McMaster-Carr logo
    Filter by
    End Shape
    Pin Type
    Fastener Head Type
    Industrial Info Compare
    System of Measurement
    Shaft Type
    End Type
    Drive Anchor Type
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Tolerance Rating
    Minimum Installation Depth
    Drill Bit Size
    Industrial Info Compare
    Attribute Image
    Pin Material
    Head Diameter
    Connection Hardware
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    121 Products

    Light Duty Drive Rivet Anchors for Block and Brick

    A step up from a nail, the rivet head creates a secure connection with a finished look for mounting lightweight signs, screens, and panels. Easier to install than other types of anchors for block and brick, the anchors expand as you hammer in the pin or screw. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials.
    To install, insert the anchor through your component and into a drilled hole. Then, hammer the pin or screw until it's flush with the anchor's head, which expands the anchor body.
    Pin Drive Anchors
    Image of Product. Front orientation. Contains Annotated. Anchors. Light Duty Drive Rivet Anchors for Block and Brick, Pin Drive Anchors.
    To remove, pry out the pin and then pull out the anchor.
    Head
    Ultimate
    Strength
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pin Material
    Material
    Pull-Out
    Shear
    Pkg.
    Qty.
    Pkg.
    3/16" Diameter
    3/4"9/16"1/8"3/4"3/16"
    Zinc-Plated SteelNylonNot RatedNot Rated10097066A017000000
    1"9/16"1/8"1"3/16"
    Zinc-Plated SteelNylonNot RatedNot Rated10097066A01000000
     
    1/4" Diameter
    3/4"9/16"7/64"3/4"1/4"
    Acetal
    NylonNot RatedNot Rated10097067A05000000
    3/4"9/16"1/8"3/4"1/4"
    Zinc-Plated SteelNylonNot RatedNot Rated10097066A01300000
    1"9/16"7/64"1"1/4"
    Acetal
    NylonNot RatedNot Rated10097067A05100000
    1"9/16"1/8"1"1/4"
    Zinc-Plated SteelNylonNot RatedNot Rated10097066A01600000
    1 1/2"9/16"7/64"1 1/2"1/4"
    Acetal
    NylonNot RatedNot Rated10097067A05200000
    1 1/2"9/16"1/8"1 1/2"1/4"
    Zinc-Plated SteelNylonNot RatedNot Rated10097066A04300000
     
    Easy-Release Screw Drive Anchors
    Image of Product. Front orientation. Contains Annotated. Anchors. Light Duty Drive Rivet Anchors for Block and Brick, Easy-Release Screw Drive Anchors.
    To remove, unthread the screw to release the anchor's grip and then pull out the anchor.
    Head
    Ultimate
    Strength
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Screw Material
    Material
    Pull-Out
    Shear
    Pkg.
    Qty.
    Pkg.
    3/16" Diameter
    1"7/16"1/8"1"3/16"
    Zinc-Plated SteelNylonNot RatedNot Rated10097066A020000000
     
    1/4" Diameter
    1"7/16"1/8"1"1/4"
    Zinc-Plated SteelNylonNot RatedNot Rated10097066A02600000
    1 1/2"7/16"1/8"1 1/2"1/4"
    Zinc-Plated SteelNylonNot RatedNot Rated10097066A02800000
     

    Plastic Dowel Pins

    Assemble circuit boards and other electronic parts with dowel pins that insulate against stray current. These pins prevent short circuits and electromagnetic interference (EMI) that can harm performance and cause malfunctions. They’re also lighter than metal pins if you need to reduce weight in prototypes and moving assemblies. Dowel pins are machined to tight tolerances and have a uniform diameter for a snug fit. Since they can be hard to remove, they are best for fixtures that don't need to be adjusted or taken apart frequently.
    Plastic
    Image of Product. Front orientation. Dowel Pins. Plastic Dowel Pins.
    Wear-Resistant Acetal—Slippery and wear resistant, these pins make excellent pivots. They're often used for automated machinery and other moving parts that create a lot of friction. They also prevent short circuits better than PEEK and polycarbonate plastic.
    Chemical-Resistant PTFE—The most chemical-resistant plastic dowel pins we offer. These pins can stand up to harsh acids and corrosive cleaners, such as circuit board etching solutions. Similar to acetal, PTFE pins are also slippery and make excellent pivots, but they are not as strong.
    Impact-Resistant Polycarbonate—Our most impact-resistant plastic pins, these resist cracking when inserted into tight holes. They are also clear to be less noticeable in your assembly.
    High-Strength PEEK—The closest alternative to metal pins, these offer the best strength to stand up to stress and vibration. In addition, they won't degrade or lose their shape when exposed to high heat. They aren't very impact resistant, however, and may crack if inserted too forcefully.
    Lg.
    Dia. Tolerance
    Min.
    Hardness
    Min. Temp.,
    ° F
    Max. Temp.,
    ° F
    Color
    Pkg.
    Qty.
    Pkg.
    Wear-Resistant Acetal
     
