A filter and regulator joined top-to-bottom, these filter/regulators trap particles and maintain pressure in your compressed air line. They connect to other SMC units of the same series with joiner clamps, so you can customize your air preparation system.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

Connect these filter/regulators to other Aventics units of the same series with joiner clamps to customize your air preparation system. A filter and regulator joined top-to-bottom, they provide clean, compressed air at the pressure you need.

A filter and regulator stacked together, these filter/regulators clean your compressed air and maintain the pressure. They connect to other ARO units of the same series with joiner clamps—even if the pipe sizes are slightly different—so you can customize your air preparation system.

With ±0.8% accuracy, these filter/regulators react to smaller pressure changes than our other compressed air filter/regulators.

Built with a brass housing and a polyurethane bowl, these filter/regulators hold up to cleaning fluid, synthetic compressor oil, and other harsh chemicals.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets. The filter and regulator are joined top-to-bottom, so they fit in the same space as a filter alone.

No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.

Add these all-in-one units to your air supply to deliver clean, compressed air at the pressure you need. They work in two stages: the stacked filter/regulator removes large particles and sets the pressure, then the coalescing filter captures fine oil aerosols.