These rods are zinc galvanized for good corrosion resistance.

Mount the flange to a machine or wall to support idler sprockets and pulleys in tensioning applications. They include washers and a nut to position your component and hold it in place.

These are Grade 8 threaded rods.

These metric Grade B7 threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

An economical alternative to Grade B7 and Grade B16 threaded rods, these metric Class 8.8 rods are suitable for fastening most machinery and equipment.

These metric threaded rods are about half the strength of medium-strength steel threaded rods for light duty hanging, mounting, and fastening.

Tighten these threaded rods by turning them to the left; once fastened, they resist loosening from counterclockwise motion. About half the strength of medium-strength steel threaded rods, use them for light duty hanging, mounting, and fastening.

Connect and separate threaded rods, studs, and other components. These hollow rods have internal threads on both ends, so you can make connections and still pass wiring and other objects through the center of the rod.

These steel studs are zinc plated to resist corrosion in wet environments.

About half the strength of medium-strength steel coupling nuts, these nuts are for light duty fastening applications.

The left-hand threads on these coupling nuts resists loosening from counterclockwise vibration. Use in light duty applications.

Choose these locknuts to fasten standard metric threads. They’re Class 8 steel, so they can be used in most fastening applications.

These metric-sized coupling nuts are Class 10 steel, so they’re about 25% stronger than medium-strength steel coupling nuts.

Often called sleeve nuts, these thread adapters fasten parts with right-hand threads to parts with left-hand threads.

Increase or decrease metric thread size from one male-threaded part to another. Commonly used to connect two differently sized threaded rods, they have a hex-shaped body, so you can tighten them with a standard wrench.

Designed for use with right-hand, internally threaded rod ends, these rods have right-hand threads on both ends. Use them for remote valve operators, throttle controllers, shifting mechanisms, and virtually any push/pull assembly.

Also known as rod‐end bearings, ball joint rod ends have an eyelet and a ball that swivels to support angular misalignment.

A PTFE-embedded insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication.

An oil-embedded bronze insert slowly releases lubricant throughout the life of these internally threaded rod ends.

These internally threaded rod ends have an oil-embedded bronze insert that slowly releases lubricant over time. Connect your grease gun to the fitting to relubricate.

Made to extremely tight tolerances, these internally threaded rod ends are for applications that require positioning accuracy, such as accelerators and other types of control linkages.

With at least 55° of ball swivel, these externally threaded rod ends accommodate greater misalignment than any other we offer.

These externally threaded steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends.

These internally threaded rod ends have an innovative body design that keeps the ball from being pushed out when supporting thrust loads.

A double row of precision ball bearings allows high speeds and smooth operation.

Without changing the ID, these inserts handle some misalignment on rod ends.

With a rubber bushing, these bolts reduce noise and vibration—attach them to rods, pipes, tubes, and cable linkages that have male threading. They’re commonly known as isolated rod ends.

Make quick adjustments to these rod ends by inserting and releasing the clevis pins without the need to bend them into place.

These linkages offer excellent wear resistance. They consist of internally threaded ball joint rod ends with a ball stud attached to simplify mounting.

An oil-embedded bronze insert slowly releases lubricant throughout the life of the joint.

These internally threaded linkages have a slippery PTFE liner that reduces wear and eliminates the need for lubrication.

Along with excellent wear resistance, these linkages have a grease fitting for easy lubrication. An internally threaded rod end connects to threaded rods, studs, and other parts with male threads.

These ball joint linkages are made of steel.

Use these linkages to create inline pivoting connections. They have internal threads on one end and external threads on the other.

A slippery PTFE liner reduces wear and eliminates the need for lubrication.

Typically used with high-pressure brass and bronze threaded pipe fittings.

A steel case concentrates and focuses the magnetic field. It also protects the magnetic material.