    3/64" Diameter
    1/8"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A10600000
    1/4"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A1090000
    3/8"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A1120000
    1/2"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A1150000
     
    1/16" Diameter
    1/8"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A2020000
    1/4"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A2060000
    3/8"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A2110000
    1/2"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A2160000
     
    3/32" Diameter
    1/8"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A3070000
    1/4"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A3140000
    3/8"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A3190000
    1/2"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A3230000
     
    1/8" Diameter
    1/8"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A4050000
    3/16"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A4090000
    1/4"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A4130000
    3/8"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A4190000
    1/2"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A4260000
     
    3/16" Diameter
    1/4"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A5190000
    3/8"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A5250000
    1/2"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A5290000
    3/4"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A5330000
     
    13/64" Diameter
    1/2"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A5820000
     
    1/4" Diameter
    1/4"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A6220000
    3/8"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A6270000
    1/2"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A6360000
    3/4"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A6390000
     
    5/16" Diameter
    3/8"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A7180000
    1/2"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A7240000
    3/4"-0.005" to 0.005"Rockwell M80Not Rated220White5097155A7370000
     
    Chemical-Resistant PTFE
     
    1/8" Diameter
    1/4"-0.005" to 0.005"Rockwell R58-100400White5098703A50000000
    3/8"-0.005" to 0.005"Rockwell R58-100400White5098703A54000000
    1/2"-0.005" to 0.005"Rockwell R58-100400White5098703A52000000
     
    3/16" Diameter
    3/8"-0.005" to 0.005"Rockwell R58-100400White5098703A65000000
    1/2"-0.005" to 0.005"Rockwell R58-100400White5098703A66000000
    3/4"-0.005" to 0.005"Rockwell R58-100400White2598703A6700000
     
    1/4" Diameter
    1/2"-0.005" to 0.005"Rockwell R58-100400White2598703A73000000
    3/4"-0.005" to 0.005"Rockwell R58-100400White2598703A74000000
     
    Impact-Resistant Polycarbonate
     
    3/64" Diameter
    1/8"-0.005" to 0.005"Rockwell R118-40210Clear1092078A2000000
    1/4"-0.005" to 0.005"Rockwell R118-40210Clear1092078A2010000
    3/8"-0.005" to 0.005"Rockwell R118-40210Clear1092078A2020000
    1/2"-0.005" to 0.005"Rockwell R118-40210Clear1092078A2030000
     
    1/16" Diameter
    1/8"-0.005" to 0.005"Rockwell R118-40210Clear1092078A2040000
    1/4"-0.005" to 0.005"Rockwell R118-40210Clear1092078A2050000
    3/8"-0.005" to 0.005"Rockwell R118-40210Clear1092078A2060000
    1/2"-0.005" to 0.005"Rockwell R118-40210Clear1092078A2070000
     
    3/32" Diameter
    1/8"-0.005" to 0.005"Rockwell R118-40210Clear1092078A2080000
    1/4"-0.005" to 0.005"Rockwell R118-40210Clear1092078A20900000
    5/16"-0.005" to 0.005"Rockwell R118-40210Clear1092078A21000000
    3/8"-0.005" to 0.005"Rockwell R118-40210Clear1092078A21100000
    1/2"-0.005" to 0.005"Rockwell R118-40210Clear1092078A21200000
     
    1/8" Diameter
    1/8"-0.005" to 0.005"Rockwell R118-40210Clear1092078A2130000
    3/16"-0.005" to 0.005"Rockwell R118-40210Clear1092078A21400000
    1/4"-0.005" to 0.005"Rockwell R118-40210Clear1092078A21500000
    3/8"-0.005" to 0.005"Rockwell R118-40210Clear1092078A21600000
    1/2"-0.005" to 0.005"Rockwell R118-40210Clear1092078A21700000
     
    3/16" Diameter
    1/8"-0.005" to 0.005"Rockwell R118-40210Clear1092078A21800000
    1/4"-0.005" to 0.005"Rockwell R118-40210Clear1092078A21900000
    3/8"-0.005" to 0.005"Rockwell R118-40210Clear1092078A22000000
    1/2"-0.005" to 0.005"Rockwell R118-40210Clear1092078A22100000
    3/4"-0.005" to 0.005"Rockwell R118-40210Clear1092078A22200000
     
    1/4" Diameter
    1/8"-0.005" to 0.005"Rockwell R118-40210Clear1092078A22300000
    1/4"-0.005" to 0.005"Rockwell R118-40210Clear1092078A22400000
    3/8"-0.005" to 0.005"Rockwell R118-40210Clear1092078A22500000
    1/2"-0.005" to 0.005"Rockwell R118-40210Clear1092078A22600000
    3/4"-0.005" to 0.005"Rockwell R118-40210Clear592078A2270000
     
    5/16" Diameter
    1/8"-0.005" to 0.005"Rockwell R118-40210Clear592078A2280000
    1/4"-0.005" to 0.005"Rockwell R118-40210Clear592078A2290000
    3/8"-0.005" to 0.005"Rockwell R118-40210Clear592078A2300000
    1/2"-0.005" to 0.005"Rockwell R118-40210Clear592078A2310000
    5/8"-0.005" to 0.005"Rockwell R118-40210Clear592078A2320000
    3/4"-0.005" to 0.005"Rockwell R118-40210Clear592078A2330000
     
