The premium abrasive stays sharp longer.

The flaps are slit into narrow strips to provide more flexibility than other flap wheels.

The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

A coating prevents dust and debris from building up on the abrasive surface.

These assortments include various sizes and grits of flap sanding wheels. The threaded stud allows faster wheel changes but requires the use of an adapter in your tool.

An additive in the abrasive resists heat.

A coating prevents dust and debris from building up on the abrasive surface.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

Polish, clean, and debur deep inside tubes and cylinders.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

A heavy duty backing plate provides more support than standard discs for heavy material removal.

The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.

These discs have a harder abrasive than standard flap sanding discs for corners.

With more flaps than standard discs, these last 30-40% longer.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

With more flaps than standard discs, these last 30-40% longer.

Set at an angle and widely spaced, the flaps reach into corners.

The premium abrasive stays sharp longer.

The heavy duty construction provides more support than standard discs for heavy material removal.

These discs have a harder abrasive than standard flexible-edge quick-change discs.

The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.

Thicker, more pliable, and less aggressive than standard nylon mesh quick-change discs, use these for finer sanding on curved surfaces.

The heavy duty construction provides more support than standard discs for heavy material removal.

The premium abrasive stays sharp longer.

Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.

A coating prevents dust and debris from building up on the abrasive surface.

Holes allow dust removal when used with a vacuum sander.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

These discs have a long-lasting diamond abrasive.

The premium abrasive stays sharp longer.

A coating prevents dust and debris from building up on the abrasive surface.

Holes in the disc let you see the surface you’re sanding.

The premium abrasive stays sharp longer.

The premium abrasive stays sharp longer.

The premium abrasive stays sharp longer. Holes in the disc let you see the surface you’re sanding.

Fit these discs over your tool's arbor to sand masonry, ceramics, and composites.

The thick, abrasive-embedded nylon mesh construction gives you maximum control over sanding pressure.

These discs are abrasive-embedded cloth with a cushioned layer.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Holes allow dust removal when used with a vacuum sander.

Use with commercial floor buffing machines to sand wood floors and strip tape from concrete.

Slip a cap onto the head of a shank and sand small, recessed, and hard-to-reach areas.

These rubber blocks sand flat surfaces.

Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.

The perforated honeycomb pattern cuts carbide, ceramics, and glass without the need for cleaning.

Wheels are a blend of aluminum oxide and zirconia alumina, which removes more material and lasts three times as long as our General Purpose Grinding Wheels. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Bonded without any wax or rubber filler, these wheels resist material buildup. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Multiple layers of nylon mesh embedded with abrasive provide a cushioned grind. Also known as unitized discs or wheels.

Heat-dissipating holes reduce material buildup and extend the life of the wheel. Wheels have a semiflexible backing that conforms to curved and rough surfaces.

A blend of cotton laminate and aluminum oxide creates a smoother surface than other grinding wheels with similar grits. Wheels are also known as Type 27 wheels and raised-hub wheels.

Wheels have a large surface area and a thick layer of rough abrasive for heavy material removal on concrete and stone. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.

Use on 7" and 9" angle grinders and sanders to remove paint, rust, and scale from hard surfaces.

Wheels remove more material than other grinding wheels with cotton laminate.

A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.

Unlike aluminum oxide wheels, these silicon carbide wheels won’t clog when grinding soft metals.

A nickel-coated diamond grit and synthetic resin bond make these wheels extremely hard and wear resistant.

Use sanding belts on your grinder. As the wheel rotates, the rubber tire expands and holds the belt in place.

The flexible edge of the sanding disc overhangs these backup pads.

Secure the shank into the collet or chuck of a tool.

Holes allow dust removal when used with a vacuum sander.

Thread one of these backup pads onto the tool’s arbor, then attach a sanding disc and secure with the disc nut.

These pads are designed to channel air flow to the sanding disc for cooler operation, prolonging the life of the disc.

Use screws to attach these pads to a tool.

Thread the stud into the tool's spindle.