Illuminate outdoor exit paths and emergency assembly areas during power outages. Enclosed to withstand the elements, these lights are UL listed to resist rain, snow, and humidity. Their battery generates at least 90 minutes of power in compliance with UL 924 standards for backup lights. A low-voltage disconnect extends the life of the battery by switching it off before it’s fully drained. Direct light where it's needed by angling the adjustable heads.

All have a manual-test switch that lets you verify the battery and heads are working. Lights with automatic battery testing run a self-check once a month. An indicator tells you if they need maintenance.

Maximum distance between lights represents how far you can space out two lights without creating a dark zone.

A gasket seals the enclosure of these backup lights from washdowns. Adjust the heads toward your walkways—they kick on when the power goes out, lighting the path toward exits. Rated UL 924, their battery provides at least 90 minutes of light. A low-voltage disconnect automatically shuts off the battery before it's fully drained, prolonging its overall lifespan. All are dust-tight.

For high-pressure or corrosive washdowns, choose a light rated IP66 or NEMA 4X. All have a manual-test switch that lets you verify the battery and heads are working. Lights with automatic battery testing run a self-check once a month. An indicator tells you if they need maintenance.

Style B and D lights are compatible with add-on heads. Run wiring between add-on heads and your backup light to extend lighting into stairwells, exits, and other remote areas. The greater the wattage of the add-on heads—and the more of them you use—the more they’ll reduce your light’s run time. Maximum wattage for add-on heads refers to the total wattage of add-ons you can use without pushing your light’s runtime below 90 minutes.

Maximum distance between lights represents how far you can space out two lights without creating a dark zone.

Light the path toward exits where combustible gases and dust are constantly present—the enclosure on these lights contains sparks and flashes to prevent a reaction with nearby hazards. They’re often found in extreme environments, such as refineries and chemical plants. Because they’re totally sealed, these lights meet IP66 to withstand dust and washdowns. They’re also UL marine listed to resist corrosion from salt water. Rated IK10—the highest level of impact protection—they stand up to wear and tear.

Adjust the heads toward your walkways, and they’ll kick on when the power goes out. With a battery life of 3 hours, they meet UL 924 standards for generating at least 90 minutes of light. Press the test switch to check if the heads or battery require maintenance.

Maximum distance between lights represents how far you can space out two lights without creating a dark zone.

Expand the reach of emergency backup lights. These add-on heads are often used to extend emergency lighting into stairwells, exits, and other remote areas. They’re an economical alternative to buying an additional full-sized backup light. To power them, run low-voltage wiring right from your backup light. They are adjustable, so you can angle them to direct light where it’s needed.

Select a head that matches your backup light’s output voltage. To meet UL 924, don't exceed the maximum wattage of add-on heads listed for your light. This ensures you won’t push your light's run time below 90 minutes.

Heads for use in damp locations withstand humidity and moisture. Heads for use in wet locations are sealed to keep out humidity, rain, and snow. Heads for use in washdown meet NEMA 4X, which also certifies them as protected from corrosive liquids and dust.

Maximum distance between lights represents how far you can space out two lights without creating a dark zone.

Install these lights in aircraft hangars, gas plants, and other facilities where flammable and combustible gases or dust may be present, such as leaks or ventilation failures. Rated NEC Class I, Division 2, they seal out gases but aren't built to contain explosions. The sealed design also keeps out liquid and dust—they're rated NEMA 4X and IP66 to resist washdowns. An ETL sanitation marking verifies they're safe for use in food environments.

Adjust the heads toward your walkways—they kick on when the power goes out, lighting the path toward exits. Rated UL 924, their battery generates at least 90 minutes of light. A low-voltage disconnect extends the life of the battery by switching it off before it’s fully drained. Once a month, these lights automatically test that the battery and heads are working. An indicator tells you if they need maintenance. They also have a manual switch to test them any time.

Wire these lights to add-on heads to extend lighting into stairwells, exits, and other remote areas. The greater the wattage of the add-on heads—and the more of them you use—the more they’ll reduce your light’s run time. Maximum wattage for add-on heads refers to the total wattage of add-ons you can use without pushing your light’s run time below 90 minutes.

Maximum distance between lights represents how far you can space out two lights without creating a dark zone.

Contain explosions, sparks, and flashes—the enclosure on these ceiling lights makes them safe to use in NEC Class I and II, Division 1 hazardous locations. They meet NEC hazardous location temperature classifications, so their surface stays cool enough to avoid igniting hazardous gases or dust. Designed to resist corrosion from salt water, they’re also UL marine listed. All lights have adjustable mounting brackets that can rotate 45° in either direction to direct light where you need it.

Style 1 lights are built for harsh environments, like offshore oil rigs. They have been tested to withstand vibration without breaking or shutting down. The mounting bracket matches standard bolt hole patterns.

Lights with a backup battery shine for at least 90 minutes during a power outage to comply with UL 924.