    High-Strength PEEK
     
    3/64" Diameter
    1/8"-0.005" to 0.005"Rockwell M126-50500Beige1091962A2000000
    1/4"-0.005" to 0.005"Rockwell M126-50500Beige1091962A2010000
    3/8"-0.005" to 0.005"Rockwell M126-50500Beige1091962A2020000
    1/2"-0.005" to 0.005"Rockwell M126-50500Beige1091962A20300000
     
    1/16" Diameter
    1/8"-0.005" to 0.005"Rockwell M126-50500Beige1091962A2040000
    1/4"-0.005" to 0.005"Rockwell M126-50500Beige1091962A2050000
    3/8"-0.005" to 0.005"Rockwell M126-50500Beige1091962A2060000
    1/2"-0.005" to 0.005"Rockwell M126-50500Beige1091962A20700000
     
    3/32" Diameter
    1/8"-0.005" to 0.005"Rockwell M126-50500Beige1091962A2080000
    1/4"-0.005" to 0.005"Rockwell M126-50500Beige1091962A20900000
    5/16"-0.005" to 0.005"Rockwell M126-50500Beige1091962A21000000
    3/8"-0.005" to 0.005"Rockwell M126-50500Beige1091962A21100000
    1/2"-0.005" to 0.005"Rockwell M126-50500Beige1091962A21200000
     
    1/8" Diameter
    1/8"-0.005" to 0.005"Rockwell M126-50500Beige1091962A21300000
    3/16"-0.005" to 0.005"Rockwell M126-50500Beige1091962A21400000
    1/4"-0.005" to 0.005"Rockwell M126-50500Beige1091962A21500000
    3/8"-0.005" to 0.005"Rockwell M126-50500Beige1091962A21600000
    1/2"-0.005" to 0.005"Rockwell M126-50500Beige1091962A21700000
     
    3/16" Diameter
    1/8"-0.005" to 0.005"Rockwell M126-50500Beige591962A2180000
    1/4"-0.005" to 0.005"Rockwell M126-50500Beige591962A2190000
    3/8"-0.005" to 0.005"Rockwell M126-50500Beige591962A2200000
    1/2"-0.005" to 0.005"Rockwell M126-50500Beige591962A2210000
    3/4"-0.005" to 0.005"Rockwell M126-50500Beige591962A2220000
     
    1/4" Diameter
    1/8"-0.005" to 0.005"Rockwell M126-50500Beige591962A2230000
    1/4"-0.005" to 0.005"Rockwell M126-50500Beige591962A2240000
    3/8"-0.005" to 0.005"Rockwell M126-50500Beige591962A22500000
    1/2"-0.005" to 0.005"Rockwell M126-50500Beige591962A22600000
    3/4"-0.005" to 0.005"Rockwell M126-50500Beige191962A2270000
     
    5/16" Diameter
    1/8"-0.005" to 0.005"Rockwell M126-50500Beige191962A2280000
    1/4"-0.005" to 0.005"Rockwell M126-50500Beige191962A2290000
    3/8"-0.005" to 0.005"Rockwell M126-50500Beige191962A2300000
    1/2"-0.005" to 0.005"Rockwell M126-50500Beige191962A2310000
    5/8"-0.005" to 0.005"Rockwell M126-50500Beige191962A2320000
    3/4"-0.005" to 0.005"Rockwell M126-50500Beige191962A2330000
     

    Light Duty Drive Rivet Anchors for Concrete

    Image of Product. Front orientation. Contains Annotated. Anchors. Light Duty Drive Rivet Anchors for Concrete.
    More secure than masonry nails but not as strong as other anchors for concrete, these are often used to mount lightweight signs and control panels. Also known as tap-in rivets, they’re barbed to resist pullout after being hammered into a hole. All have a rounded head for a finished look that won’t snag on objects.
    To install, hammer the anchor through your component into a drilled hole that’s slightly longer than the anchor until the head is flush with the surface. The anchor will compress and then expand inside the hole. To remove, pry out the anchor.
    Nylon—Strong, durable, and economical. Best for dry environments, these anchors will swell and weaken when exposed to moisture.
    Head
    Ultimate
    Strength, lbf
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    Nylon
     
    9/32" Diameter
    1"5/8"1/8"1"1/4"
    1402204,000 psi Concrete10092410A411000000
    1 5/8"5/8"1/8"1"1/4"
    1402204,000 psi Concrete5092410A41200000
    2 1/8"5/8"1/8"1"1/4"
    1402204,000 psi Concrete5092410A41300000
    2 5/8"5/8"1/8"1"1/4"
    1402204,000 psi Concrete2592410A41400000
    3 1/8"5/8"1/8"1"1/4"
    1402204,000 psi Concrete2592410A41500000
     
    back to top