A large loop handle makes these pins easy to grip.

These pins have multiple through holes; change the length by moving the cotter pin. The bend makes them easy to insert and pull out.

These pins combine the locking capabilities of a clevis pin with the precision diameter of a dowel pin for a tight fit.

A plastic-coated T-handle welded to these pins makes them easy to grab.

Easier to install and remove than standard clevis pins, these pins have a ring-grip handle.

A swivel handle makes these pins easy to install and remove, while the toggle locks them in place. Flip the toggle to release the pin.

A spring holds these pins tight, while a toggle locks them in place. Flip the toggle to release the pin.

Sized to fit snugly around pipe and tube, these pins use spring force to keep the retainer closed.

Spring force holds pieces of telescoping tubing together. Also known as snap buttons and tubing buttons.

Install or remove these pins from either side. Slide a retaining ring into the groove for a secure hold that takes up less space than a cotter pin.

The smooth ring handle on these pins won't catch on parts. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

These pins have a low-profile head, so they won't get knocked out of place. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

A smooth ball handle is easy to grip and won't catch on other parts. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

A high-profile knob is easy to grip, but fits in small spaces. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

A T-handle makes these pins easy to grip. The shoulder keeps a portion of the pin outside the hole and makes them easy to grab.

For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

The extra height and smaller width of the grip make the button more accessible in tight spaces. For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

For the tightest spaces, these narrow-grip pins have the smallest heads of any of our locking quick-release pins. They lock in place until you push the button to release the spring-loaded retaining balls.

A T-handle makes these pins easy to grip. Made entirely of stainless steel, they stand up to corrosive enviroments. Pins lock in place until you push the button to release the spring-loaded retaining balls.

A recessed button prevents accidental pin removal. These all-stainless steel pins stand up to corrosive environments. They lock in place until you push the button to release the spring-loaded retaining balls.

These pins adjust to take up play in a system or hold parts in holes of varying thicknesses. Spin the handle up or down, then tighten the locknut to change the length by up to ½”. Pins lock in place until you push the button to release the spring-loaded retaining balls.

Also known as double-acting pins, these pins lock in place until you push or pull the handle to release the spring-loaded retaining balls. The T-handle is easy to grip.

These pins lock in place until you push the button to release the spring-loaded retaining balls, and can also be secured with a cotter pin for longer-term holding. Two-step locking prevents accidental removal.

Use a screwdriver to install these receptacles in a threaded hole.

Also known as hitch pin clips and R-clips, these pins are easy to install and remove.

Slide the pin through a hole then snap the ring down to lock these pins in place. Also known as click pins.

Also known as safety pins, these are easy to install and remove. Tension keeps them closed.

Clip these pins onto grooved shafts and clevis pins with retaining ring grooves.

The double-head design lets you push or pull these pins from either side of the hole. Once in place there's little chance they will be vibrated out or knocked off.

Twist these rings on to lock pins in place. They don't have the sharp ends of other cotter pins.

Also known as hitch pin clips and R-clips, use these cotter pins in applications requiring quick installation and removal.

Clip these pins onto grooved shafts and clevis pins to keep components in place.