Apply this liquid for a skin-tight protective coating that insulates and resists moisture, acids, and corrosion. It adheres to metal, plastic, vinyl, rubber, and composite surfaces.

These sleeves contain a corrosion inhibitor to shield metal shafts and threaded parts from corrosion. They also protect against chipping and abrasion. They are elastic to stretch and fit over material.

Also known as Scotchfil, this noncorrosive putty tape wraps, stretches, and molds around irregular shapes for insulation buildup.

Shield shipments of metal equipment that could be exposed to the outdoors for long periods of time. This wrap is treated to prevent fading and degrading in the sun, while a built-in inhibitor guards the contents underneath from rain, snow, and humidity. It’s often used in place of oils and desiccants that prevent rust, so you don’t need to clean or degrease your equipment before covering it. Shrink the wrap with a heat gun to create a formfitting barrier that keeps out moisture and dirt.

At least six times thicker than standard heat-shrink wrap, you can drag and shrink this wrap over corners of equipment without it tearing. It’s large enough to cover forklifts, industrial compressors, or even a boat, but it’s easy enough to trim down using a utility knife. This wrap comes folded on a roll for efficient storage.

Note: One mil equals 0.001”.

Shield metal from corrosion and block out damaging UV light. Bags have a hook-and-loop closure and shrink when heated for skin-tight barrier around material.

Note: One mil equals 0.001".

Providing all-weather corrosion protection, this vinyl tape resists salt water, UV light, acids, and alkalies. It also resists impact and abrasion. Use it to wrap pipes and electrical conduit both above and below ground.

Strengthened with polyethylene fabric, this wrap resists tears and punctures while shielding sharp, heavy metal parts from corrosion. It releases vapors that latch on to steel and other types of metal, creating a protective barrier. Also called volatile corrosion inhibitor (VCI) wrap. This wrap won’t break down from water, grease, or oil.

Protect electronic components from tarnish with this chemically impregnated paper wrap, also known as volatile corrosion inhibitor (VCI) wrap. It is bleached and odorless. For the best protection, the coated side should be in contact with the metal.

Note: One mil equals 0.001".

Create a corrosion-resistant barrier to withstand moisture, mild chemicals, and the elements. Made of stainless steel, this tape outlasts aluminum alternatives. It's often used to patch scratched coatings and finishes in marine, food-processing, and nuclear applications. Bond it directly to metal, wood, and concrete surfaces.

Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.