These splices can withstand higher temperatures than insulated splices.

Visually confirm your connection through the inspection window in the insulation of these splices.

The most secure, electrically conductive, and environmentally sealed connection we offer, these splices have enclosed solder that melts when heat is applied.

Able to withstand temperatures up to 900°F, these splices are suitable for use in high-heat applications such as ovens, motors, and light fixtures.

Filled with grease, these splices resist moisture and corrosion.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a watertight seal.

A plastic cover fully insulates these splices.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Join wires and cables in some of the dirtiest and wettest locations—from paper mills to marine environments—without special tools.

Insert wires and twist on the threaded end caps. The caps lock wires into place, making these splices a good choice for high-vibration applications.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Connect wire without stripping—these splices pierce insulation.

Compress the barrel twice on each end for an extra-tight grip in high-vibration applications.

A plastic cover fully insulates these splices and is clear so you can visually confirm the connection.

No wire stripping is required—these connectors will pierce the insulation.

Make a quick, secure wire connection without crimping.

Filled with silicone, these connectors seal out moisture and prevent corrosion.

Made of porcelain, these connectors can withstand temperatures up to 1200°F.

Large enough to be used with a wide range of wire sizes, these connectors can still fit into cramped outlet boxes.

Soft molding over the wings provides a comfortable grip.

Tap and splice multiple wires in temporarily wet environments and up to six feet underground.

Use a single splice to connect more than two wires.

Connect a tap wire to a main wire without stripping—these wire taps penetrate insulation.

Tap a main wire or add a finished terminal to the end of a wire.

Use the included crimping tool to install a variety of terminals and butt splices.