We will reply to your message within an hour.
More
Sensitive along their entire length, these switches are often used to signal when an overhead door closes or an item reaches the end of a conveyor.
Prevent automatic doors from closing on a person or an object—these switches immediately turn machinery off when actuated with minimal force.
Minimize false triggers—these switches require 10 lbs. of actuation force in order to shut off machinery immediately.
Often used on conveyor systems and bin filling operations, these switches have the rapid-closing action of a snap-acting switch but have a large actuator for sensing larger objects.
These switches actuate with the slightest push for a high degree of accuracy.
Sealed actuators prevent these switches from jamming, even when exposed to oil, sand, mud, or ice.
These switches actuate with the slightest push for a high degree of accuracy. They're rated IP67 for protection from wet locations and temporary submersion.
Sealed actuators prevent these switches from jamming, even when exposed to sand, mud, or dirt. They're rated IP67 for protection from temporary submersion.
Rated NEMA 6P, 13, and IP67, these switches are protected from corrosion, oil/coolant spraying, washdowns, and temporary submersion.
Stack these slim switches together, or fit them into tight spaces. They're rated IP67 for protection from temporary submersion.
Secure these switches into panels using mounting nuts.
Rated IP67, these switches are protected from temporary submersion. When an object in motion comes into contact with the actuator, it sends a signal to open or close a circuit.
Shorter and thinner than other safety limit switches, these are sized to fit tight spaces.
Prevent equipment from automatically restarting—these switches must be manually reset each time they're actuated.
Protect machinery and ensure the safety of personnel—these switches will open the circuit when actuated even if a spring fails or the contacts stick.
Use these switches where ignitable gas and dust may be present. They meet NEC Class I, Division 1, Groups B, C, and D; and Class II, Division 1, Groups E, F, and G for hazardous locations.
With a smaller footprint than other switch mats, these fit in confined spaces.
Rated IP67 and NEMA 6, these switch mats withstand washdowns.
Customize the length of these switches by cutting them from a 25-foot roll.
These mats fit under carpeting or anywhere else you want to hide them.
Step on these mats to control doors, lights, or alarms.
Customize the length of these switches by cutting them from a 50-foot roll.
These narrow switches are also thin enough to be hidden under carpeting or installed anywhere space is limited.
Made with stainless steel conductors, these switches resist corrosion in damp areas. They’re less than 1/4” thick, so they’ll fit under floor mats and in other tight spaces.
Step or press anywhere along the switch to control doors, lights, or alarms.
Prevent personnel from getting too close to dangerous equipment when equipment is on—these mats turn equipment off when someone steps on them or when a fault is detected.
Thicker than standard safety switch mats, these withstand repeated impact from heavy and sharp objects.
Cover robot arms and tools with this padding to help prevent injuries in areas where people are working nearby. When the padding is touched, pressure sensors signal your machine to stop moving.