Add push-in cable holder to this adapter to mount cable to DIN rail.

Keep individual wires separate by laying them between the coils on these holders.

Use these plastic mounts with metal-detector-grade cable ties when detection and retrieval is essential, such as in food processing applications. Mounts are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

Often used to secure vertical running material, these mounts maintain space between a bundle and a surface.

Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.

Bundle and secure cable, wire, and hose.

Identify bundles at a glance.

Often used as tamper seals and in tagging applications, these ties create a consistent loop size every time.

These ties are less likely to crack and break from dryness than regular cable ties.

These strong, wide ties are often used as an alternative to metal strapping.

Create custom-length cable ties for large bundles and heavy materials.

The tail slots into the head to create a temporary loop to hold wires. Hook and unhook the loop to add additional wires before permanently cinching the tie.

The head of these cable ties is contoured to fit against pipe, tubing, and other round material for a tight fit.

The rounded, low-profile head keeps these ties from snagging and allows them to fit in tight spaces.

Protect sensitive electronic equipment from static buildup.

These ties meet UL flammability requirements.

These ties are less likely to crack and break from dryness than regular cable ties.

Keep an assortment of cable ties on hand.

Attach with a screw or other fastener.

Quickly attach and detach a bundle.

Feed a bundle through the closed loop and wrap the ends around pipe or conduit for support.

Ties are made from heat-resistant fabric to withstand high temperatures.

The buckle allows you to cinch these ties tight.

These ties stretch to hold material tightly without slipping.

These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.

These ties meet UL flammability requirements.

Create custom-length ties from a roll with hook on one side and loop on the other.

Create a cable tie with a buckle—no sewing required.

Keep a set of these differently sized cable ties on hand to use when you need them. They're flexible, reusable, adjustable.

Woven from flexible stainless steel yarn and Nomex, these ties handle temperatures up to 850° F.

Use in light duty applications such as tagging and attaching documentation to equipment.

Create custom-length ties for bundling delicate materials.

These ties have a loop on each end that can be twisted around each other for a secure closure.

Create strong and durable custom-length ties with a hard rubber coating and wire core.

Secure large bundles such as lumber, cardboard, and wire coils.

The plastic coating on these ties adds an additional level of corrosion and abrasion resistance over other stainless steel cable ties.

For use in the harshest environments, these ties withstand chemicals and UV rays.

Stamp or emboss these ties to identify material.

Cut rolls to length and add the no-sew buckle.

Also known as lashing straps, use these to tightly secure material.

The evenly spaced ball-shaped beads allow you to adapt to changes in bundle size.

For use with a single line, these plastic clamps reduce wear on softer materials, such as tubing and cable, and prevent corrosion caused by metal-to-metal contact.

Join these clamps together to line up multiple pipes, cables, or tubes side-by-side, even when they are different sizes.

For use on a single line, these polypropylene clamps withstand moisture and most chemicals. They're commonly used to route tubing in compressed air systems. A folding arm closes to secure material.

Flexible grooves inside these polypropylene clamps allow material to expand and contract. Clamps are moisture and chemical resistant.

Mount parallel lines of pipe, tubing, or conduit directly against the mounting surface.

Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.

Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.

For a more secure connection than rail- and adhesive-mount clamps, weld the bottom plate of these clamps onto your rails. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.

For use with a single line, these clamps mount directly onto rails, no adhesive or welding required. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

Compared to metal loop clamps, plastic loop clamps reduce wear on soft materials, such as tubing and cable. Clamps are nonconductive and noncorrosive.

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface.

Clip these hangers onto the side of threaded rod. Unlike other threaded-rod-mount hangers, you can use more than one hanger on the same rod to organize multiple lines of pipe, tubing, and conduit.

Also known as conduit hangers, these hangers load from the bottom so you can add or remove material without removing the mounted hanger.

Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers.

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Connect these hangers to organize multiple lines of pipe, tubing, and conduit. The tight-fitting, santoprene body reduces vibration and prevents corrosion caused by metal-to-metal contact.

Also known as pipe shields, these cradles provide additional support and prevent insulation from tearing when routing insulated pipe through loop hangers.

Access material quickly without uninstalling the mounted hanger. These hangers have a removable bolt for loading pipe, tube, and conduit from the side. Combine them with a threaded rod or other fastener to hang from the ceiling.

A roller on the bottom of these hangers compensates for movement due to expansion and contraction, such as in hydraulic applications. Combine with a threaded rod or other fastener to hang from the ceiling.

Use these close-fitting hangers for a more rigid hold around material than when using straps alone.

For a strong, secure connection, mount these hangers by welding them to a rod.

Reduce movement in your line with hangers that are more rigid than strap hangers and fit tighter around pipe, conduit, and tube than loop hangers.

Keep multiple bundles of wire and cable on separate hooks. The hooks have wide openings to allow access for installation, adjustment, and removal.

These plastic rings won't conduct electricity. Also known as distribution rings, they have a large opening for routing multiple cables. A smooth surface prevents damage to wire and cable.

Hang these S-hooks from fencing and railing to route large bundles of material, such as cable, hose, and wire through your facility or worksite to avoid tripping hazards.

Hang cable and other flexible material beneath wire to prevent it from sagging and swaying. To install, hook the two ends of the ring around the wire—no fasteners required.

Suspend and route flat-bottomed objects such as strut channel and small duct.

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

A mounting plate provides a more secure hold at the mounting surface.

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.