Filter by
Cross Section Shape
Width
Material
Hardness
Hardness Rating
For Use With
Color
Minimum Temperature
Performance
RoHS
Maximum Temperature
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Specifications Met
X-Profile Oil-Resistant Buna-N Cord Stock
 |
Made of Buna-N, this cord stock resists grease, hydraulic oil, and motor oil, plus mild chemicals and water. It has four points of contact with surfaces, so it’s less likely to roll or twist in moving parts than round- or square-profile cord stock. When it’s compressed, it flattens into a double-layered seal that holds up to pressure in any direction. Also known as quad seal or double seal cord stock, it’s often used to line vacuum chambers and painting areas.
Per Ft. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Wd. Tolerance Range | Hardness | ARPM Tolerance | Specs. Met | Temp. Range, ° F | Color | Choose a Length, ft. | 1-99 | 100-Up | ||
| 0.070" | -0.014" to 0.014" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T15 | 00000 | 00000 | |
| 0.094" | -0.014" to 0.014" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T16 | 0000 | 0000 | |
| 0.103" | -0.016" to 0.016" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T17 | 0000 | 0000 | |
| 0.125" | -0.016" to 0.016" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T18 | 0000 | 0000 | |
| 0.139" | -0.016" to 0.016" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T19 | 0000 | 0000 | |
| 0.188" | -0.020" to 0.020" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T21 | 0000 | 0000 | |
| 0.210" | -0.020" to 0.020" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T22 | 0000 | 0000 | |
| 0.250" | -0.020" to 0.020" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T23 | 0000 | 0000 | |
| 0.275" | -0.027" to 0.027" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T24 | 0000 | 0000 | |
| 0.313" | -0.027" to 0.027" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T25 | 0000 | 0000 | |
| 0.375" | -0.027" to 0.027" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T26 | 0000 | 0000 | |
| 0.437" | -0.031" to 0.031" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T27 | 0000 | 0000 | |
| 0.500" | -0.031" to 0.031" | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1034T28 | 0000 | 0000 | |
| 1.500 mm | -0.250 mm to 0.250 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N11 | 0000 | 0000 | |
| 2.000 mm | -0.350 mm to 0.350 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N12 | 0000 | 0000 | |
| 2.500 mm | -0.350 mm to 0.350 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N14 | 0000 | 0000 | |
| 3.000 mm | -0.400 mm to 0.400 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N15 | 0000 | 0000 | |
| 3.500 mm | -0.400 mm to 0.400 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N16 | 0000 | 0000 | |
| 4.000 mm | -0.400 mm to 0.400 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N17 | 0000 | 0000 | |
| 4.500 mm | -0.500 mm to 0.500 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N18 | 0000 | 0000 | |
| 5.000 mm | -0.500 mm to 0.500 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N19 | 0000 | 0000 | |
| 5.500 mm | -0.500 mm to 0.500 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N21 | 0000 | 0000 | |
| 6.000 mm | -0.500 mm to 0.500 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N22 | 0000 | 0000 | |
| 6.500 mm | -0.700 mm to 0.700 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N23 | 0000 | 0000 | |
| 7.000 mm | -0.700 mm to 0.700 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N24 | 0000 | 0000 | |
| 8.000 mm | -0.700 mm to 0.700 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N25 | 0000 | 0000 | |
| 9.000 mm | -0.700 mm to 0.700 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N26 | 0000 | 0000 | |
| 10.000 mm | -0.700 mm to 0.700 mm | Durometer 70A (Medium) | E2 Precision | ASTM D2000 | -25 to 212 | Black | 3, 10, 20, 50, 100 | 1207N27 | 0000 | 0000 | |
X-Profile Chemical-Resistant Viton® Fluoroelastomer Cord Stock
|
Made of Viton® fluoroelastomer, this cord stock resists a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. It has four points of contact with surfaces, so it’s less likely to roll or twist in moving parts than round- or square-profile cord stock. When this cord stock is compressed, it flattens into a double-layered seal that holds up to pressure in any direction. It also withstands vibration and heavy wear, so it’s often used in chemical mixers.
Per Ft. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Wd. Tolerance Range | Hardness | ARPM Tolerance | Specs. Met | Temp. Range, ° F | Color | Choose a Length, ft. | 1-99 | 100-Up | ||
| 0.070" | -0.005" to 0.005" | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1205N21 | 00000 | 00000 | |
| 0.094" | -0.005" to 0.005" | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1205N22 | 0000 | 0000 | |
| 0.103" | -0.005" to 0.005" | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1205N23 | 0000 | 0000 | |
| 0.125" | -0.008" to 0.008" | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1205N24 | 0000 | 0000 | |
| 0.139" | -0.008" to 0.008" | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1205N25 | 0000 | 0000 | |
| 0.188" | -0.009" to 0.009" | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1205N26 | 0000 | 0000 | |
| 0.210" | -0.010" to 0.010" | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1205N27 | 0000 | 0000 | |
| 0.250" | -0.010" to 0.010" | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1205N28 | 0000 | 0000 | |
| 0.275" | -0.010" to 0.010" | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1205N29 | 0000 | 0000 | |
| 0.313" | -0.014" to 0.014" | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1205N31 | 0000 | 0000 | |
| 0.375" | -0.014" to 0.014" | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1205N32 | 00000 | 0000 | |
| 0.500" | -0.018" to 0.018" | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1205N33 | 00000 | 00000 | |
| 1.500 mm | -0.120 mm to 0.120 mm | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1191N72 | 0000 | 0000 | |
| 2.000 mm | -0.120 mm to 0.120 mm | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1191N73 | 0000 | 0000 | |
| 2.500 mm | -0.120 mm to 0.120 mm | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1191N74 | 0000 | 0000 | |
| 3.000 mm | -0.170 mm to 0.170 mm | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1191N75 | 0000 | 0000 | |
| 3.500 mm | -0.200 mm to 0.200 mm | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1191N76 | 0000 | 0000 | |
| 4.000 mm | -0.220 mm to 0.220 mm | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1191N77 | 0000 | 0000 | |
| 4.500 mm | -0.250 mm to 0.250 mm | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1191N78 | 0000 | 0000 | |
| 5.000 mm | -0.250 mm to 0.250 mm | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1191N79 | 0000 | 0000 | |
| 5.500 mm | -0.250 mm to 0.250 mm | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1191N81 | 0000 | 0000 | |
| 6.000 mm | -0.250 mm to 0.250 mm | Durometer 75A (Medium) | E2 Precision | ASTM D2000 | 5 to 395 | Black | 3, 10, 20, 50, 100 | 1191N82 | 0000 | 0000 | |
