass fittings.

For technical drawings and 3-D models, click on a part number.

Plated with nickel, these brass fittings resist rust better than steel and unfinished brass fittings. Select them when you need more strength in corrosive environments to handle higher pressures than our low-pressure fittings.

For technical drawings and 3-D models, click on a part number.

Make lightweight connections without the hassle of matching the exact thread type—these fittings connect to NPT, NPTF, BSPP, BSPT, and other universal threads. With a nylon body and nickel-plated brass threads, these fittings are lighter than most metal fittings, and withstand corrosion better than plain brass threads. They also have a reusable gasket to guard against leaks. Connect the tube ends to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect them, push the release ring and pull the tubing out of the fitting. These fittings are sometimes known as instant fittings. All meet ISO 14743, which is an international standard for push-to-connect fittings for plastic tubing.

For technical drawings and 3-D models, click on a part number.

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting. They have good corrosion resistance.

Nickel-plated brass fittings have better corrosion resistance than unfinished brass fittings.

Fittings with thread sealant offer extra protection against leaks.

For technical drawings and 3-D models, click on a part number.

The threads on these fittings mate with NPT, NPTF (Dryseal), BSPT, and BSPP threads. The male threads have a gasket to protect against leaks. Fittings are moisture and corrosion resistant, so they’re good for water and humid air applications. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting.

For technical drawings and 3-D models, click on a part number.

Install these strainers prior to valves, pumps, and nozzles to catch debris in your pipeline and protect sensitive equipment. They are designed for low-pressure applications. Strainers have a threaded drain with a plug that provides access to the screen without disconnecting your line. They are bronze for good corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Strainers catch debris in your pipeline, preventing damage to valves, pumps, nozzles, and other sensitive equipment. They are designed for medium-pressure applications. Strainers have a threaded drain with a plug that provides access to the screen without disconnecting your line. They have good corrosion resistance.

Strainers for use with drinking water meet NSF/ANSI 61 safety standards for drinking water systems.

For technical drawings and 3-D models, click on a part number.

PVC construction is lightweight and provides excellent corrosion resistance. Install them prior to valves, pumps, and nozzles to catch debris in your pipeline and protect sensitive equipment. Strainers have a threaded drain with a hex cap or plug that provides access to the screen without disconnecting your line.

Clear strainers allow you to monitor debris collecting in the screen.

Strainers with socket-connect pipe connections attach to unthreaded pipe with cement for a permanent, leak-tight connection.

Strainers with two union end connections come with two socket-connect pipe connections and two threaded pipe connections; union end connections allow for easy access to your pipeline.

For technical drawings and 3-D models, click on a part number.

Made of CPVC, these lightweight strainers have excellent corrosion resistance and withstand higher temperatures than all of our other plastic Y-strainers. They trap debris in your pipeline before it can enter sensitive equipment such as valves, pumps, and nozzles. Strainers have a threaded drain with a hex cap that provides access to the screen without disconnecting your line.

Strainers with socket-connect pipe connections attach to unthreaded pipe with cement for a permanent, leak-tight connection.

For technical drawings and 3-D models, click on a part number.

These irrigation polypropylene strainers have excellent corrosion resistance and are lightweight. Install them in your pipeline to trap debris and prevent damage to valves, pumps, nozzles, and other sensitive equipment. They have a threaded drain with a plug that provides access to the screen without disconnecting your line.

For technical drawings and 3-D models, click on a part number.

316 stainless steel gives these strainers excellent corrosion resistance. Use them in medium-pressure applications to capture debris in your pipeline and protect sensitive equipment. Strainers have a threaded drain with a plug that provides access to the screen without disconnecting your line.

For technical drawings and 3-D models, click on a part number.

A rugged iron body provides excellent strength and durability. Strainers prevent damage to valves, pumps, nozzles, and other sensitive equipment by catching debris in your pipeline. They are designed for low-pressure applications. Strainers are for use in noncorrosive environments. They have a threaded drain with a plug that provides access to the screen without disconnecting your line.

For technical drawings and 3-D models, click on a part number.

Made of rugged iron or steel, these strainers provide excellent strength and durability. Install them prior to valves, pumps, and nozzles to protect sensitive equipment from damage caused by debris. They are designed for medium-pressure applications. Strainers are for use in noncorrosive environments. They have a threaded drain with a plug that provides access to the screen without disconnecting your line.

For technical drawings and 3-D models, click on a part number.

With a higher temperature rating than other strainers, these can handle applications reaching 800° F. Install them prior to valves, pumps, and nozzles to catch debris in your pipeline and protect sensitive equipment. Strainers are designed for high-pressure applications. They are steel for excellent strength and durability. Strainers are for use in noncorrosive environments. They have a threaded drain with a plug that provides access to the screen without disconnecting your line.

For technical drawings and 3-D models, click on a part number.

Visually inspect flow and debris accumulation through the transparent valve body. Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. These valves open to allow flow in one direction and close when flow stops or reverses. They have a removable cap that provides easy access to internal components for maintenance.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

To achieve the maximum possible flow, internal components are designed to reduce flow resistance. These valves open to allow flow in one direction and close when flow stops or reverses. A removable cap provides easy access to internal components for maintenance.

Repair kits include everything you need to rebuild the valve.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Visually inspect flow and debris accumulation through the transparent valve body. Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. Valves have a PVC body and a fluoroelastomer seal for excellent chemical resistance. They open to allow flow in one direction and close when flow stops or reverses. All have a removable cap that provides easy access to internal components for maintenance.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.