Install these blowers into ductwork where high static pressures are present.

Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard spark-resistant blowers can handle.

Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard hazardous location spark-resistant blowers can handle.

A 304 stainless steel housing offers good corrosion resistance.

These blowers have a motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups F and G hazardous locations.

Use your compressed air source to power these blowers.

In addition to blowing twice as much air as other portable blowers, these have a motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups E, F, and G hazardous locations.

Position these exhausters above drums, tanks, and distillers.

For exact positioning, these hoses swivel 360°.

Move the hose into position and the support arm will hold it in place.

Often used for electric-to-gas conversions and renovations, these exhausters allow gas- or oil-fired equipment to be vented through a sidewall rather than a chimney.

Produce three times the airflow as standard direct-drive duct fans.

Often used in vehicles, these fans operate on DC power.

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged.

Better suited for dirty, dusty, and damp environments than standard belt-drive fans, these have a totally enclosed motor enclosure.

These fans come complete with a movable-blade louver. The louvers are gravity operated so they open only when air flows through them, which prevents backdrafts.

Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged.

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

Designed to spin freely with the slightest breeze, these fans create a vacuum that draws air out from buildings and ventilation systems—no electricity required.

Exhaust air and humidity directly into the outdoors without using duct.

These fans have a light that can operate alone or share a switch with the fan.

With a ball-bearing motor and cupped fan blades, these fans last longer and focus airflow better than economy fans.

Wheel these mobile fans wherever you need them. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

With an aluminum housing, these fans stand up to corrosion better than economy fans.

Position these fans near meeting areas to circulate air without drowning out voices.

A bright yellow guard makes these fans easy to spot.

Cool down areas where you don't have an outlet—these fans are lightweight and battery-powered so you can tote them anywhere.

Generate at least 25% greater airflow than economy and premium fans.

With a ball-bearing motor and cupped fan blades, these fans last longer and focus airflow better than economy fans.

Wheels make it easy to move these fans.

Mount these fans on a bench top or in a vehicle.

Mount these fans on flat ceilings. All include a support cable and downrods to mount them into joists.

Keep cool with these personal-size wall-mount fans.

Often used in welding shops and oil refineries, the motor in these fans is rated as safe for use around flammable and combustible gas, vapor, and dust.

These fans produce greater airflow than standard equipment-cooling fans.

Also known as muffin fans, these keep heat-sensitive equipment such as electronic components cool.

Keep electronics from overheating in places that must be sanitized often. These DC-powered fans are rated IP69K, meaning you won’t damage them with harsh jets of water and they block out dust.

Able to withstand dust and water splashes, these fans are IP rated.

Keep electronics cool in wet areas. These fans withstand weather, washdowns, and occasional time spent underwater.

Cool heat-sensitive electronics without having to hardwire your fan—these kits include the fan, guard, and power cord.

With the addition of a thermostat, the fans in these kits switch on only when needed.

To keep unenclosed electronic components cool, place trays on top of equipment to direct a stream of air below.

Made of conductive metal, these guards cover fans to block EMI (electromagnetic interference) and RFI (radio frequency interference).

Also known as crossflow blowers, these create a wider stream of air than other equipment-cooling blowers.

Operate these fans with a DC power source.

Slide these trays in to cool your standard 19" wide enclosure.

Able to withstand dust and water splashes, these fans are IP54 rated.

To quickly dry flat surfaces, these fans direct air downward.

Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Control consumption and noise by adjusting the airflow.

Extend these telescoping nozzles to increase your reach.

These nozzles are made of FDA-listed materials.

These needle-style nozzles force air to a precise pinpoint.

Blow air backward to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Choose a base, hose, and nozzle for a custom setup.

Convert your blowgun to a spray gun. These nozzles spray air and liquids at the same time.

Blow debris and sweep it away with the built-in brush.

The lightweight plastic construction makes these blowguns more comfortable to hold than metal.

Compact enough to carry with you, these guns have a built-in quick-disconnect hose coupling for easy connection to an air line.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.

The extra length lets you access hard-to-reach areas.

These guns include a rubber tip that won't damage your workpiece.

Increase your reach with the telescoping nozzle.

These blowguns provide more than two times the airflow of standard guns.

Clear dust and debris, test air ducts for leaks, and dry large surfaces without needing a compressed air line.

Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.

Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

These guns provide more than three times the airflow of standard static-eliminating blowguns.

Safely blow dust and debris off your clothes. These blowers are a safer alternative to compressed air and help you meet OSHA regulations.

Also known as siphon guns, these spray air and liquids at the same time. Push the lever and the airflow creates suction that draws water, cleaning solution, or other liquids through the hose.

A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.

Producing the same airflow as standard air knives, these are quieter and use 18% less compressed air.

Use one bracket for 3" to 18" wide air knives; two brackets for 24" to 42" wide air knives, and three brackets for 48" wide air knives.

Dry and cool parts, wipe conveyor belts, control coating depth, and blow liquid, chips, and dust off of equipment in sanitary environments.

These produce the same airflow as standard static-eliminating air knives but are quieter and use 15% less compressed air.