These sheets and bars are precision ground either on all six sides or just on the top and bottom.

An anodized coating bonds to the aluminum surface to improve wear and corrosion resistance.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

As the strongest multipurpose aluminum we offer, 6013 aluminum has the same good corrosion resistance, weldability, and machinability as 6061 with increased strength. 6013 is often fabricated into high-stress machine parts.

Choose between sheets and bars that are precision ground on all six sides or just on the top and bottom.

Also known as flat stock, these sheets and bars are precision ground on the top and bottom.

2011 has the best machinability of all the aluminum alloys. It is the most selected aluminum for screws, tube fittings, hose parts, and other items that require extensive machining.

Designed for use as a production injection mold and blow mold, tk Ultra 7 is extremely strong with a hard surface and excellent thermal conductivity.

The textured surface on these sheets increases rigidity and hides fingerprints and dents.

One side of these sheets is painted in your choice of gloss color, while the other side is painted gloss white.

The honeycomb design provides a higher strength-to-weight ratio than solid sheets.

One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish.

Made of 1000 series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required.

Highly corrosion resistant, 5083 is largely used around salt water for building ships and oil rigs. It maintains its strength in extreme cold, so it's also used to make cryogenic pressure vessels and tanks.

A black, gold, or silver anodized finish protects this 5005 aluminum from wear and abrasion.

Made of 5083 aluminum, these cast tool and jig plates are more corrosion resistant and respond better to anodizing than MIC6. This material is comparable to Alca 5 and ATP 5.

With a thickness that's precision ground to a tight tolerance, these bars are sometimes called flat stock.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

The galvannealed coating allows these steel sheets to be painted without prepping the surface. They're easier to weld and more scratch resistant than zinc-galvanized steel sheets. Use them for outdoor signs, cabinets, and doors.

A silver-filled resin coating on one side of these sheets protects from degradation caused by bacteria and fungi.

These 90° angles are zinc galvanized for good corrosion resistance.

The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.

Stronger than low-carbon steel with equally good machinability, 1045 carbon steel is widely used for bolts, studs, and shafts.

The nickel and molybdenum content gives AR400 carbon steel the ability to resist wear better than all other carbon steel. It's often used as wear strips, liners, and deflector plates.

Easy to forge, grind, and heat treat, these 1084 high-carbon steel bars offer high strength and resist wear and abrasion.

Because the thickness is oversized, you can finish these bars to your exact requirements.

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

4130 alloy steel has a low carbon content for good weldability. It's often used for gears, fasteners, and structural applications.

Heat treated for enhanced hardness and strength, A514 alloy steel is suitable for structural applications and supporting heavy loads.

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties.

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties.

Containing more carbon than low-carbon steel—but less than 1095 spring steel—1050 spring steel is easily formed into parts such as washers, brackets, and springs before being hardened for use.

Ductile cast iron is strong, resilient, and able to handle repeated stress without breaking.

Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

This material has tighter tolerances than standard 304 stainless steel.

The textured surface hides fingerprints and dents. This material is widely used in decorative applications, such as partitions and handrails.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners.

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

This material is precision ground to offer tighter tolerances than standard 316 stainless steel.

These selector packs contain one 1-3/4"×3"×1/16" thick piece of 316 stainless steel in the following finishes: brushed #4, mirror-like #8, and unpolished.

Because these thin sheets are harder than our other 316 stainless steel, they offer better wear resistance. Use them as a wrap, liner, or cover.

Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.

As the most formable of all the PH-grade materials, 17-7 PH stainless steel is widely used in the aerospace industry for intricate parts. When hardened, this material strengthens to make it resist distortion.

13-8 PH stainless steel can be hardened at lower temperatures than other heat-treatable types of stainless steel. It is widely used for fittings, pins, and lock washers.

One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It's often used for bearings, valves, and knife blades.

Precision ground on the top and bottom to a tight tolerance.

This material is hardened for increased wear resistance over standard 420 stainless steel.

Also called flat stock, these precision-ground bars are held to tight thickness and width tolerances.

440A stainless steel resists damage from impact and abrasion. It's often used for cutlery and valve components.

309/310 stainless steel has high levels of chromium and nickel to provide good corrosion resistance at elevated temperatures. It's often used in heat exchangers and furnaces.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

Polished on one side to a reflective, mirror-like finish.

353 brass is more formable than 385 brass while maintaining good machinability. Commonly called engraver’s brass, it’s well suited for fabrication processes such as knurling and threading. Use it to make nuts, gears, drawer pulls, and hinges.

One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.

Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

Polished on one side to a reflective, mirror-like finish.

With 99.99% copper content, 101 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lugs.

Also called tellurium copper, 145 copper contains tellurium, which makes it more machinable than all other copper while maintaining good corrosion resistance and high electrical conductivity. It’s often used for transformer and circuit-breaker terminals, welding torch tips, and fasteners.

In addition to being conductive, these 17510 beryllium copper bars are non-sparking and non-magnetic, so they’re used in mines and oil rigs, as well as for navigational tools.

Precision ground on the top and bottom, these bars have a tight thickness tolerance of ±0.002".

These bars are precision ground on the top and bottom for a tight thickness tolerance of ±0.002".

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

Because 510 bronze is very strong and formable, it is the best choice for applications involving repetitive motion, such as springs and bellows.

The thickness, length, and width are oversized for finishing to your exact requirements.

With an oversized thickness, length, and width, these bars can be finished to your exact requirements.

The thickness on these bars is precision ground to a tight tolerance.

These bars are precision ground to a tight thickness tolerance.

These W1 bars have lower amounts of alloy elements than other tool steels for excellent machinability.

The thickness on these bars is precision ground to a tight tolerance.

Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical processing equipment, heat exchangers, and marine hardware.

A blend of nickel, chromium, and molybdenum gives these 625 nickel sheets the strength, weldability, and corrosion resistance necessary for use in expansion joints, exhaust systems, and marine components. They are comparable to Inconel 625 and Haynes 625.

From marine hardware to chemical-processing equipment, 400 nickel sheets and bars are widely used for their strength, weldability, and formability. Comparable to Monel, this nickel-copper alloy will stand up to highly corrosive environments, such as those involving salt water, sulfuric acid, and alkalies.

Even in temperatures up to 2000° F, Alloy X nickel sheets offer good strength and weldability, along with excellent oxidation resistance. They're often used for components in gas turbine engines and furnaces. This material is equivalent to Inconel HX and Hastelloy X.

Use this nickel-iron-cobalt alloy as a magnetic shield to protect electronic equipment from EMI/RFI interference.

C-276 nickel has excellent corrosion resistance against chemicals, including nitric acid, sulfuric acid, and hydrochloric acid.

Able to withstand greater heat than molybdenum and other high-temperature metal, this chemically pure tungsten is ultra dense for use in high-heat parts in vacuum furnaces, heat shields, and radiation shields.

Considered commercially pure, this material is 99% zinc.

With 99.9% tin content, this material is considered commercially pure. It's commonly used to make gaskets and filters.

Hexagonal holes provide a large open area for high-flow applications.

Trap small particles in low-flow applications—these sheets have tiny holes and small open area.

Hexagonal holes provide a large open area for high-flow applications.

Brass is softer and easier to form compared to other metals.